Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-23T15:13:43.869Z Has data issue: false hasContentIssue false

Investigation on the effects of resistive loading on wrapped bow-tie antennas

Published online by Cambridge University Press:  10 January 2019

Doojin Lee*
Affiliation:
Mechanical and Mechatronics Engineering, University of Waterloo (UW), Waterloo, Ontario (ON), Canada
George Shaker
Affiliation:
Mechanical and Mechatronics Engineering, University of Waterloo (UW), Waterloo, Ontario (ON), Canada
William Melek
Affiliation:
Mechanical and Mechatronics Engineering, University of Waterloo (UW), Waterloo, Ontario (ON), Canada
*
Author for correspondence: Doojin Lee, E-mail: doojin.lee@uwaterloo.ca

Abstract

The pulse radiating characteristic of a wrapped bow-tie antenna (WBA) and wrapped resistively loaded bow-tie antenna (WRLBA) is presented for impulse radar applications in this paper. The numerical analysis of the WRLBA is performed by comparing that of the WBA. The wrapped antennas are realized on a flexible substrate. The antennas are fed by an impedance tapered balun, which has an overall transmission loss of −1.4 dB over the balun length. The characteristics of the resistive loading to the wrapped antenna, such as reflection coefficient, reflected pulse in the time domain, voltage standing wave ratio, and input impedance, are experimentally investigated and compared with simulated results. The fidelity factor of the radiated electric field on the boresight direction for the WBA and WRLBA is calculated as 0.82 and 0.96, respectively. The wireless communication ability is evaluated by the transmission coefficient, group delay, boresight gain, and received waveform. The calculated fidelity factor of the received waveform for the WBA and WRLBA is 0.79 and 0.85, respectively. The average and variations of the group delay of both wrapped antennas are observed to be around 2.5 ns and less than 1.5 ns, respectively.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Federal Communications Commission (2002) Federal Communications Commission Revision of Part 15 of The Commission's Rules Regarding Ultra-Wideband Transmission System from 3.1 to 10.6 GHz, Washington, DC, USA.Google Scholar
2.Spiliotopoulos, CG and Kanatas, AG (2009) Path-loss and time-dispersion parameters of UWB signals in a military airplane. IEEE Antennas and Wireless Propagation Letters 8, 790793.Google Scholar
3.Ahmadian, Z, Lampe, L and Mietzner, J (2014) Multiuser two-way relaying schemes for UWB communication. IEEE Transactions on Wireless Communications 13, 63826396.Google Scholar
4.Lee, H, Lee, S, Yoon, W and Han, S (2014) Power controlled FM-UWB system with a wideband RF carrier for body area network applications. International Journal of Microwave and Wireless Technologies 6, 537541.Google Scholar
5.Biswal, S and Das, S (2018) A compact dual port UWB-MIMO/diversity antenna for indoor application. International Journal of Microwave and Wireless Technologies 10, 360367.Google Scholar
6.Négrier, R, Lalande, M, Bertrand, V, Andrieu, J, Couderc, V, Shalaby, B and Desrumaux, L (2016) UWB impulse radiation source with integrated optoelectronic generator. International Journal of Microwave and Wireless Technologies 8, 795805.Google Scholar
7.Turk, A, Ozkan-Bakbak, P, Durak-Ata, L, Orhan, M and Unal, M (2016) High-resolution signal processing techniques for through-the-wall imaging radar systems. International Journal of Microwave and Wireless Technologies 8, 855863.Google Scholar
8.Schires, E, Georgiou, P and Lande, TS (2018) Vital sign monitoring through the back using an UWB impulse radar with body coupled antennas. IEEE Transactions on Biomedical Circuits and Systems 12, 292302.Google Scholar
9.Zheng, S, Pan, X, Zhang, A, Jiang, Y and Wang, W (2015) Estimation of echo amplitude and time delay for OFDM-based ground-penetrating radar. IEEE Geoscience and Remote Sensing Letters 12, 23842388.Google Scholar
10.Sharif, A, Chattha, HT, Aftab, N, Saleem, R and ur Rehman, S (2015) A tree shaped monopole antenna for GPR applications. 2015 International Symposium on Antennas and Propagation (ISAP), Hobart, TAS. pp. 13.Google Scholar
11.Turk, AS (2006) Ultra-wideband Vivaldi antenna design for multisensor adaptive ground-penetrating impulse radar. Microwave and Optical Technology Letters 48, 834839.Google Scholar
12.Ren, L, Koo, YS, Wang, H, Wang, Y, Liu, Q and Fathy, AE (2015) Noncontact multiple heartbeats detection and subject localization using UWB impulse Doppler radar. IEEE Microwave and Wireless Components Letters 25, 690692.Google Scholar
13.Lee, D, Velander, J, Blokhuis, TJ, Kim, K and Augustine, R (2016) Preliminary study on monitoring the progression of osteoporosis using UWB radar technique in distal femur model. Electronics Letters 52, 589590.Google Scholar
14.Lee, D (2019) Investigation of the Pulse Radiating Performance of Resistively Loaded Dipole Antennas by Manipulation of the Loading Parameter. International Journal of Electronics and Communications 98, 248258.Google Scholar
15.Lee, D, Nowinski, D and Augustine, R (2018) A UWB sensor based on resistively-loaded dipole antenna for skull healing on cranial surgery phantom models. Microwave and Optical Technology Letters 60, 897905.Google Scholar
16.Engin, E, Çiftçioğlu, B, Özcan, M and Tekin, İ (2007) High resolution ultrawideband wall penetrating radar. Microwave and Optical Technology Letters 49, 320325.Google Scholar
17.Bektas, HO, Ozdemir, O, Orhan, M and Turk, AS (2016) An experimental investigation of F-K migration and SAR algorithm using beam space MUSIC for UWB through-the-wall imaging. 2016 IEEE Radar Methods and Systems Workshop (RMSW), Kiev. pp. 7075.Google Scholar
18.Maloney, JG and Smith, GS (1993) A study of transient radiation from the Wu-King resistive monopole-FDTD analysis and experimental measurements. IEEE Transactions on Antennas and Propagation 41, 668676.Google Scholar
19.Montoya, TP and Smith, GS (1996) A study of pulse radiation from several broad-band loaded monopoles. IEEE Transactions on Antennas and Propagation 44, 11721182.Google Scholar
20.Wu, T and King, R (1965) The cylindrical antenna with nonreflecting resistive loading. IEEE Transactions on Antennas and Propagation 13, 369373.Google Scholar
21.Montoya, TP and Smith, GS (1995) A comparison of several broadband loaded monopoles for pulse radiation. IEEE Antennas and Propagation Society International Symposium. Digest, Newport Beach, CA, USA. Vol. 1, pp. 198201.Google Scholar
22.Shlager, KL, Smith, GS and Maloney, JG (1996) TEM horn antenna for pulse radiation: an improved design. Microwave and Optical Technology Letters 12, 8690.Google Scholar
23.Maloney, JG and Smith, GS (1992) Optimization of pulse radiation from a simple antenna using resistive loading. Microwave and Optical Technology Letters 5, 299303.Google Scholar
24.Maloney, JG and Smith, GS (1993) Optimization of a conical antenna for pulse radiation: an efficient design using resistive loading. IEEE Transactions on Antennas and Propagation 41, 940947.Google Scholar
25.Shlager, KL, Smith, GS and Maloney, JG (1994) Optimization of bow-tie antennas for pulse radiation. IEEE Transactions on Antennas and Propagation 42, 975982.Google Scholar
26.Lestari, AA, Bharata, E, Suksmono, AB, Kurniawan, A, Yarovoy, AG and Ligthart, LP (2010) A modified bow-tie antenna for improved pulse radiation. IEEE Transactions on Antennas and Propagation 58, 21842192.Google Scholar
27.Kangwook, K and Scott, WR (2004) Improved resistively-loaded vee dipole for ground-penetrating radar applications. IEEE Antennas and Propagation Society Symposium 3, 25482551.Google Scholar
28.Lestari, AA, Yarovoy, AG and Ligthart, LP (2004) RC-loaded bow-tie antenna for improved pulse radiation. IEEE Transactions on Antennas and Propagation 52, 25552563.Google Scholar
29.Zhang, F, Fang, GY, Ji, YC, Ju, HJ and Shao, JJ (2011) A novel compact double exponentially tapered slot Antenna (DETSA) for GPR applications. IEEE Antennas and Wireless Propagation Letters 10, 195198.Google Scholar
30.Deng, C and Xie, YJ (2009) Design of resistive loading Vivaldi antenna. IEEE Antennas and Wireless Propagation Letters 8, 240243.Google Scholar
31.EM software and Systems FEKO, available online at http://www.feko.info.Google Scholar
32.Amert, T, Wolf, J, Albers, L, Palecek, D, Thompson, S, Askildsen, B and Whites, KW (2004) Economical resistive tapering of bowtie antennas. IEEE Antennas and Propagation Society Symposium 2, 17721775.Google Scholar
33.Hojjatollah, F and Zahra, A (2015) Bandwidth enhancement of a CPW-fed monopole antenna with small fractal elements. AEU – International Journal of Electronics and Communications 69, 590595.Google Scholar
34.Ansoft HFSS, available online at http://www.ansoft.com/prouct/hf/hfss.Google Scholar
35.Venkatesan, J and Scott, WR Jr (2006) Measured patterns of a resistive V-dipole fed with a double-Y balun. Microwave and Optical Technology Letters 48, 380383.Google Scholar
36.Pozar, DM (2005) Microwave engineering, 3rd edn. New York, NY, USA: Wiley.Google Scholar
37.Lee, D, Melek, W and Shaker, G (in press) Investigation of wrapped effects on bow-tie antenna with and without resistive loading for pulsed radar applications. Electronics Letters 55, 78.Google Scholar
38.Qing, X, Chen, ZN and Chia, MYW (2006) Characterization of ultrawideband antennas using transfer functions. Radio Science 41, RS1002.Google Scholar
39.Duroc, Y, Ghiotto, A, Vuong, TP and Tedjini, S (2007) UWB antennas: systems with transfer function and impulse response. IEEE Transactions on Antennas and Propagation 55, 14491451.Google Scholar
40.Nel, M, Joubert, J and Odendaal, JW (2014) The measurement of complex antenna transfer functions for ultra-wideband antennas in a compact range [Measurements Corner]. IEEE Antennas and Propagation Magazine 56, 163170.Google Scholar