Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-19T20:13:28.176Z Has data issue: false hasContentIssue false
  • English
  • Français

Hydrogenation of nanocrystalline Mg-based alloys

Published online by Cambridge University Press:  26 February 2011

Daniela Zander ,
Lyudmilla Lyubenova ,
Uwe Köster ,
Thomas Klassen  and
Martin Dornheim
Daniela Zander
Affiliation:
Dept. Chem. Eng., University of Dortmund, D-44221 Dortmund, Germany
Lyudmilla Lyubenova
Affiliation:
Dept. Chem. Eng., University of Dortmund, D-44221 Dortmund, Germany
Uwe Köster
Affiliation:
Dept. Chem. Eng., University of Dortmund, D-44221 Dortmund, Germany
Thomas Klassen
Affiliation:
Institute for Materials Research, GKSS Research Centre, D-21502 Geesthacht, Germany
Martin Dornheim
Affiliation:
Institute for Materials Research, GKSS Research Centre, D-21502 Geesthacht, Germany
Get access

Abstract

Desirable properties of hydrogen storage in materials include mainly, high hydrogen capacity, high number of hydride / dehydride cycles, low temperature of dissociation and microstructural stability. Hydrogen storage can proceed from the gas phase as well as during cathodic charging.

The use of nanocrystalline Mg powder without and with 2 mol% Nb2O5 catalyst as an electrode material for electrochemical hydrogen charging processes in a 6M KOH electrolyte was studied. A strong influence of the compaction parameters and the current density but no influence of the catalyst on the hydrogenation behavior was observed. However, a strong influence of the catalyst on the hydrogen overpotential was observed and is assumed to result into a change of the electrochemical surface reaction. The addition of graphite and PTFE to the Mg/Nb2O5electrodes improves the charging kinetic as well as the hydrogen content up to 1 wt.% hydrogen.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 801: Symposium BB – Materials and Technologies for a Hydrogen Economy , 2003 , BB3.1
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gross, K., Spatz, P., Züttel, A., Schlapbach, L., J. Alloys Comp. 240 206, (1996).Google Scholar
2. Cui, N., Luan, B., Liu, H.K., Zhao, H.J., Dou, S.X., J. Power Sources 55 163, (1995).Google Scholar
3. Chen, C.P., Liu, B.H., Li, Z.P., Wu, J., Wang, Q.D., Z. Phys. Chem. 181 259, (1993).Google Scholar
4. Schlapbach, L., Hydrogen in Intermetallic Compounds II, ch. Surface properties and activation. Topics in Applied Physics, 1992 Google Scholar
5. Zaluska, A., Zaluski, L., Ström-Oslen, J.O., J. Alloys and Comp. 288, 217 (1999).Google Scholar
6. Oelerich, W., Klassen, T., Bormann, R., J. Alloys and Comp. 315, 2372 (2001).Google Scholar
7. Barkhordarian, G., Klassen, T., Bormann, R., Scripta Mat. 49, 213 (2003).Google Scholar
8. Barkhordarian, G., Klassen, T., Bormann, R., J. Alloys and Comp., (2003) (in press).Google Scholar