Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-29T14:49:54.111Z Has data issue: false hasContentIssue false

Relaxation of SiGe Films for the Fabrication of Strained Si Devices

Published online by Cambridge University Press:  02 August 2011

J.S. Maa
Affiliation:
Sharp Corporation, Tenri, Japan
D. J. Tweet
Affiliation:
Sharp Corporation, Tenri, Japan
J.J. Lee
Affiliation:
Sharp Corporation, Tenri, Japan
S.T. Hsu
Affiliation:
Sharp Corporation, Tenri, Japan
K. Fujii
Affiliation:
Sharp Labs of America, Camas, WA and IC Group
T. Naka
Affiliation:
Sharp Labs of America, Camas, WA and IC Group
T. Ueda
Affiliation:
Sharp Labs of America, Camas, WA and IC Group
T. Baba
Affiliation:
Sharp Labs of America, Camas, WA and IC Group
N. Awaya
Affiliation:
Sharp Labs of America, Camas, WA and IC Group
K. Sakiyama
Affiliation:
Sharp Labs of America, Camas, WA and IC Group
Get access

Abstract

For the fabrication of bulk strained Si devices, a thin Si layer is deposited on a virtual substrate consisting of a several μm thick compositionally graded SiGe layer. A simpler approach utilizing H or He implantation to enhance relaxation of a thin SiGe film was recently reported. In this current work, hydrogen implantation is used to enhance the SiGe relaxation; and, relaxation beyond the previous reported limit is demonstrated. Experiments are performed on CVD deposited SiGe films with Ge fractions ranging from 20% to 40 % and thickness in the range of 100nm to about 500nm. After annealing at 800°C, relaxation of more than 80% is achieved. PMOS and NMOS devices are successfully fabricated and much enhanced hole and electron mobilities are demonstrated.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Welser, J., Hoyt, J.L., Takagi, S., and Gibbons, J.F., 1994 IEDM Conference Proceedings, p. 373 (1994).Google Scholar
[2] Rim, K., Hoyt, J.L., and Gibbons, J.F., IEEE Transactions on Electron Devices, Vol 47, 1406, (2000).Google Scholar
[3] Currie, M.T., Samavedam, S.B., Langdo, T.A., Leitz, C.W., and Fitzgerald, E.A., Appl. Phys. Lett., 72, 1718 (1998).Google Scholar
[4] Mantl, S., Holländer, B., Liedtke, R., S.Mesters, Herzog, H.J., Kibbel, H., and Hackbarth, T., Nuclear Instruments and Methods in Physics Research B 147, 29, (1999).Google Scholar
[5] Trinkaus, H., Holländer, B., Rongen, St., Mantl, S., Herzog, H.-J., Kuchenbecker, J., and Hackbarth, T., Appl. Phys. Lett., 76, 3552, (2000).Google Scholar
[6] Luysberg, M., Kirch, D., Trinkaus, H., Holländer, B., Lenk, St., Mantl, S., Herzog, H.-J., Hackbarth, T., and Fichtner, P.F.P., J. Appl. Phys., 92, 4290, (2002).Google Scholar