Hostname: page-component-7c8c6479df-94d59 Total loading time: 0 Render date: 2024-03-29T00:00:56.624Z Has data issue: false hasContentIssue false

Effect of intercritical temperature on quenching and partitioning steels originated from martensitic pre-microstructure

Published online by Cambridge University Press:  20 October 2014

Ran Ding
Affiliation:
Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, People's Republic of China; Beijing Laboratory of Metallic Materials and Processing for Modern Transportation, Beijing 100083, People's Republic of China; and National Engineering Research Center of Advanced Rolling, Beijing 100083, People's Republic of China
Di Tang
Affiliation:
Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, People's Republic of China; Beijing Laboratory of Metallic Materials and Processing for Modern Transportation, Beijing 100083, People's Republic of China; and National Engineering Research Center of Advanced Rolling, Beijing 100083, People's Republic of China
Aimin Zhao*
Affiliation:
Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, People's Republic of China; Beijing Laboratory of Metallic Materials and Processing for Modern Transportation, Beijing 100083, People's Republic of China; and National Engineering Research Center of Advanced Rolling, Beijing 100083, People's Republic of China
Rui Dong
Affiliation:
Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, People's Republic of China
Junye Cheng
Affiliation:
Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, People's Republic of China
Xiang Meng
Affiliation:
Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, People's Republic of China
*
a)Address all correspondence to this author. e-mail: aimin.zhao@ustb.edu.cn
Get access

Abstract

The effect of the intercritical temperature on the microstructure and mechanical properties of a newly developed quenching and partitioning steel using martensitic microstructure prior to the heat treatment process was studied. Such a quenching and partitioning process possessed a unique microstructure evolution, especially during intercritical annealing after prequenching. Excellent mechanical properties were obtained due to this unique multiphase microstructure. Significant amount of interlath-retained austenite was acquired and the relationship between the microstructure and work-hardening behaviors was proposed. The martensite/austenite islands increased at elevated annealing temperature, which deteriorated the total elongation and increased the tensile strength as hard constituents when it was excessive. The result indicated that the present full martensitic microstructure before the intercritical annealing is probably more suitable to an industrial application and is a better way to produce high strength steels with suitable ductility.

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Kumar, A., Singh, S.B., and Ray, K.K.: Influence of bainite/martensite-content on the tensile properties of low carbon dual-phase steels. Mater. Sci. Eng., A 474(1), 270 (2008).Google Scholar
Zaefferer, S., Ohlert, J., and Bleck, W.: A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steel. Acta Mater. 52(9), 2765 (2004).CrossRefGoogle Scholar
Edmonds, D.V., He, K., Rizzo, F.C., De Cooman, B.C., Matlock, D.K., and Speer, J.G.: Quenching and partitioning martensite—A novel steel heat treatment. Mater. Sci. Eng., A 438, 25 (2006).Google Scholar
Speer, J.G., Matlock, D.K., De Cooman, B.C., and Schroth, J.G.: Carbon partitioning into austenite after martensite transformation. Acta Mater. 51(9), 2611 (2003).CrossRefGoogle Scholar
Xu, L., Yan, Z., Liu, Y., Li, H., Ning, B., and Qiao, Z.: Microstructure evolution and martensitic transformation behaviors of 9Cr–1.8 W–0.3 Mo ferritic heat-resistant steel during quenching and partitioning treatment. J. Mater. Res. 28(20), 2835 (2013).CrossRefGoogle Scholar
Tobata, J., Ngo-Huynh, K.L., Nakada, N., Tsuchiyama, T., and Takaki, S.: Role of silicon in quenching and partitioning treatment of low-carbon martensitic stainless steel. ISIJ Int. 52(7), 1377 (2012).Google Scholar
Wang, X.D., Zhong, N., Rong, Y.H., Hsu, T.Y., and Wang, L.: Novel ultrahigh-strength nanolath martensitic steel by quenching-partitioning-tempering process. J. Mater. Res. 24(1), 260 (2009).Google Scholar
Santofimia, M.J., Nguyen-Minh, T., Zhao, L., Petrov, R., Sabirov, I., and Sietsma, J.: New low carbon Q&P steels containing film-like intercritical ferrite. Mater. Sci. Eng., A 527(23), 6429 (2010).CrossRefGoogle Scholar
Matsumura, O., Sakuma, Y., and Takechi, H.: Enhancement of elongation by retained austenite in intercritical annealed 0.4 C-1.5 Si-0.8 Mn steel. Trans. Iron Steel Inst. Jpn. 27(7), 570 (1987).CrossRefGoogle Scholar
Cullity, B.D. and Stock, S.R.: Elements of X-ray Diffraction, Vol. 3 (Prentice Hall, New York, 2001), p. 484.Google Scholar
Jacques, P., Delannay, F., Cornet, X., Harlet, P., and Ladriere, J.: Enhancement of the mechanical properties of a low-carbon, low-silicon steel by formation of a multiphased microstructure containing retained austenite. Metall. Mater. Trans. A 32(11), 2759 (2001).Google Scholar
Lepera, F.S.: Improved etching technique for the determination of percent martensite in high-strength dual-phase steels. Metallography 12(3), 263 (1979).Google Scholar
Hara, T., Maruyama, N., Shinohara, Y., Asahi, H., Shigesato, G., Sugiyama, M., and Koseki, T.: Abnormal α to γ transformation behavior of steels with a martensite and bainite microstructure at a slow reheating rate. ISIJ Int. 49(11), 1792 (2009).CrossRefGoogle Scholar
Law, N.C. and Edmonds, D.V.: The formation of austenite in a low-alloy steel. Metall. Mater. Trans. A 11(1), 33 (1980).Google Scholar
Tsuchiyama, T., Miyamoto, Y., and Takaki, S.: Recrystallization of lath martensite with bulge nucleation and growth mechanism. ISIJ Int. 41(9), 1047 (2001).CrossRefGoogle Scholar
Galibois, A. and Dube, A.: Recrystallization kinetics of martensitic extra-low carbon steels. Can. Metall. Q. 3(4), 321 (1964).Google Scholar
Natori, M., Futamura, Y., Tsuchiyama, T., and Takaki, S.: Difference in recrystallization behavior between lath martensite and deformed ferrite in ultralow carbon steel. Scr. Mater. 53(5), 603 (2005).Google Scholar
Podder, A.S., Lonardelli, I., Molinari, A., and Bhadeshia, H.K.D.H.: Thermal stability of retained austenite in bainitic steel: An in situ study. Proc. R. Soc. A 467(2135), 3141 (2011).Google Scholar
Ikawa, H., Oshige, H., and Tanoue, T.: Effect of martensite-austenite constituent on HAZ toughness of a high strength steel. Trans. Jpn. Weld. Soc. 11(2), 87 (1980).Google Scholar
Ramos, L.F., Matlock, D.K., and Krauss, G.: On the deformation behavior of dual-phase steels. Metall. Mater. Trans. A 10(2), 259 (1979).Google Scholar
Ingarao, G., Lorenzo, R.D., and Micari, F.: Analysis of stamping performances of dual phase steels: A multi-objective approach to reduce springback and thinning failure. Mater. Des. 30(10), 4421 (2009).Google Scholar
Bhadeshia, H.K.D.H. and Edmonds, D.V.: Bainite in silicon steels: New composition–property approach. Part 1. Met. Sci. 17(9), 411 (1983).Google Scholar
Bhadeshia, H.K.D.H. and Edmonds, D.V.: Bainite in silicon steels: New composition–property approach. Part 2. Met. Sci. 17(9), 420 (1983).CrossRefGoogle Scholar
Bhadeshia, H.K.D.H. and Waugh, A.R.: Bainite: An atom-probe study of the incomplete reaction phenomenon. Acta Metall. 30(4), 775 (1982).Google Scholar
Miihkinen, V.T.T. and Edmonds, D.V.: Fracture toughness of two experimental high-strength bainitic low-alloy steels containing silicon. Mater. Sci. Technol. 3(6), 441 (1987).Google Scholar
Jacques, P.J., Delannay, F., and Ladrière, J.: On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metall. Mater. Trans. A 32(11), 2759 (2001).CrossRefGoogle Scholar
Lee, S., Lee, S.J., and De Cooman, B.C.: Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning. Scr. Mater. 65(3), 225 (2011).CrossRefGoogle Scholar
Santofimia, M.J., Zhao, L., Petrov, R., and Sietsma, J.: Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel. Mater. Charact. 59(12), 1758 (2008).Google Scholar
Chatterjee, S., Wang, H.S., Yang, J.R., and Bhadeshia, H.K.D.H.: Mechanical stabilisation of austenite. Mater. Sci. Technol. 22(6), 641 (2006).CrossRefGoogle Scholar
Lee, C.G., Kim, S.J., Lee, T.H., and Lee, S.: Effects of volume fraction and stability of retained austenite on formability in a 0.1 C–1.5 Si–1.5 Mn–0.5 Cu TRIP-aided cold-rolled steel sheet. Mater. Sci. Eng., A 371(1), 16 (2004).Google Scholar
Zhang, K., Zhang, M., Guo, Z., Chen, N., and Rong, Y.: A new effect of retained austenite on ductility enhancement in high-strength quenching–partitioning–tempering martensitic steel. Mater. Sci. Eng., A 528(29), 8486 (2011).Google Scholar
Edmonds, D.V., He, K., Miller, M.K., Rizzo, F.C., Clarke, A.J., Matlock, D.K., and Speer, J.G.: Microstructural features of 'quenching and partitioning': A new martensitic steel heat treatment. Mater. Sci. Forum 539, 4819 (2007).Google Scholar
Evans, A.G., Hutchinson, J.W., and McMeeking, R.M.: Stress–strain behavior of metal matrix composites with discontinuous reinforcements. Scr. Metall. Mater. 25(1), 3 (1991).Google Scholar
Bao, G., Hutchinson, J.W., and McMeeking, R.M.: The flow stress of dual-phase, non-hardening solids. Mech. Mater. 12(2), 85 (1991).Google Scholar