Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-25T17:18:33.259Z Has data issue: false hasContentIssue false
  • English
  • Français

Heat Curing and Delayed Ettringite Formation

Published online by Cambridge University Press:  21 February 2011

M.C. Lewis ,
Karen L. Scrivener  and
S. Kelham
M.C. Lewis
Affiliation:
Imperial College of Science, Technology and Medicine, London, U.K.
Karen L. Scrivener
Affiliation:
Imperial College of Science, Technology and Medicine, London, U.K.
S. Kelham
Affiliation:
Blue Circle Industries PLC, Kent, U.K.
Get access

Abstract

This paper reports some preliminary results from a study of the effect of elevated temperature curing on mortars and the phenomenon of delayed ettringite formation (DEF). Mortars made from cements with sulphate levels of 3%, 4%, and 5% and with 5% sulphate and added alkali were cured at 20 and 90° C and subsequently stored in water. Expansion measurements showed a pessimum effect with increasing S03 content. Mortars which expanded showed a corresponding decrease in strength. X-ray diffraction (XRD) studies indicated that no ettringite is present after heat treatment but re-forms over time within the material. However, the ultimate levels of ettringite reached do not correspond to the magnitude of expansion observed. X-ray microanalysis shows that immediately after the heat treatment the aluminate species and most of the sulphate species are incorporated within the C-S-H gel. The concentrations of these species decrease during expansion, such that at the end of expansion the amounts remaining correspond to the presence of AFm phase mixed with C-S-H.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 370: Symposia Va/Vb – Microstructure of Cement-Based Systems/Bonding and Interfaces in Cement... , 1994 , 67
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sylla, H-M., Beton 38, 449 (1988).Google Scholar
2. Heinz, D. and Ludwig, U., , Katharine and Mather, Bryant International Conference, ACI, Detroit, SP 100–105 (1987)Google Scholar
3. Neck, U., Beton 38, 488 (1988).Google Scholar
4. Odler, I., Abdul-Maula, S. and Z.-Y, in Microstructural Development During Hydration of Cement, (Mater. Res. Soc. Symp. Proc. 60, 1987) pp. 139.Google Scholar
5. Lawrence, C.D., draft papaer, 1993.Google Scholar
6. Heinz, D., Ludwig, U. and Rudiger, I., Concrete Precasting Plant Technology 11, 56 (1989).Google Scholar
7. Johansen, V., Thaulow, N., Jakobsen, U.H. and Palbøl, L., RH&H Bulletin No. 47, (1993).Google Scholar
8. Scrivener, K.L. and Taylor, H.F.W., Adv. Cem. Res. 5, 139 (1993).Google Scholar