Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T19:47:49.687Z Has data issue: false hasContentIssue false

X-Ray Microdiffraction for VLSI

Published online by Cambridge University Press:  15 February 2011

P.-C. Wang
Affiliation:
Department of Chemical Engineering, Materials Science and Mining Engineering, Columbia University, New York, NY 10027
G. S. Cargill
Affiliation:
Department of Chemical Engineering, Materials Science and Mining Engineering, Columbia University, New York, NY 10027
I. C. Noyan
Affiliation:
IBM Research, Yorktown Heights, NY 10598
E. G. Liniger
Affiliation:
IBM Research, Yorktown Heights, NY 10598
C.-K. Hu
Affiliation:
IBM Research, Yorktown Heights, NY 10598
K. Y. Lee
Affiliation:
IBM Research, Yorktown Heights, NY 10598
Get access

Abstract

We describe how x-ray microbeam diffraction is being used to measure strain with micronscale spatial resolution. Micron-scale x-ray beams can be obtained using tapered glass capillaries. With the high brightness and broad energy spectrum of synchrotron radiation and the energy dispersive capabilities of commercially available, liquid nitrogen cooled x-ray detectors, spatially resolved strains in a sample can be determined along different directions without having to rotate the sample, in contrast with more conventional methods using monochromatic x-ray diffraction. This is a major advantage in achieving micron-scale spatial resolution. Strain sensitivities on the order of 2×10−4 have been achieved in such measurements. White beam x-ray microdiffraction has been applied for the first time in real-time studies of thermal and electromigration related strain distributions in passivated Al-on-Si conductor lines. Results of measurements on a single 10μm-wide line are described.

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Hinode, K., Asano, I., and Homma, Y., IEEE Trans. Educ. 36, 1050 (1989).Google Scholar
[2] Greenebaum, B., Sauter, A. I., Flinn, A. P., and Nix, W. D., Appl. Phys. Lett. 58, 1845 (1991).Google Scholar
[3] Sanchez, J. E. Jr., Morris, J. W. Jr., and Lloyd, J. R., J. Metals 42, 41 (1990).Google Scholar
[4] Flinn, P. A. and Chiang, C., J. Appl. Phys. 67, 2927 (1990).Google Scholar
[5] Tezaki, A., Mineta, T., Egawa, H., and Noguchi, T., IEEE Int. Reliability Phys. Symp. Proc. (IEEE, New York, 1990), p. 221.Google Scholar
[6] Besser, P. R., Mack, A. Sauter, Fraser, D. B., and Bravman, J. C., J. Electrochem. Soc. 140, 1769 (1993).Google Scholar
[7] Yamamoto, N. and Sakata, S., Jpn. J. Appl. Phys. 28, L2065 (1989).Google Scholar
[8] Dehaven, P. and Goldsmith, C., Mat. Res. Soc. Symp. Proc. 309, 275 (1993).Google Scholar
[9] Hemmert, R. S. and Costa, M., IEEE Int. Reliability Phys. Symp. Proc. (IEEE, New York, 1991), p. 64.Google Scholar
[10] Ma, Q., Chiras, S., Clarke, D. R., and Suo, Z., J. Appl. Phys. 78, 1614 (1995).Google Scholar
[11] Wang, P.-C., IIICargill, G. S. and Noyan, I. C., Mat. Res. Soc. Symp. Proc. 375, 247 (1995).Google Scholar
[12] Wang, P.-C., IIICargill, G. S., Noyan, I. C. and Liniger, E. G., to be published in Mat. Res. Soc. Symp. Proc. 403 (1996).Google Scholar
[13] Noyan, I. C. and Cohen, J. B., Residual Stress, (Springer-Verlag, New York, NY, 1987).Google Scholar
[14] Hauk, V. M., Oudelhoven, R. W. M., and Vaessen, G. H. J., Met. Trans. A, 13A, 1239 (1982).Google Scholar
[15] Cullity, B. D., Elements of X-ray Diffraction, 2nd ed. (Addison-Wesley Publishing Company, Reading, MA, 1978), Table 23.Google Scholar
[16] Niwa, H., Yagi, H., Tsuchikawa, H., and Kato, M., J. Appl. Phys. 68, 328 (1990).Google Scholar
[17] Korhonen, M. A., Black, R. D. and Li, C.-Y., J. Appl. Phys. 69, 1748 (1991).Google Scholar
[18] For Al single crystals, Young's moduli for [ 111] and [ 100] directions are 76. 1GPa and 63.7GPa, respectively [ 19]. For simplicity, the Voigt average [13] value of 71GPa was used to calculate the in-plane stress σ//.Google Scholar
[19] Hertzberg, R. W., Deformation and Fracture Mechanics of Engineering Materials, 4th ed. (John Wiley & Sons, NY, 1996), Table 14.Google Scholar
[20] Durand, N., Badawi, K. F., and Goudeau, Ph., to be published in Thin Solid Films.Google Scholar
[21] Noyan, I. C., (private communication).Google Scholar
[22] Moske, M. A., Ho, P. S., Mikalsen, D. J., Cuomo, J. J., and Rosenberg, R., J. Appl. Phys. 74, 1716 (1993).Google Scholar
[23] Hu, C.-K., Rodbell, K. P., Sullivan, T. D., Lee, K. Y., and Bouldin, D. P., IBM J. Res. Develop. 39, 465 (1995).Google Scholar