Hostname: page-component-7c8c6479df-7qhmt Total loading time: 0 Render date: 2024-03-28T23:20:31.523Z Has data issue: false hasContentIssue false

Circuit Analog RF-Visual Antireflection Coatings

Published online by Cambridge University Press:  15 March 2011

Nicole L. Abueg
Affiliation:
The Boeing Company, P.O. Box 516, St. Louis, MO 63166, U.S.A.
Thomas Delfeld
Affiliation:
The Boeing Company, P.O. Box 516, St. Louis, MO 63166, U.S.A.
Get access

Abstract

The Boeing Company has developed a unique nanotechnology for antireflective coatings that can perform at near grazing angles (∼80°), in the long wave infrared (LWIR). This technology has been validated through mathematical modeling and the fabrication and testing of small scale components. The coatings were designed to perform best at 10 micron wavelengths, and moderately well over the 8 to 12 micron region. The technology is based upon a circuit analog sheet (capacitive) buried within a dielectric, to produce a reflection that adds out of phase with respect to the face sheet reflection. Since the TE component of the reflection is highest near grazing, the sheet is designed to primarily affect that polarization (low impedance) while leaving the TM wave unaffected (high impedance).

When desired, in order to improve the TM transmission as well as TE, two layers are used at different depths. This dual-layer approach has also been modeled (in closed form), fabricated and tested. Also, explored in this paper, are the impacts of a design that works well azimuthally at grazing angles.

Until recently, the above solution was limited to RF frequencies, but with advances in fabrication it has become possible to fabricate very small nanostructures that operate in LWIR using traditional thin-film vacuum deposition techniques. It is envisioned that eventually such a concept could be used in the visual regime via self assembly.

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kong, J. A., “Electromagnetic Wave Theory” (John Wiley & Sons Inc. 1986) pp. 103 Google Scholar
2. Collin, R. E., “Foundations for Microwave Engineering” (McGraw Hill Inc. 1966) pp. 37, 248 Google Scholar
3. Ramo, Whinnery, and Duzer, Van, “Fields and Waves in Communication Electronics” (John Wiley & Sons Inc. 1965) pp. 351 Google Scholar