Hostname: page-component-76fb5796d-r6qrq Total loading time: 0 Render date: 2024-04-25T09:26:47.804Z Has data issue: false hasContentIssue false
  • English
  • Français

Three-dimensional study by synchrotron radiation computed tomography of melt distribution in samples doped to enhance contrast

Published online by Cambridge University Press:  02 January 2018

Susumu Ikeda ,
Tsukasa Nakano ,
Akira Tsuchiyama ,
Kentaro Uesugi ,
Yoshito Nakashima ,
Koichi Nakamura ,
Hideto Yoshida  and
Yoshio Suzuki
Susumu Ikeda*
Affiliation:
WPI-Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, Sendai 980-8577, Japan Institute of Mineralogy, Petrology and Economic Geology, Graduate School of Science, Tohoku University, Sendai 980-8578, Japan
Tsukasa Nakano
Affiliation:
Geological Survey of Japan, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8567, Japan
Akira Tsuchiyama
Affiliation:
Division of Earth and Planetary Sciences, Graduate School of Science, Kyoto University, Kitashirakawa Oiwakecho, Kyoto 606–8502, Japan
Kentaro Uesugi
Affiliation:
Japan Synchrotron Radiation Research Institute (JASRI/SPring-8), Mikazuki, Hyogo 679-5198, Japan
Yoshito Nakashima
Affiliation:
Geological Survey of Japan, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8567, Japan
Koichi Nakamura
Affiliation:
Geological Survey of Japan, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8567, Japan
Hideto Yoshida
Affiliation:
Department of Earth and Planetary Science, Graduate School of Science, The University of Tokyo, Bunkyo-ku, Tokyo 113-0033, Japan
Yoshio Suzuki
Affiliation:
Japan Synchrotron Radiation Research Institute (JASRI/SPring-8), Mikazuki, Hyogo 679-5198, Japan
*
*E-mail: sikeda@m.tohoku.ac.jp
Get access Rights & Permissions [Opens in a new window]

Abstract

The three-dimensional distribution of melt in partially molten synthetic samples compositionally corresponding to diopside (90 wt.%)–anorthite (10 wt.%) and doped with PbO, WO3, MoO3, or Cs2O to enhance contrast was studied by X-ray computed tomography (CT) with synchrotron radiation. The heavy elements were strongly concentrated in the melt and contributed to an increase of the X-ray linear attenuation coefficient (LAC) of it. PbO was found to be compatible with silicate melt (>20 wt.% in solution) and incompatible with diopside crystals. Other oxides WO3 (∼10 wt.%), MoO3 (∼5 wt.%) and Cs2O (< 5 wt.%) are also soluble only in the melt. Such doping is useful not only for LAC control in X-ray CT measurements, but also for systematic control of the structure (wetting properties, distribution and connectivity) of partial melt. This technique gives basic information for discussion of the 3D distribution of partial melt having different wetting properties. As PbO was most effective in visualization of the diopside–anorthite partially molten system, CT images of the PbO-bearing sample were used for further 3D investigation of distribution. A distribution of dihedral angles at solid-melt-solid triple junctions ranging from 22 to 55° was observed with the 3D data. This range in angle distribution was probably caused by anisotropy of crystals and the result supports the argument that there is some limitation in a theoretical framework of stereology which estimates the 3D structure based on 2D observations. Investigators have begun to apply X-ray CT to the study of the 3D distribution of partial melts in rocks using synchrotron radiation. Our study on the effect of doping is one approach for developing a technique to investigate 3D melt distribution.

Keywords

partial meltingX-ray computed tomographysynchrotron radiationdopingcontrast enhancement3D observationsdihedral angles
Type
Research Article
Information
Mineralogical Magazine , Volume 81 , Issue 5 , October 2017 , pp. 1203 - 1222
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2017

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Beere, W. (1975) A unifying theory of the stability of penetrating liquid phases and sintering pores. Acta Metallurgica, 23, 131–138.CrossRefGoogle Scholar
Bonse, U. and Busch, F. (1996) X-ray computed microtomography (μCT) using synchrotron radiation (SR). Progress in Biophysics and Molecular Biology, 65, 133–169.CrossRefGoogle Scholar
Bottinga, Y. and Weill, D. (1972) The viscosity of magmatic silicate liquids; a model calculation. American Journal of Science, 272, 438–475.CrossRefGoogle Scholar
Bottinga, Y., Weill, D. and Richet, P. (1982) Density calculations for silicate liquids. I. Revised method for aluminosilicate compositions. Geochimica et Cosmochimica Acta, 46, 909–919.CrossRefGoogle Scholar
Brown, M.A., Brown, M., Carlson, W.D. and Denison, C. (1999) Topology of syntectonic melt-flow networks in the deep crust: interfaces from three-dimensional images of leucosome geometry in migmatites. American Mineralogist, 84, 1793–1818.CrossRefGoogle Scholar
Bulau, J.R., Waff, H.S. and Tyburczy, J.A. (1979) Mechanical and thermodynamic constraints on fluid distribution in partial melts. Journal of Geophysical Research: Solid Earth, 84, 6102–6108.CrossRefGoogle Scholar
Cmíral, M., FitzGerald, J.D., Faul, U.H. and Green, D.H. (1998) A close look at dihedral angles and melt geometry in olivine-basalt aggregates: a TEM study. Contributions to Mineralogy and Petrology, 130, 336–345.Google Scholar
Cooper, R.F. and Kohlstedt, D.L. (1986) Rheology and structure of olivine-basalt partial melts. Journal of Geophysical Research: Solid Earth, 91, 9315–9323.CrossRefGoogle Scholar
Denison, C., Carlson, W.D. and Ketcham, A. (1997) Three-dimensional quantitative textural analysis of metamorphic rocks using high-resolution computed X-ray tomography: Part I. Methods and techniques. Journal of Metamorphic Geology, 15, 29–44.CrossRefGoogle Scholar
Desbois, G., Urai, J.L., Perez-Willard, F., Radi, Z., Offern, S., Burkart, I., Kukla, P.A. and Wollenberg, U. (2013) Argon broad ion beam tomography in a cryogenic scanning electron microscope: a novel tool for the investigation of representative microstructures in sedimentary rocks containing pore fluid. Journal of Microscopy, 249, 215–235.CrossRefGoogle Scholar
Ebel, D.S. and Rivers, M.L. (2007) Meteorite 3D synchrotron microtomography: methods and applications. Meteoritics and Planetary Science, 42, 1627–1646.CrossRefGoogle Scholar
Faul, U.H. (2000) Constrains on the melt distribution in anisotropic polycrystalline aggregates undergoing grain growth. Pp. 3–28 in: Physics and Chemistry of Partially Molten Rocks (Bagdassarov, N., Laporte, D. and Thompson, A.B., editors). Kluwer Academic Publishers, Dordrecht, The Netherlands.Google Scholar
Flannery, B.P., Deckman, H.W., Roberge, W.G. and D’Amico, K.L. (1987) Three-dimensional X-ray microtomography. Science, 237, 1439–1444.CrossRefGoogle ScholarPubMed
German, R.M. (1985) Liquid Phase Sintering. Plenum Publishing Corporation, New York.CrossRefGoogle Scholar
Goto, S., Takeshita, K., Suzuki, Y., Ohashi, H., Asano, Y., Kimura, H., Matsushita, T., Yagi, N., Isshiki, M., Yamazaki, H., Yoneda, Y., Umetani, K. and Ishikawa, T. (2001) Construction and commissioning of a 215- m-long beam line at SPring-8. Nuclear Instruments and Methods in Physics Research Section A, 467–468, 682–685.CrossRefGoogle Scholar
Harker, D. and Parker, E.R. (1945) Grain shape and grain growth. Transactions of the American Society for Metals, 34, 156–201.Google Scholar
Hersum, T., Hilpert, M. and Marsh, B. (2005) Permeability and melt flow in simulated and natural partially molten basaltic magmas. Earth and Planetary Science Letters, 237, 798–814.CrossRefGoogle Scholar
Higgins, M.D. (2006) Quantitative Textural Measurements in Igneous and Metamorphic Petrology. Cambridge University Press, Cambridge.CrossRefGoogle Scholar
Holness, M.B. (2006) Melt–solid dihedral angles of common minerals in natural rocks. Journal of Petrology, 47, 791–800.CrossRefGoogle Scholar
Holness, M.B., Cheadle, M.J. and McKenzie, D. (2005) On the use of changes in dihedral angle to decode latestage textural evolution in cumulates. Journal of Petrology, 46, 1565–1583.CrossRefGoogle Scholar
Hubbell, J.H. and Seltzer, S.M. (2004), Tables of X-Ray Mass Attenuation Coefficients and Mass Energy- Absorption Coefficients (version 1.4). [Online] Available: http://physics.nist.gov/xaamdi [2017, Sept, 12]. National Institute of Standards and Technology, Gaithersburg, MD, USA.Google Scholar
Hunter, R.H. (1987) Textural equilibrium in layered igneous rocks. Pp. 473–503 in: Origins of Igneous Layering (Parsons, I., editor). D. Reidel Publishing Company, Dordrecht, The Netherlands.CrossRefGoogle Scholar
Ikeda, S., Nakano, T. and Nakashima, Y. (2000) Threedimensional study on the interconnection and shape of crystals in a graphic granite by X-ray CT and image analysis. Mineralogical Magazine, 64, 945–959.CrossRefGoogle Scholar
Ikeda, S., Toriumi, M., Yoshida, H. and Shimizu, I. (2002) Experimental study of the textural development of igneous rocks in the late stage of crystallization: the importance of interfacial energies under nonequilibrium conditions. Contributions to Mineralogy and Petrology, 142, 397–415.CrossRefGoogle Scholar
Ikeda, S., Kiguchi, M. and Saiki, K. (2004a) Valence band interorbital interaction at Al-Sn interface observed by ultraviolet photoemission spectroscopy: implication for phase relations in metallic binary systems. Philosophical Magazine, 84, 1671–1682.CrossRefGoogle Scholar
Ikeda, S., Nakano, T., Tsuchiyama, A., Uesugi, K., Suzuki, Y., Nakamura, K., Nakashima, Y. and Yoshida, H. (2004b) Nondestructive threedimensional element-concentration mapping of a Cs-doped partially molten granite by X-ray computed tomography using synchrotron radiation. American Mineralogist, 89, 1304–1313.CrossRefGoogle Scholar
Ikeda, S., Nakano T., Tsuchiyama, A., Uesugi, K., Suzuki, Y., Nakamura, K., Nakashima, Y. and Yoshida, H. (2006) High resolution Cs-concentration mapping by X-ray CT: important data corrections for quantitative accuracy. Proceedings of the 8th International Conference on X-ray Microscopy, IPAP Conference Series, 7, 337–339.Google Scholar
Jerram, D.A. and Higgins, M.D. (2007) 3D analysis of rock texture: quantifying igneous microstructures. Elements, 3, 239–245.CrossRefGoogle Scholar
Jurewicz, S.R. and Jurewicz, A.J.G. (1986) Distribution of apparent angles on random sections with emphasis on dihedral angle measurements. Journal of Geophysical Research: Solid Earth, 91, 9277–9282.CrossRefGoogle Scholar
Karato, S. (1986) Does partial melting reduce the creep strength of the upper mantle? Nature, 319, 309–310.CrossRefGoogle Scholar
Ketcham, A. and Carlson, W.D. (2001) Acquisition, optimization and interpretation of X-ray computed tomographic imagery: application to the geosciences. Computers and Geosciences, 27, 381–00.CrossRefGoogle Scholar
Kingery, W.D., Bowen, H.K. and Ulhman, D.R. (1976) Introduction to Ceramics (second edition). Wiley, New York.Google Scholar
Kohlstedt, D.L., Bai, Q., Wang, Z.C. and Mei, S. (2000) Rheology of partially molten rocks. Pp. 3–28 in: Physics and Chemistry of Partially Molten Rocks (Bagdassarov, N., Laporte, D. and Thompson, A.B., editors). Kluwer Academic Publishers, Dordrecht, The Netherlands.CrossRefGoogle Scholar
Kress, V.C. and Carmichael, I.S.E. (1991) The compressibility of silicate liquids containing Fe2O3 and the effect of composition, temperature, oxygen fugacity and pressure on their redox states. Contributions to Mineralogy and Petrology, 108, 82–92.CrossRefGoogle Scholar
Laporte, D. and Watson, E.B. (1995) Experimental and theoretical constraints on the melt distribution in crustal sources: the effect of crystalline anisotropy on melt interconnectivity. Chemical Geology, 124, 161–184.CrossRefGoogle Scholar
Laporte, D. and Provost, A. (2000) The grain-scale distribution of silicate, carbonate and metallosulfide partial melts: a review of theory and experiments. Pp. 93–140 in: Physics and Chemistry of Partially Molten Rocks (Bagdassarov, N., Laporte, D. and Thompson, A.B., editors). Kluwer Academic Publishers, Dordrecht, The Netherlands.CrossRefGoogle Scholar
Lupulescu, A. and Watson, E.B. (1999) Low melt fraction connectivity of granitic and tonalitic melts in a mafic crustal rock at 800°C and 1 GPa, Contributions to Mineralogy and Petrology, 134, 202–216.CrossRefGoogle Scholar
Mangipudi, K.I., Radisch, V., Holzer, L. and Volkert, C.A. (2016) A FIB-nanotomography method for accurate 3D reconstruction of open nanoporous structures. Ultramicroscopy, 163, 38–47.CrossRefGoogle ScholarPubMed
Massalski, T.B., Okamoto, H., Subramanian, P.R. and Kacprzak, L. (editors) (1990) Binary Alloy Phase Diagrams, 2nd Edition. American Society for Metals, Ohio, USA.Google Scholar
Mavko, G.M. (1980) Velocity and attenuation in partially molten rocks. Journal of Geophysical Research: Solid Earth, 85, 5173–5189.CrossRefGoogle Scholar
McGrouther, D. and Munroe, P.R. (2007) Imaging and analysis of 3D structure using a dual beam FIB. Microscopy Research and Technique, 70, 186–194.CrossRefGoogle Scholar
Mckenzie, D.P. (1984) The generation and compaction of partially molten rock. Journal of Petrology, 25, 713–765.CrossRefGoogle Scholar
Nakamura, K., Tsuchiyama, A., Nakano, T. and Uesugi, K. (2003) Quantitative evaluation of the relation between X-ray linear attenuation coefficient and CT values, and its application to 3D element distribution of micrometeorites. Pp. 95–96 in: Abstracts, International Symposium on Evolution of Solar System Materials: a New Perspective from Antarctic Meteorites. National Institute of Polar Research, Tokyo.Google Scholar
Nakamura, T., Tsuchiyama, A., Akaki, T., Uesugi, K., Nakano, T., Takeuchi, A., Suzuki, Y. and Noguchi, T. (2008a) Bulk mineralogy and three dimensional structures of individual Stardust particles deduced from synchrotron X-ray diffraction and microtomography analysis. Meteoritics and Planetary Science, 43, 247–259.CrossRefGoogle Scholar
Nakamura, T., Noguchi, T., Tsuchiyama, A., Ushikubo, T., Kita, N.T., Valley, J.W., Zolensky, M.E., Kakazu, Y., Sakamoto, K., Mashio, E., Uesugi, K. and Nakano, T. (2008b) Chondrule-like objects in short-period comet 81P/Wild 2. Science, 321, 1664–1667.CrossRefGoogle Scholar
Nakano, T. and Fujii, N. (1989) The multiphase grain control percolation: its implication for a partially molten rock. Journal of Geophysical Research: Solid Earth, 94, 15653–15661.CrossRefGoogle Scholar
Nakano, T., Nakashima, Y., Nakamura, K. and Ikeda, S. (2000) Observation and analysis of internal structure of rock using X-ray CT [in Japanese with English abstract]. The Journal of the Geological Society of Japan, 106, 363–378.CrossRefGoogle Scholar
Nakashima, Y., Nakano, T., Nakamura, K., Uesugi, K., Tsuchiyama, A. and Ikeda, S. (2004) Three-dimensional diffusion of non-sorbing species in porous sandstone: computer simulation based on X-ray microtomography using synchrotron radiation. Journal of Contaminant Hydrology, 74, 253–264.CrossRefGoogle ScholarPubMed
Okumura, S., Nakamura, M., Tsuchiyama, A., Nakano, T. and Uesugi, K. (2008) Evolution of bubble microstructure in sheared rhyolite: formation of a channellike bubble network. Journal of Geophysical Research: Solid Earth, 113, B07208.CrossRefGoogle Scholar
Park, H.H. and Yoon, D.N. (1985) Effect of dihedral angle on the morphology of grains in a matrix phase. Metallurgical Transactions A, 16, 923–928.CrossRefGoogle Scholar
Philpotts, A.R., Brustman, C.M., Shi, J., Carlson, W.D. and Denison, C. (1999) Plagioclase-chain networks in slowly cooled basaltic magma. American Mineralogist, 84, 1819–1829.CrossRefGoogle Scholar
Remeysen, K. and Swennen, R. (2008) Application of microfocus computed tomography in carbonate reservoir characterization: possibilities and limitations. Marine and Petroleum Geology, 25, 486–499.CrossRefGoogle Scholar
Riegger, O.K. and Van Vlack, L.H. (1960) Dihedral angle measurement. Transactions of the Metallurgical Society of AIME, 218, 933–935.Google Scholar
Rivers, M.L., Sutton, S.R. and Eng, P.J. (1999) Geoscience application of x-ray computed microtomography. Proceedings of SPIE, Developments in X-Ray Tomography II, 3772, 78–86.CrossRefGoogle Scholar
Schäfer, F.N. and Foley, S.F. (2002) The effect of crystal orientation on the wetting behavior of silicate melts on the surfaces of spinel peridotite minerals. Contributions to Mineralogy and Petrology, 143, 254–261.Google Scholar
Shi, C.Y., Zhang, L., Yang, W., Liu, Y., Wang, J., Meng, Y., Andrews, J.C. and Mao, W.L. (2013) Formation of an interconnected network of iron melt at Earth's lower mantle conditions. Nature Geoscience, 6, 971–975.CrossRefGoogle Scholar
Shimizu, I. and Takei, Y. (2005) Thermodynamics of interfacial energy in binary metallic systems: influence of adsorption on dihedral angles. Acta Materiala, 53, 811–821.CrossRefGoogle Scholar
Suzuki, Y., Usami, K., Sakamoto, K., Kozaka, H., Hirano, T., Shiono, H. and Kohno, H. (1988) X-ray computerized tomography using monochromated synchrotron radiation. Japanese Journal of Applied Physics, 27, L461–L464.CrossRefGoogle Scholar
Takano, H., Suzuki, Y., Uesugi, K., Takeuchi, A. and Yagi, N. (2001) PSF measurement of imaging detectors with an X-ray microbeam. Proceedings of SPIE, 4499, 126–133.CrossRefGoogle Scholar
Takei, Y. (2000) Acoustic properties of partially molten media studied on a simple binary system with a controllable dihedral angle. Journal of Geophysical Research: Solid Earth, 105, 16665–16682.CrossRefGoogle Scholar
Takei, Y. and Shimizu, I. (2003) The effects of liquid composition, temperature, and pressure on the equilibrium dihedral angles of binary solid-liquid systems inferred from lattice-like model, Physics of the Earth and Planetary Interiors, 139, 225–242.CrossRefGoogle Scholar
Thompson, A.C., Llacer, J., Finman, L.C., Hughes, E.B., Otis, J.N., Wilson, S. and Zeman, H.D. (1984) Computed tomography using synchrotron radiation. Nuclear Instruments and Methods in Physics Research, 222, 319–323.CrossRefGoogle Scholar
Timashev, V.V. (1980) The kinetics of clinker formation. The structure and composition of clinker and its phases. Proceedings of the 7th International Congress on the Chemistry of Cement, Paris, France, I, I-3, 1–20.Google Scholar
Toramaru, A. and Fujii, N. (1986) Connectivity of melt phase in a partially molten peridotite. Journal of Geophysical Research: Solid Earth, 91, 9239–9252 CrossRefGoogle Scholar
Tsuchiyama, A., Uesugi, K., Noguchi, T., Yano, H., Nakano, T. and Suzuki, Y. (2001) Three-dimensional microstructures of Antarctic micrometeorites by X-ray computed tomography using synchrotron radiation at SPring-8. Meteoritics and Planetary Science, 36, Supplement A210.Google Scholar
Tsuchiyama, A., Uesugi, K., Nakano, T. and Ikeda, S. (2005) Quantitative evaluation of attenuation contrast of X-ray computed tomography images using monochromatized beams, American Mineralogist, 90, 132–142.CrossRefGoogle Scholar
Tsuchiyama, A., Nakamura, T., Okazaki, T., Uesugi, K., Nakano, T., Sakamoto, K., Akaki, T., Iida, Y., Kadono, T., Jogo, K. and Suzuki, Y. (2009) Three-dimensional structures and elemental distributions of Stardust impact tracks using synchrotron microtomography and x-ray fluorescence analysis. Meteoritics and Planetary Science, 44, 1203–1224.CrossRefGoogle Scholar
Tsuchiyama, A., Uesugi, M., Matsushima, T., Michikami, T., Kadono, T., Nakamura, T., Uesugi, K., Nakano, T., Sandford, S.A., Noguchi, R., Matsumoto, T., Matsuno, J., Nagano, T., Imai, Y., Takeuchi, A., Suzuki, Y., Ogami, T., Katagiri, J., Ebihara, M., Ireland, T.R., Kitajima, F., Nagao, K., Naraoka, H., Noguchi, T., Okazaki, R., Yurimoto, H., Zolensky, M.E., Mukai, T., Abe, M., Yada, T., Fujimura, A., Yoshikawa, M. and Kawaguchi, J. (2011) Three-dimensional structure of Hayabusa samples: origin and evolution of Itokawa regolith. Science, 333, 1125–1128.CrossRefGoogle ScholarPubMed
Tsuchiyama, A., Nakano, T., Uesugi, K., Uesugi, M., Takeuchi, A., Suzuki, Y., Noguchi, R., Matsumoto, T., Matsuno, J., Nagano, T., Imai, Y., Nakamura, T., Ogami, T., Noguchi, T., Abe, M., Yada, T. and Fujimura, A. (2013) Analytical dual-energymicrotomography: a new method for obtaining three-dimensional mineral phase images and its application to Hayabusa samples. Geochimica et Cosmochimica Acta, 116, 5–16.CrossRefGoogle Scholar
Tsuchiyama, A., Uesugi, M., Uesugi, K., Nakano, T., Noguchi, R., Matsumoto, T., Matsuno, J., Nagano, T., Imai, Y., Shimada, A., Takeuchi, A., Suzuki, Y., Nakamura, T., Noguchi, T., Abe, M., Yada, T. and Fujimura, A. (2014) Three-dimensional microstructure of samples recovered from asteroid 25143 Itokawa: comparison with LL5 and LL6 chondrite particles. Meteoritics and Planetary Science, 49, 172–187.CrossRefGoogle Scholar
Uesugi, K., Tsuchiyama, A., Nakano, T., Suzuki, Y., Yagi, N., Umetani, K. and Kohmura, Y. (1999) Development of micro-tomography imaging system for rock and mineral samples. Proceedings of SPIE, Developments in X-Ray Tomography II, 3772, 214–221.CrossRefGoogle Scholar
Uesugi, K., Suzuki, Y., Yagi, N., Tsuchiyama, A. and Nakano, T. (2001) Development of high spatial resolution X-ray CT system at BL47XU in SPring-8. Nuclear Instruments and Methods in Physics Research Section A, 467–468, 853–856.CrossRefGoogle Scholar
von Bargen, N. and Waff, H.S. (1986) Permeabilities, interfacial areas and curvatures of partially molten systems: results of numerical computations of equilibrium microstructures. Journal of Geophysical Research: Solid Earth, 91, 9261–9276.CrossRefGoogle Scholar
Waff, H.S. and Bulau, J.R. (1979) Equilibrium fluid distribution in an ultramafic partial melt under hydrostatic stress conditions. Journal of Geophysical Research: Solid Earth, 84, 6109–6114.CrossRefGoogle Scholar
Watson, E.B. (1999) Lithologic partitioning of fluids and melts. American Mineralogist, 84, 1693–1710.CrossRefGoogle Scholar
Wellington, S.L. and Vineger, H.J. (1987) X-ray computerized tomography. Journal of Petroleum Technology, 39, 885–898.CrossRefGoogle Scholar
Zhu, W., Gaetani, G.A., Fusseis, F., Montési, L.G.J. and De Carlo, F. (2011) Microtomography of partially molten rocks: three-dimensional melt distribution in mantle peridotite. Science, 332, 88–91.CrossRefGoogle ScholarPubMed