Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-19T01:06:09.748Z Has data issue: false hasContentIssue false
  • English
  • Français

Enhanced Strain in Electrochemical Deformation of Polypyrrole Film doped with Sulfonated Polyaniline

Published online by Cambridge University Press:  01 February 2011

Akihisa Tanaka ,
Wataru Takashima  and
Keiichi Kaneto
Akihisa Tanaka
Affiliation:
Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Wakamatsu, Kitakyushu 808–0196, Japan
Wataru Takashima
Affiliation:
Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Wakamatsu, Kitakyushu 808–0196, Japan
Keiichi Kaneto
Affiliation:
Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Wakamatsu, Kitakyushu 808–0196, Japan
Get access

Abstract

Composite films of polypyrrole (PPy) and poly(2-methoxyaniline-5-sulfonic acid) (PMAS) have been electrodeposited from aqueous electrolytes solution consisting of pyrrole and various ratios of dodecylbenzene sulfonic acid (DBS) and PMAS. The obtained PPy(DBS/PMAS) films exhibited different characteristics in water contents, surface morphology and electrochemomechanical deformations (ECMD) depending on the content of PMAS. A film having the content of PPy(95%DBS/5%PMAS) simply showed the large cathodic ECMD with the strain of 6.1% in non-aqueous electrolyte solution of 0.1M tetrabutylammonium chloride/acetonitrile electrolyte. The improvement of cathodic ECMD is conjectured to the large porosity of the composite film. The ECMD behaviors of the films operated in various electrolyte solutions including aqueous solution are also reported.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 855: Symposium W – Mechanically Active Materials , 2004 , W3.4
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Baughman, R.H., Synth. Met. 78, 339 (1996).Google Scholar
2. Bay, L., West, K., Sommer-Larsen, P., Skaarup, S., Benslimane, M., Adv. Mater. 15, 310 (2003).Google Scholar
3. Hara, S., Zama, T., Takashima, W., Kaneto, K., J. Mater. Chem. 14, 1516 (2004).Google Scholar
4. Takashima, W., Kanamori, K., Kaneto, K., Sens. Actuators B, accepted for publication.Google Scholar
5. Pei, Q., Inganäs, O., Synth. Met. 55, 3718 (1993).Google Scholar
6. Skaarup, S., West, K., Gunaratne, L.M.W.K., Vidanapathirana, K.P., Careem, M.A., Solid State Ionics 136–137, 577 (2000).Google Scholar
7. Takashima, W., Pandey, S. S., Kaneto, K., Thin Solid Films 438, 339 (2003).Google Scholar
8. Tanaka, A., Takashima, W., Kaneto, K., Chem. Lett. 33, 1470 (2004).Google Scholar
9. Kang, H.C., Geckeler, K.E., Polym. Comm. 41, 6931 6931 (2000).Google Scholar
10. Nakashima, T., Kumar, D., Takashima, W., Zama, T., Hara, S., Sewa, S., Kaneto, K., Curr. Appl. Phys. 5, 202 (2005).Google Scholar