Hostname: page-component-8448b6f56d-c4f8m Total loading time: 0 Render date: 2024-04-25T06:38:33.672Z Has data issue: false hasContentIssue false
  • English
  • Français

Temperature Measurement for Rtp

Published online by Cambridge University Press:  21 February 2011

S. R. J. Brueck ,
Saleem H. Zaidi  and
M. K. Lang
S. R. J. Brueck
Affiliation:
Center for High Technology Materials, University of New Mexico, Albuquerque, NM 87131
Saleem H. Zaidi
Affiliation:
Center for High Technology Materials, University of New Mexico, Albuquerque, NM 87131
M. K. Lang
Affiliation:
Center for High Technology Materials, University of New Mexico, Albuquerque, NM 87131
Get access

Abstract

A non-contact temperature measurement technique based on diffraction-analysis monitoring of the thermal expansion of materials is discussed. Due to the need for noncontact temperature measurements during semiconductor processing, silicon was chosen for this demonstration. The diffraction method requires a grating of suitable spatial frequency etched on the surface of the silicon wafer. The diffraction angle from the grating depends on the grating period which varies with temperature. Two symmetrically disposed incident beams are used to provide a differential measurement which is relatively independent of sample tilt. A computer system is used to monitor the diffraction order movement, from the order separation a relative temperature change can be calculated in near real-time. Temperature sensitivity for the diffraction technique is inversely dependent on the grating length (number of lines) and independent of the grating width. A sensitivity of 0.75°C is demonstrated for a 3-mm wide grating over a 20-700°C temperature range.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 303: Symposium G – Rapid Thermal and Integrated Processing II , 1993 , 117
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Temperature. Quinn, T.J., [Academic Press, 2nd ed., 1990].Google Scholar
2 OS 900 Series Infrared Thermometer Operators Manual, Omega Engineering Inc, (1987).Google Scholar
3 Sato, T., Jour. Appl. Phys. 6, 339 (1967).Google Scholar
4 Donnelly, V.M., Jour. Vac. Sci. Tech. A8, 84 (1990).Google Scholar
5 Zaidi, S. H., Brueck, S. R. J., and McNeil, J. R., Jour. Vac. Sci. Tech. B10, 166 (1992)Google Scholar
6 Okada, Y. and Tokumaru, Y., Jour. Appl. Phys. 56, 314 (1984).Google Scholar
7 Goodman, J W, Introduction to Fourier Optics (McGraw-Hill, 1968)Google Scholar