Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-18T16:59:25.335Z Has data issue: false hasContentIssue false
  • English
  • Français

Grain size effects on NiTi shape memory alloy fatigue crack growth

Published online by Cambridge University Press:  04 December 2017

William S. LePage Open the ORCID record for William S. LePage [Opens in a new window] ,
Aslan Ahadi ,
William C. Lenthe ,
Qing-Ping Sun ,
Tresa M. Pollock ,
John A. Shaw  and
Samantha H. Daly
William S. LePage
Affiliation:
Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA
Aslan Ahadi
Affiliation:
International Center for Young Scientists, National Institute for Materials Science (NIMS), Tsukuba, Ibaraki 305-0047, Japan
William C. Lenthe
Affiliation:
Materials Science and Engineering, University of California, Santa Barbara, California 93106, USA
Qing-Ping Sun
Affiliation:
Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong
Tresa M. Pollock
Affiliation:
Materials Science and Engineering, University of California, Santa Barbara, California 93106, USA
John A. Shaw
Affiliation:
Department of Aerospace Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA
Samantha H. Daly*
Affiliation:
Department of Mechanical Engineering, University of California, Santa Barbara, California 93106, USA
*
a) Address all correspondence to this author. e-mail: samdaly@engineering.ucsb.edu
Get access

Abstract

Fatigue cracking in polycrystalline NiTi was investigated using a multiscale experimental framework for average grain sizes (GS) from 10 to 1500 nm for the first time. Macroscopic fatigue crack growth rates, measured by optical digital image correlation, were connected to microscopic crack opening and closing displacements, measured by scanning electron microscope DIC (SEM-DIC) using a high-precision external SEM scan controller. Among all grain sizes, the 1500 nm GS sample exhibited the slowest crack growth rate at the macroscale, and the largest crack opening level (stress intensity at first crack opening) and minimum crack opening displacements at the microscale. Smaller GS samples (10, 18, 42, and 80 nm) exhibited nonmonotonic trends in their fatigue performance, yet the correlation was strong between macroscale and microscale behaviors for each GS. The samples that exhibited the fastest crack growth rates (42 and 80 nm GS) showed a small crack opening level and the largest crack opening displacements. The irregular trends in fatigue performance across the nanocrystalline GS samples were consistent with nonmonotonic values in the elastic modulus reported previously, both of which may be related to the presence of residual martensite only evident in the small GS samples (10 and 18 nm).

Keywords

fatiguenanostructurescanning electron microscopy (SEM)
Type
Invited Feature Paper
Information
Journal of Materials Research , Volume 33 , Issue 2 , 29 January 2018 , pp. 91 - 107
Check for updates
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Contributing Editor: Jürgen Eckert

This paper has been selected as an Invited Feature Paper.

References

REFERENCES

Robertson, S.W., Pelton, A.R., and Ritchie, R.O.: Mechanical fatigue and fracture of Nitinol. Int. Mater. Rev. 57, 1 (2012).CrossRefGoogle Scholar
Robertson, S.W. and Ritchie, R.O.: In vitro fatigue-crack growth and fracture toughness behavior of thin-walled superelastic nitinol tube for endovascular stents: A basis for defining the effect of crack-like defects. Biomaterials 28, 700 (2007).Google Scholar
Paris, P.C., Gomez, M.P., and Anderson, W.E.: A rational analytic theory of fatigue. Trend Eng. 13, 9 (1961).Google Scholar
Elber, W.: Fatigue crack closure under cyclic tension. Eng. Fract. Mech. 2, 37 (1970).Google Scholar
Sehitoglu, H.: Crack opening and closure in fatigue. Eng. Fract. Mech. 21, 329 (1985).Google Scholar
Sun, Q., Aslan, A., Li, M., and Chen, M.: Effects of grain size on phase transition behavior of nanocrystalline shape memory alloys. Sci. China: Technol. Sci. 57, 671 (2014).CrossRefGoogle Scholar
Waitz, T., Tsuchiya, K., Antretter, T., and Fischer, F.D.: Phase transformations of nanocrystalline martensitic materials. MRS Bull. 34, 814 (2009).CrossRefGoogle Scholar
Duerig, T., Pelton, A., and Stöckel, D.: An overview of nitinol medical applications. Mater. Sci. Eng., A 275, 149 (1999).Google Scholar
Shaw, J.A. and Kyriakides, S.: Thermomechanical aspects of NiTi. J. Mech. Phys. Solids 43, 1243 (1995).CrossRefGoogle Scholar
Shaw, J.A. and Kyriakides, S.: On the nucleation and propagation of phase transformation fronts in a NiTi alloy. Acta Mater. 45, 683 (1997).Google Scholar
Li, Z.Q. and Sun, Q.P.: The initiation and growth of macroscopic martensite band in nano-grained NiTi microtube under tension. Int. J. Plast. 18, 1481 (2002).Google Scholar
Chang, B-C., Shaw, J.A., and Iadicola, M.A.: Thermodynamics of shape memory alloy wire: Modeling, experiments, and application. Continuum Mech. Thermodyn. 18, 83 (2006).CrossRefGoogle Scholar
Li, M.P. and Sun, Q.P.: Nanoscale phase transition behavior of shape memory alloys — closed form solution of 1D effective modelling. J. Mech. Phys. Solids 110, 21–37 (2018).Google Scholar
Ahadi, A. and Sun, Q.: Stress-induced nanoscale phase transition in superelastic NiTi by in situ X-ray diffraction. Acta Mater. 90, 272 (2015).Google Scholar
Petersmann, M., Pranger, W., Waitz, T., and Antretter, T.: An energy approach to determine the martensite morphology in nanocrystalline NiTi. Adv. Eng. Mater. 19, 1600684 (2017).Google Scholar
Ahadi, A. and Sun, Q.: Grain size dependence of fracture toughness and crack-growth resistance of superelastic NiTi. Scr. Mater. 113, 171 (2016).Google Scholar
Yin, H., He, Y., Moumni, Z., and Sun, Q.: Effects of grain size on tensile fatigue life of nanostructured NiTi shape memory alloy. Int. J. Fatigue 88, 166 (2016).CrossRefGoogle Scholar
Leitner, T., Sabirov, I., Pippan, R., and Hohenwarter, A.: The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy. J. Mech. Behav. Biomed. Mater. 71 (2017).Google Scholar
Prokofiev, E., Burow, J., Frenzel, J., Gunderov, D., Eggeler, G., and Valiev, R.: Phase transformations and functional properties of NiTi alloy with ultrafine-grained structure. Mater. Sci. Forum 669, 1059 (2011).Google Scholar
Gall, K., Tyber, J., Wilkesanders, G., Robertson, S.W., Ritchie, R.O., and Maier, H.J.: Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys. Mater. Sci. Eng., A 486, 389 (2008).Google Scholar
ASTM Standard E647: Standard Test Method for Measurement of Fatigue Crack Growth Rates (ASTM International, West Conshohocken, Pennsylvania, 2013); pp. 1–49.Google Scholar
Sutton, M.A., Orteu, J.J., and Schreier, H.W.: Image Correlation for Shape, Motion, and Deformation Measurements: Basic Concepts, Theory, and Applications (Springer, New York, 2009).Google Scholar
McNeill, S.R., Peters, W.H., and Sutton, M.A.: Estimation of stress intensity factor by digital image correlation. Eng. Fract. Mech. 28, 101 (1987).CrossRefGoogle Scholar
Sutton, M.A., Zhao, W., McNeill, S.R., Helm, J.D., Piascik, R.S., and Riddell, W.T.: Local crack closure measurements: Development of a measurement system using computer vision and a far-field microscope. Advances in fatigue crack closure measurement and analysis. J. ASTM Int. 2, 145 (1999).Google Scholar
O’Connor, S., Nowell, D., and Dragnevski, K.: Measurement of fatigue crack deformation on the macro- and micro-scale: Uniform and non-uniform loading. Int. J. Fatigue 89, 66 (2016).CrossRefGoogle Scholar
Sangid, M.D., Pataky, G.J., Sehitoglu, H., Rateick, R.G., Niendorf, T., and Maier, H.J.: Superior fatigue crack growth resistance, irreversibility, and fatigue crack growth-microstructure relationship of nanocrystalline alloys. Acta Mater. 59, 7340 (2011).Google Scholar
de Matos, P.F.P. and Nowell, D.: Experimental and numerical investigation of thickness effects in plasticity-induced fatigue crack closure. Int. J. Fatigue 31, 1795 (2009).Google Scholar
Carroll, J., Efstathiou, C., Lambros, J., Sehitoglu, H., Hauber, B., Spottswood, S., and Chona, R.: Investigation of fatigue crack closure using multiscale image correlation experiments. Eng. Fract. Mech. 76, 2384 (2009).CrossRefGoogle Scholar
Casperson, M.C., Carroll, J.D., Lambros, J., Sehitoglu, H., and Dodds, R.H.: Investigation of thermal effects on fatigue crack closure using multiscale digital image correlation experiments. Int. J. Fatigue 61, 10 (2014).Google Scholar
Carroll, J.D., Abuzaid, W., Lambros, J., and Sehitoglu, H.: High resolution digital image correlation measurements of strain accumulation in fatigue crack growth. Int. J. Fatigue 57, 140 (2013).Google Scholar
Sutton, M.A., Li, N., Garcia, D., Cornille, N., Orteu, J.J., McNeill, S.R., Schreier, H.W., Li, X., and Reynolds, A.P.: Scanning electron microscopy for quantitative small and large deformation measurements, part II: Experimental validation for magnifications from 200 to 10,000. Exp. Mech. 47, 789–804 (2007).CrossRefGoogle Scholar
Sutton, M.A., Li, N., Joy, D.C., Reynolds, A.P., and Li, X.: Scanning electron microscopy for quantitative small and large deformation measurements, part I: SEM imaging at magnifications from 200 to 10,000. Exp. Mech. 47 (2007).Google Scholar
Kammers, A. and Daly, S.: Self-assembled nanoparticle surface patterning for improved digital image correlation in a scanning electron microscope. Exp. Mech. 53, 1333 (2013).Google Scholar
Kammers, A. and Daly, S.: Digital image correlation under scanning electron microscopy: Methodology and validation. Exp. Mech. 53, 1743 (2013).CrossRefGoogle Scholar
LePage, W.S., Daly, S.H., and Shaw, J.A.: Cross polarization for improved digital image correlation. Exp. Mech. 56, 969 (2016).CrossRefGoogle Scholar
ASTM Standard E561: E561 Standard Test Method for KR Curve Determination (ASTM International, West Conshohocken, Pennsylvania, 2016); pp. 1–16.Google Scholar
Ahadi, A. and Sun, Q.: Stress hysteresis and temperature dependence of phase transition stress in nanostructured NiTi. Appl. Phys. Lett. 103, 5 (2013).CrossRefGoogle Scholar
Ahadi, A. and Sun, Q.: Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic NiTi. Acta Mater. 76, 186 (2014).Google Scholar
LePage, W., Shaw, J., and Daly, S.: Optimum paint sequence for speckle patterns in digital image correlation. Exp. Tech. 41, 557 (2017).Google Scholar
Wu, Y., Ojha, A., Patriarca, L., and Sehitoglu, H.: Fatigue crack growth fundamentals in shape memory alloys. Shape Mem. Superelastic. 1, 18 (2015).Google Scholar
Reu, P. and Jones, E.: Distortion of full-field surface displacements from heat waves. In Conference Proceedings of the International Digital Imaging Correlation Society, Sutton, M. and Reu, P.L., eds. (Springer International, Cham, Switzerland, 2016); pp. 1–2.Google Scholar
Hild, F. and Roux, S.: Evaluating Damage with Digital Image Correlation: B. From Physical to Mechanical Damage (Springer, New York, 2015); pp. 1277–1299, ISBN 9781461455899.Google Scholar
Cady, C.M., Liu, C., Rae, P.J., and Lovato, M.L.: Thermal and loading dynamics of energetic materials. In Proceedings of the Society of Experimental Mechanics Annual Conference (Society of Experimental Mechanics, Bethel, Connecticu, 2009).Google Scholar
Liu, C., Cady, C.M., Rae, P.J., and Lovato, M.L.: On the Quantitative Measurement of Fracture Toughness in High Explosive and Mock Materials (Los Alamos National Laboratories, Los Alamos, New Mexico, 2010); pp. 425–434.Google Scholar
Wang, L.W., Li, K., Sanusei, S., Ghorbani, R., Matta, F., and Sutton, M.A.: Advancement of optical methods in experimental mechanics, volume 3. In Conference Proceedings of the Society for Experimental Mechanics Series, Jin, H., Sciammarella, C., Yoshida, S., and Lamberti, L., eds.; Conference Proceedings of the Society for Experimental Mechanics Series, Vol. 3 (Springer International Publishing, Cham, Switzerland, 2014); pp. 289–297, ISBN 978-3-319-00767-0.Google Scholar
Guo, S.M., Sutton, M.A., Li, N., Li, X.D., Wang, L.W., and Rajan, S.: Measurement of local thermal deformations in heterogeneous microstructures via SEM imaging with digital image correlation. Exp. Mech. 57, 41 (2016).Google Scholar
Sutton, M.: Personal Communiciation, 3 May 2017.Google Scholar
Sedlak, P., Frost, M., Kruisova, A., Hivrmanova, K., Heller, L., and Sittner, P.: Simulations of mechanical response of superelastic NiTi helical spring and its relation to fatigue resistance. J. Mater. Eng. Perform. 23, 2591 (2014).CrossRefGoogle Scholar
Ahadi, A., Matsushita, Y., Sawaguchi, T., Schaffer, J., Sun, Q., and Tsuchiya, K.: Origin of zero and negative thermal expansion in severely-deformed NiTi alloy. Acta Mater. 124, 79 (2017).Google Scholar
Li, Y., Li, J.Y., Liu, M., Ren, Y.Y., Chen, F., Yao, G.C., and Mei, Q.S.: Evolution of microstructure and property of NiTi alloy induced by cold rolling. J. Alloys Compd. 653, 156 (2015).Google Scholar
Gupta, M., Alderliesten, R.C., and Benedictus, R.: A review of T-stress and its effects in fracture mechanics. Eng. Fract. Mech. 134, 218 (2015).Google Scholar
Robertson, S.W., Gong, X.Y., and Ritchie, R.O.: Effect of product form and heat treatment on the crystallographic texture of austenitic Nitinol. J. Mater. Sci. 41, 621 (2006).CrossRefGoogle Scholar
Gao, S. and Yi, S.: Experimental study on the anisotropic behavior of textured NiTi pseudoelastic shape memory alloys. Mater. Sci. Eng., A 362, 107 (2003).CrossRefGoogle Scholar
Xia, M., Liu, P., and Sun, Q.: Grain size effects on Young’s modulus and hardness of nanocrystalline NiTi shape memory alloy. Mater. Lett. 211, 352–355 (2018).CrossRefGoogle Scholar
Kim, K. and Daly, S.: Martensite strain memory in the shape memory alloy nickel–titanium under mechanical cycling. Exp. Mech. 51, 641 (2011).Google Scholar
Feng, P. and Sun, Q.P.: Experimental investigation on macroscopic domain formation and evolution in polycrystalline NiTi microtubing under mechanical force. J. Mech. Phys. Solids 54, 1568 (2006).Google Scholar
Daly, S., Ravichandran, G., and Bhattacharya, K.: Stress-induced martensitic phase transformation in thin sheets of Nitinol. Acta Mater. 55, 3593 (2007).Google Scholar
Hallai, J.F. and Kyriakides, S.: Underlying material response for Luders-like instabilities. Int. J. Plast. 47, 1 (2013).CrossRefGoogle Scholar
Suresh, S. and Ritchie, R.O.: Near-Threshold Fatigue Crack Propagation: A Perspective on the Role of Crack Closure (Tech. Rep., Brown Univ., Providence, RI, USA; Div. of Engineering; Lawrence Berkeley Lab., CA, USA, 1983).Google Scholar
Supplementary material: PDF

LePage et al. supplementary material

LePage et al. supplementary material 1

Download LePage et al. supplementary material(PDF)
PDF 13.8 MB