Hostname: page-component-7c8c6479df-94d59 Total loading time: 0 Render date: 2024-03-28T13:04:16.139Z Has data issue: false hasContentIssue false

Cantilever Beam Stress Measurements During Ion Irradiation

Published online by Cambridge University Press:  21 February 2011

A. I. Van Sambeek
Affiliation:
University of Illinois at Urbana-Champaign, Dept. of Materials Science and Engineering, Urbana, IL 61801
R.S. Averback
Affiliation:
University of Illinois at Urbana-Champaign, Dept. of Materials Science and Engineering, Urbana, IL 61801
Get access

Abstract

In-situ stress measurements on single crystal MgO and A1203 have been performed during ion irradiation. A cantilevered beam sample arrangement was used, with the stress in the implanted layer determined from the deflection of the sample as measured by the change in capacitance between the free end of the sample and a reference electrode. Point defect concentrations are obtained by dividing the volume strain by the defect relaxation volume, with saturation values of 0.8 to 1.2% obtained for 1.0 MeV Ne, Ar and Kr irradiations. Defect production is sublinear with dose, with an efficiency of less than 25% compared to Kinchin-Pease predictions. Ionization induced annealing is evaluated with 1.0 MeV He and 1.0 MeV H irradiations following heavy ion irradiation.

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Stoney, G.G., Proc. R. Soc. (London), A 32, p. 172, (1909).Google Scholar
2 Brennerand, A. and Senderoff, S., J. Res. Nat. Bur. Stan., 42, p. 105, (1949).Google Scholar
3 Gardner, D.S. and Flinn, P.A., J. App. Phys., 67, p. 1831,(1990).Google Scholar
4 Ehrhart, P., Mat. Soc. Proc., Vol. 41, p. 13, (1985).Google Scholar
5 Chopra, K.L., Thin Film Phenomena. McGraw-Hill, New York, (1969).Google Scholar
6 Nix, W.D., Met. Trans. A, 20A, p. 2217, (1989).Google Scholar
7 EerNisse, E.P., App. Phys. Let., 18, p. 581, (1971).Google Scholar
8 Volkert, C.A., J. App. Phys., 70, p. 3521, (1991).Google Scholar
9 Arnold, G.W., Krefft, G.B. and Norris, C.B., App. Phys. Let., 25, p. 540, (1974).Google Scholar
10 Krefft, G.B., Beezhold, W. and EerNisse, E.P., IEEE Trans. Nucl. Sci., N5–22, p.2247, (1975)Google Scholar
11 EerNisse, E.P., J. Appl. Phys., 45, p. 167, (1974).Google Scholar
12 Norris, C.B. and EerNisse, E.P., J. Appl. Phys., 45, p. 3876, (1974).Google Scholar
13 Krefft, G.B., J. Vac. Sci. Tech., 14, p. 533, (1977).Google Scholar
14 Ziegler, J.F., Biersack, J.P. and Littmark, U., The Stopping and Range of Ions In Solids. Pergamon, New York, (1985).Google Scholar
15 Sangster, M.J.L. and Rowell, D.K., Phil. Mag. A, 44, p. 613, (1981).Google Scholar
16 Averback, R.S., Ehrhart, P., Popov, A.I. and Van Sambeek, A., Rad. Eff. & Def. Sol., 133/134, (1995).Google Scholar
17 Evans, B.D., Comas, J., Malmberg, P.R., Phys. Rev. B, 6, p. 2453, (1972).Google Scholar