Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-20T03:40:30.711Z Has data issue: false hasContentIssue false
  • English
  • Français

Synergy between Chemical Dissolution and Mechanical Abrasion during Chemical Mechanical Polishing of Copper

Published online by Cambridge University Press:  01 February 2011

Wei Che ,
Ashraf Bastawros  and
Abhijit Chandra
Wei Che
Affiliation:
Department of Mechanical Engineering
Ashraf Bastawros
Affiliation:
Department of Mechanical Engineering Department of Aerospace Engineering, Iowa State University, Ames IA 50011-2271, U.S.A.
Abhijit Chandra
Affiliation:
Department of Mechanical Engineering Department of Aerospace Engineering, Iowa State University, Ames IA 50011-2271, U.S.A.
Get access

Abstract

The synergistic roles of chemical dissolution and mechanical abrasion on the material removal mechanism during CMP process are explored. A set of nano-wear experiments are conducted on electro-plated copper surfaces with systematic exposure to active slurries. Initial results of in situ wear test in chemically active slurry showed an increased material removal rate (MRR) relative to a dry wear test. To understand the synergistic effects of chemical dissolution and mechanical abrasion, we have investigated two plausible mechanisms of material removal. Mechanism-I is based on chemical dissolution enhanced mechanical abrasion. A soft layer of chemical products is assumed to be formed on top of the polished surface due to chemical reaction with a rate much faster than the mechanical abrasion rate. It is then followed by a gentle mechanical abrasion of that soft layer. An increase in the MRR of up to 100% is identified based on the etching time and the down force. Mechanism-II is based on mechanical abrasion accelerated chemical etching. In this case, the nano-wear experiments are first performed to generate local variation of the residual stress levels, and then followed by chemical etching to investigate the variation of the wear depth and the evolution of surface topography due to etching. It is found that the residual stress caused by the mechanical wear enhances the chemical etching rate, as manifested by the increase of wear depth. The developed understanding from these experiments can be used in future studies to control the rates of chemical dissolution and mechanical abrasion as well as investigating the various process-induced defects.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 867: Symposium W – Chemical-Mechanical Planarization-Integration, Technology and Reliability , 2005 , W5.8
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Martinez, M. A., Solid State Technol., 26 (1994).Google Scholar
2. Kaufman, F.B., Thompson, D.B., Broadie, R.E., Guthrie, W.L., Pearson, D.J., Small, M.B., Journal of the Electrochemical Society, 138, 3460–3465 (1991).Google Scholar
3. Pourbaix, M., Pergamon, Oxford, (1966).Google Scholar
4. Carpio, R., Farkas, J., Jairath, R., Thin Solid Films, 266, 238–244 (1995).Google Scholar
5. Luo, W., Campbell, D.R., Babu, S.V., Thin Solid Films, 311, 177–182 (1997).Google Scholar
6. Steigerwald, J.M., Murarka, S.P., Gutmann, R.J., Duquette, D.J., Materials Chemistry and Physics, 41, 217 (1995).Google Scholar
7. Weisenberger, L.M., and DurKin, B.J., p167–175, McGraw-Hill (1978).Google Scholar
8. Gignac, L.M., Rodbell, K.P., Cabral, C., Andricacos, P.C., Rice, P.M., Beyers, R.B., Locke, P.S., Klepeis, S.J., Materials Research Society Symposium – Proceedings, 562, 209–214 (1999).Google Scholar
9. Che, W., Ph.D. thesis, Iowa state University (2005).Google Scholar
10. Srolovitz, D.J., Acta Metallurgica, 37, 621–625 (1989).Google Scholar
11. Kim, K.S., Hurtado, J.A., Tan, H., Physical Review Letters, 83, 3872–3875 (1999).Google Scholar
12. Yu, H.H., Suo, Z., Journal of Applied Physics, 87, 1211–1218 (2000).Google Scholar