Hostname: page-component-8448b6f56d-c47g7 Total loading time: 0 Render date: 2024-04-23T06:12:09.506Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Interfaces in SiC Particulate-Reinforced Al Alloys by AEM

Published online by Cambridge University Press:  21 February 2011

Brian W. Robertson ,
Chandra Holm ,
Yang-Pi Lin ,
Stephen F. J. Corbin  and
David S. Wilkinson
Brian W. Robertson
Affiliation:
McMaster University, Department of Materials Science and Engineering, 1280 Main St W, Hamilton, Ontario, Canada, L8S 4L7.
Chandra Holm
Affiliation:
Martinsbergstrasse 49, CH 5400 Baden, Switzerland.
Yang-Pi Lin
Affiliation:
McMaster University, Department of Materials Science and Engineering, 1280 Main St W, Hamilton, Ontario, Canada, L8S 4L7.
Stephen F. J. Corbin
Affiliation:
McMaster University, Department of Materials Science and Engineering, 1280 Main St W, Hamilton, Ontario, Canada, L8S 4L7.
David S. Wilkinson
Affiliation:
McMaster University, Department of Materials Science and Engineering, 1280 Main St W, Hamilton, Ontario, Canada, L8S 4L7.
Get access

Abstract

As a preliminary step to detailed study of the interfaces in SiC particulatereinforced Al alloys, a number of methods of sample preparation have been explored; the resultant artefacts on the thinned foils observed in transmission electron microscopes are discussed and improvements to the preparation procedures are suggested. Initial observations of the microstructure of two alloys differing significantly in their matrix silicon content are presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 170: Symposium N – Interfaces in Composites , 1989 , 105
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Corbin, S.F. and Wilkinson, D.S., in Proceedings of the International Symposium on Processing of Ceramic and Metal Matrix Comoosites, edited by H. Mostaghaci (Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy L7, Pergamon Press, New York, 1989) pp. 401–411.Google Scholar
2. Dignard-Bailey, L.M., Malis, T.F., Boyd, J.D. and Embury, J.D., in Proceedings of the International Symposium on Advanced Structural Materials, edited by D.S. Wilkinson (Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy 9, Pergamon Press, New York, 1989) pp. 87–95.Google Scholar
3. Kestel, B.J., Ultramicroscopy 19, 205 (1986).Google Scholar
4. Aluminum: Properties and Physical Metallurgy, edited by Hatch, J.E. (American Society for Metals, Metals Park, Ohio, 1984).Google Scholar