Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-24T03:56:57.597Z Has data issue: false hasContentIssue false
  • English
  • Français

Light Scattering Measurements of Surface Roughness in Molecular Beam Epitaxy Growth of GaAs

Published online by Cambridge University Press:  22 February 2011

C. Lavoie ,
M. K. Nissen ,
S. Eisebitt ,
S. R. Johnson ,
J. A. Mackenzie  and
T. Tiedje
C. Lavoie
Affiliation:
Department of Physics, University of British Columbia, Vancouver, BC, V6T IZI
M. K. Nissen
Affiliation:
Department of Physics, University of British Columbia, Vancouver, BC, V6T IZI
S. Eisebitt
Affiliation:
Department of Physics, University of British Columbia, Vancouver, BC, V6T IZI
S. R. Johnson
Affiliation:
Department of Physics, University of British Columbia, Vancouver, BC, V6T IZI
J. A. Mackenzie
Affiliation:
Department of Physics, University of British Columbia, Vancouver, BC, V6T IZI
T. Tiedje
Affiliation:
Also Department of Electrical Engineering, University of British Columbia, Vancouver, BC, V6T IZI
Get access

Abstract

In-situ measurements of diffuse light scattering at λ = 457 nm are reported from the surface of GaAs films during growth by molecular beam epitaxy. Three different scattering angles are measured simultaneously corresponding to spatial frequencies in the surface roughness of q = 0.9, 12, and 17 μm−1. During growth the initial surface roughness caused by the oxide desorption decreases at high spatial frequencies and increases at low spatial frequency. The low spatial frequency roughness corresponding to scattering vectors parallel to [110] increases more rapidly during growth than for scattering parallel to [111].

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 324: Symposium K – Diagnostic Techniques for Semiconductor Materials Processing , 1993 , 119
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Villain, J., J. Phys. I. (France) 1, 19 (1991).Google Scholar
2. Johnson, M. D., Orme, C., Hunt, A. W., Sudijono, J., Sander, L. M., and Orr, B. G., to be published.Google Scholar
3. Epler, J. E. and Schweizer, H. P., Appl. Phys. Lett. 63, 1228 (1993).CrossRefGoogle Scholar
4. Bennett, J. M. and Mattsson, L., Introduction to Surface Roughness and Scattering, (Optical Society of America, Washington, D. C., 1989) and references therein.Google Scholar
5. Lavoie, C., Johnson, S. R., Mackenzie, J. A., Tiedje, T., and Buuren, T. van, J. Vac. Sci. Technol. A 10, 930 (1992).Google Scholar
6. Johnson, S. R., Lavoie, C., Tiedje, T., and Mackenzie, J. A., J. Vac. Sci. Technol. B 11, 1007 (1993).Google Scholar
7. Robbins, D. J., Pidduck, A. J., Pickering, C., Young, I. M. and Glasper, J. L., SPIE 1012, 25 (1988)Google Scholar
8. Celii, F. G., Files-Sesler, L. A., Beam, E. A. III, and Liu, H.-Y., J. Vac. Sci. Technol. A 11, 1796 (1993).Google Scholar
9. Smith, G. W., Pidduck, A. J., Whitehouse, C. R., Glasper, J. L., and Spowart, J., J. Crystal Growth 127, 966 (1993).Google Scholar