Hostname: page-component-7c8c6479df-ph5wq Total loading time: 0 Render date: 2024-03-28T18:54:17.630Z Has data issue: false hasContentIssue false

Effects of high temperature after anthesis on starch granules in grains of wheat (Triticum aestivum L.)

Published online by Cambridge University Press:  08 December 2010

P. LIU
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
W. GUO*
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
Z. JIANG
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
H. PU
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
C. FENG
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
X. ZHU
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
Y. PENG
Affiliation:
Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology/Wheat Research Institute, Yangzhou University, Yangzhou 225009, Jiangsu, China
A. KUANG
Affiliation:
Department of Biology, The University of Texas-Pan American, Edinburg, TX 78539, USA
C. R. LITTLE
Affiliation:
Department of Plant Pathology, Kansas State University, Manhattan, KS 66506, USA
*
*To whom all correspondence should be addressed. Email: guows@yzu.edu.cn
Rights & Permissions [Opens in a new window]

Summary

The effect of high temperatures (above 25°C) on starch concentration and the morphology of starch granules in the grains of wheat (Triticum aestivum L.) were studied. Wheat plants of cultivars Yangmai 9 (weak-gluten) and Yangmai 12 (medium-gluten) were treated with high temperatures for 3 days at different times after anthesis. The results showed that the starch concentration of grains given a heat-shock treatment above 30°C were lower than those developing at normal temperature in both cultivars. High temperature lowered starch concentration due to the decrease of amylopectin. Under the same temperature, the effect of heat shock from 6 to 8 days after anthesis (DAA) was the greatest, whereas from 36 to 38 DAA the effect was the least. The effects of high temperatures after anthesis on starch-pasting properties were similar to those on starch concentration, especially after 35–40°C treatments. The size, shape and structure of starch granules in wheat grains (determined by electron microscopy) after heat shock were visibly different from the control. When given heat shock during development, the starch granules in mature wheat grains were ellipsoid in shape and bound loosely with a protein sheath in Yangmai 9, while they were damaged and compressed with fissures in Yangmai 12, indicating the differences in resistance to high temperature between cultivars. Ratios of large (type-A) and small (type-B) starch granules significantly decreased under heat shock, which limited the potential sink size for dry matter deposition in the grain.

Type
Climate Change and Agriculture
Copyright
Copyright © Cambridge University Press 2010. The online version of this article is published within an Open Access environment subject to the conditions of the Creative Commons Attribution-NonCommercial-ShareAlike licence <http://creativecommons.org/licenses/by-nc-sa/2.5/>. The written permission of Cambridge University Press must be obtained for commercial re-use.

INTRODUCTION

Wheat grain yield and quality are affected by many different environmental factors. Among these, temperature is a major component in environmental variation and has a marked effect on grain filling for wheat. Heat stress reduces the grain weight through a reduction in grain growth duration and grain growth rate (Viswanathan & Khanna-Chopra Reference Viswanathan and Khanna-Chopra2001). High temperatures hasten the decline in photosynthesis, reduce leaf area and decrease shoot and grain mass as well as the weight and sugar content of kernels (Shah & Paulsen Reference Shah and Paulsen2003). The rate of cell enlargement and the rate of accumulation of nitrogen (N) in the grains are relatively unresponsive to higher temperatures (Jenner Reference Jenner1994). Within the grains, Feng et al. (Reference Feng, Guo, Shi, Peng and Zhu2000) found that the endosperm cell proliferation rate was increased for a short period after exposure to high temperature, but the duration of cell proliferation was significantly shortened, which resulted in a decreased maximum endosperm cell number and a decline of grain weight. In addition, the grain nitrogen content at maturity increases under heat shock. Viswanathan & Khanna–Chopra (Reference Viswanathan and Khanna-Chopra2001) found that gliadin synthesis increased and glutenin synthesis decreased. Protein synthesis was less heat sensitive than starch accumulation (Bhullar & Jenner Reference Bhullar and Jenner1985).

Wheat endosperm contains two types of starch granules: type-A (large granules) and type-B (small granules) (Chiotelli & Le Meste Reference Chiotelli and Le Meste2002). Environments where temperatures rise above 30°C during the first 14 days after anthesis (DAA) produce grains with a high proportion of type-A starch granules (Panozzo & Eagles Reference Panozzo and Eagles1998). The proportion of amylose in the total starch content also increases with temperatures above 30°C during the first 14 days, but is not influenced by temperature to the same extent as granule type (Panozzo & Eagles Reference Panozzo and Eagles1998). However, little is known about the effects of high temperature at different levels during the grain-filling period on starch concentration and traits. The objective of the present study was to assess the effects of different high-temperature treatments at different stages of grain filling on the starch concentration and traits in Yangmai 9 and Yangmai 12, two widely grown wheat cultivars in China with contrasting gluten properties. Such information will aid understanding how heat affects starch concentration and traits, and provide a valuable reference for improving wheat grain yield under high-temperature stress.

MATERIALS AND METHODS

Field traits

The experiment was carried out in the agricultural experimental field at the Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology (119°26′E, 32°24′N, 7 m asl) of the Yangzhou University from 2003 to 2005. The wheat (Triticum aestivum L.) cultivars used in the study were Yangmai 9 (weak-gluten) and Yangmai 12 (medium-gluten). Seeds were obtained from the Wheat Research Institute, Yangzhou University, China. The wheat plants were grown in pots (diameter at the top was 0·3 m and at the bottom was 0·2 m, height 0·27 m) filled with 11 kg loam soil with nitrogenous P2O5 and K2O fertilizer (3·52 g N/pot; 1·32 g P2O5/pot; 1·32 g K2O/pot). Twelve seeds each of Yangmai 9 and Yangmai 12 were sown on 28 October 2003 and 30 October 2004. Plants were thinned to six plants per pot on 30 November 2003 and 3 December 2004. Four pots were used for each treatment and the wheat plants kept in each pot were morphologically uniform. The pots were irrigated when the soil surface appeared dry until mid-April, and then each day thereafter. Both cultivars reached 0·5 anthesis on the same date in both years: 18 April in 2004 and 21 April in 2005.

Treatment levels

Four temperature treatment levels (i.e. daily average temperature) of 25, 30, 35 and 40°C (±0·5°C) were set in a phytotron glasshouse. The relative air humidity was set at 0·5 (±0·01), the photosynthetic photon flux density was 800 μmol/m2/s and the length of photoperiod averaged 12 h. During grain-filling periods, pots with wheat plants were transferred to four temperature-controlled phytotron glasshouses, with the four temperature treatment levels, where they remained for 3 days. Wheat plants were treated with high temperatures on selected DAA (2003/04 experiment: 15–17, 19–21, 25–27 and 33–35 DAA; 2004/05 experiment: 1–3, 6–8, 13–15, 19–21, 25–27, 33–35 and 36–38). After high-temperature treatment, the pots were transferred back to the natural environment (average daily temperature 15–28°C) outside the phytotron glasshouse. Plants in pots growing under the natural environment, untreated with high temperature, were the controls. The date at which grains attained maximum dry weight was recorded as the date of maturity for the crop. Mature spikes from all plants were hand harvested.

Starch concentration

Wheat flour was produced from 10 g grains from each treatment. Grains were milled on a Brabender Quadraplex experimental mill, and bran and endosperm were separated by sifting the samples on a strand shaker using a brass standard sieve no. 70. The flour was used for determining starch concentration and pasting characteristics.

The starch concentration of wheat grains was determined based on the double-wavelength method by UV-visible spectrophotometry (Perkin Elmer Lambda 15, Veberlingen, Germany) (He Reference He1985). For each sample, wheat flour (100 mg) was placed in a test tube, to which 10 ml of freshly prepared potassium hydroxide (KOH; 5 m) was added. The tube was heated and mixed for 10 min in a water bath at 100°C and adjusted to a final volume of 50 ml with sterile distilled water (sdH2O). A 2·5 ml aliquot of this fraction was mixed with 20 μl of sdH2O in two bottles, in which the pH value was adjusted to 3·5 by addition of 1 m hydrochloric acid (HCl). Thereafter, 0·5 ml of a freshly prepared iodine–potassium iodide (I2–KI) solution (2 g I2/l+20 g KI/l) was added to one of the bottles for colour reaction and the volumes were made up to 50 ml. After 20 min the absorbance was measured (490 and 646 nm for amylose and 574 and 750 nm for amylopectin, respectively) using a UV-visible spectrophotometer.

Pasting characteristics

Pasting characteristics of the flour were measured with a rapid visco analyser (RVA) (Newport Scientific Pty. Ltd., Sydney, Australia). Flour (3·5 g, 0·14 moisture) was placed in an aluminium can containing 25 ml distilled water. The flour suspension was stirred constantly while it was heated at 50°C for 1·5 min, then the temperature was increased to 95°C at a constant rate, held at 95°C for 3 min and cooled at a constant rate to 50°C for 5·5 min. The primary flour-pasting characteristics derived from the RVA curve included peak viscosity, minimum viscosity, final viscosity (maximum viscosity during cooling to 50°C), breakdown (peak minus minimum viscosity) and setback (final minus minimum viscosity).

The starch samples were used to determine the size distribution of starch granules and to evaluate the effect of high temperature after anthesis on the volume proportion of different size fractions of starch granules. The low-angle laser light scattering (LALLS) method was used to determine the distribution of starch granule sizes (Analysette 22, Fritsch, Germany). The ratio of starch A-(large) to B (small)-type granules was determined.

Starch granules

Wheat starch granules were examined by environmental scanning electron microscopy (ESEM). Fifteen fresh wheat grains were randomly collected from each treatment and soaked in a fixative containing 2·5%(v/v) glutaraldehyde in 0·1 m phosphate buffer (pH 7·2) overnight at 4–10°C and then dehydrated in a series of acetone. The grains were cut into 2 mm sections. The middle sections were mounted on aluminium stubs and examined in a Philips XL30-ESEM at an accelerating potential of 20 kV.

Temperature treatments for plants were arranged in four replications. Analysis of variance was applied to each data set to assess the effects of the treatments by using SAS (PROC GLM; SAS Institute 1997).

RESULTS

As shown in Tables 1 and 2, plants were premature and the filling duration shortened under heat shock after anthesis in Yangmai 9 (weak-gluten) and Yangmai 12 (medium-gluten). The weight of grains experiencing >25°C was lower than those grown at normal temperature after anthesis (DAA). Grain weight reduced with increasing temperatures. Under the same temperature, the response of grain weight to heat shock from 6 to 8 DAA was the greatest; from 1 to 3 DAA was the second, whereas that from 36 to 38 DAA was the least.

Table 1. Effects of different temperatures on total starch concentration in grains and filling duration in two wheat cultivars during the 2003/04 experiment (d.f.=3)

Table 2. Effects of varied temperature on total starch concentration in grains and filling duration in two wheat cultivars during the 2004/05 experiment (d.f.=3)

As shown in Figs 1 and 2, high-temperature treatment after anthesis curtailed starch concentration in grains of both Yangmai 9 and Yangmai 12. Amylopectin and total starch concentrations of grains experiencing temperatures >30°C were significantly lower than those at normal temperature from 1 to 33 DAA. There was little difference in amylopectin and total starch concentrations between grains exposed to 25, 30 and 35°C and that of the control after 33 DAA, but they decreased significantly when the temperature was higher than 35°C. The decline of starch concentration at high temperatures was mainly due to the reduction of amylopectin. Grain starch concentration was highest in grains experiencing 30°C and lowest in those at 40°C in both Yangmai 9 and Yangmai 12. There were differences in starch concentration responses to heat stress at the different filling stages. Under the same temperature at the early filling stage, the effect of heat shock from 6 to 8 DAA was the greatest, and from 1 to 3 DAA was the second highest. At the middle and late filling stages, the effect of heat shock on starch concentration from 25 to 27 DAA was the greatest, while there was least effect from 36 to 38 DAA. Both cultivars showed the same trends in both years (Figs 1 and 2).

Fig. 1. Average total starch concentration (amylopectin+amylose) (mg/g) of (a) Yangmai 9 and (b) Yangmai 12 wheat exposed to a range of temperatures (25–40°C) at 15–17 to 33–35 DAA and average total starch concentration of wheat exposed to normal outdoor temperatures (dashed line) during the 2003/04 experiment. The total starch and amylopectin concentration in temperature above 30°C are significantly different from that in normal temperature (P<0·05, n=4). Bars represent s.e.m.

Fig. 2. Average total starch concentration (amylopectin+amylose) (mg/g) of (a) Yangmai 9 and (b) Yangmai 12 wheat exposed to a range of temperatures (25–40°C) at 1–3 to 36–38 DAA and the average total starch concentration of wheat exposed to normal outdoor temperatures (dashed line) during the 2004–2005 experiment. The total starch and amylopectin concentration in temperature above 30°C are significantly different from that in normal temperature (P<0·05, n=4). Bars represent s.e.m.

The results showed that the starch-pasting properties of grains experiencing 30°C were similar to those grown at 25°C. The peak viscosity, minimum viscosity, breakdown, final viscosity and setback in the RVA profile of starch were lower with exposure to temperatures over 30°C in both cultivars. At the same temperature, the effect of heat shock on grain starch-pasting characteristics from 6 to 8 DAA was the greatest, while that from 33 to 35 DAA was the least (Fig. 3). The effect of high temperature after anthesis on the RVA profile was also reflected in the tail of the RVA curve. The bend of the tail for the high-temperature treatment was less than that for the low-temperature treatment in the same cultivar. Resistance to high temperature varied with cultivar; Yangmai 9 was stronger than Yangmai 12.

Fig. 3. RVA profile characteristics showing the effect of different temperatures (25–40°C) after anthesis on the pasting characteristics of grains sampled at different grain-filling periods (1–3, 6–8, 13–15, 19–21, 25–27 and 33–35 DAA for Yangmai 9 (left column) and Yangmai 12 (right column) in the 2004/05 experiment. The y-axis represents viscosity and the x-axis represents pasting time.

Starch granules in grains of both heat-shocked cultivars were morphologically different from the granules of the control treatments (Fig. 4) in the 2003/04 experiment. In Yangmai 9, starch granules were only slightly damaged in the 30°C treatment (Fig. 4), but the granules became small and ellipsoid in shape and were bound loosely with a protein sheath in the 40°C treatment, in comparison with the grains from a normal environment (Fig. 4). In Yangmai 12, on the first day after the 30°C heat-shock treatment had ended, the fissures in starch granules were observed, but disappeared at maturity (Fig. 4). However, in the 40°C treatment, starch granules were compressed with fissures that remained at maturity (Fig. 4).

Fig. 4. ESEM micrographs of starch granules showing the effect of temperatures on the morphology of granules from 25 to 27 DAA in Yangmai 9 and Yangmai 12 during the 2003/04 experiment. The column entitled 25–27 represents ESEM micrographs taken one day after treatment. The column entitled Mature represents ESEM micrographs taken at kernel maturity (harvest). Rows represent 30 and 40°C treatments as well as normal, which represent kernels taken from wheat exposed to normal outdoor conditions. Arrows indicate fissures on starch granules. The columns entitled starch granule indicate images that haves been enlarged 3 times of image in the left column in order to accentuate the detailed morphology of starch granule especially fissures. Bars represent 20 μm.

The results from the 2004/05 experiment were similar to those of the previous year. Heat shock at 30°C and below had no visible effect on starch grains, while above 30°C it had a large effect. The starch granules were ellipsoid in shape, and combined loosely with a protein sheath under high temperature in Yangmai 9, in comparison with the grains from the normal environment (Fig. 5). The sizes of starch granules after the 40°C heat shock were smaller than the control and other treatments. At the early filling stage, the effects of heat shock above 30°C on starch granules from 6 to 8 DAA were greatest, showing smaller granules loosely combined with a protein sheath (Fig. 5), and those features were also obvious from 1 to 3 DAA (Fig. 5). At the middle and late grain-filling stages, the effect of heat shock was greatest from 25 to 27 DAA (Fig. 5), showing small granules and loosely combined protein sheaths, while there was less effect from 33 to 35 DAA (Fig. 5).

Fig. 5. ESEM micrographs of starch granules of Yangmai 9 wheat showing the effect of high temperatures on the morphology of granules from different grain-filling periods and harvested at maturity for the 2004/05 experiment. Columns represent 30 and 40°C treatments. Rows represent different grain-filling periods (1–3, 6–8, 25–27 and 33–35 DAA). The panel labelled normal, mature represents kernels taken from Yangmai 9 wheat exposed to normal outdoor conditions. Bars represent 20 μm.

The starch granules in Yangmai 12 had no fissures on the first day after the 30°C heat-shock treatment had ended, of around 1–3, 6–8, 13–15, 19–21 and 33–35 DAA (data not shown) or at maturity, but those after the 40°C treatment were damaged and compressed with fissures (Fig. 6). However, on the first day during heat-shock treatment with 30°C and above, from 25 to 27 DAA, fissures on starch granules were observed.

Fig. 6. ESEM micrographs of starch granules of Yangmai 12 wheat showing the effect of high temperature on the morphology of granules from different grain-filling periods and harvested at maturity for the 2004/05 experiment. Columns represent 30 and 40°C treatments. Rows represent different grain-filling periods (1–3, 6–8 and 25–27 DAA. The panel labelled normal, Mature represents kernels taken from Yangmai 12 wheat exposed to normal outdoor conditions. Arrows indica te fissures on starch granules. Bars represent 20 μm.

The starch granules had a few fissures in the treatment under 30°C, but fissures were frequently observed in the treatment at 40°C. The number of granules with fissures increased with an increase in the duration of high temperatures. On the first day after the 30°C heat-shock treatment had ended, fissures were observed on granules, but these disappeared on the fifth day after treatment (Fig. 6). However, in the treatment at 40°C, granules with fissures could still be observed at maturity (Fig. 6).

The results of evaluation of the size distribution of starch granules are shown in Table 3. The volume fraction (proportion of the volume) as A-type starch granules in grains from the 40°C treatment was lower than that in grains experiencing 30°C, whereas for B-type starch granules the reverse was true. The volume fraction of B-type starch granules was enhanced significantly (P<0·05), but that of type A starch granules reduced greatly under high temperature. High temperature reduced the volume of type A starch granules, mainly due to the reduction of type A (>20 μm) starch granules. The volume of type A (10–20 μm) starch granules was actually enhanced. The ratio of types A and B starch granules decreased significantly under heat shock (P<0·05).

Table 3. Effects of different temperatures after anthesis on starch granule size distribution in two wheat cultivars (25–27 DAA) (d.f.=3)

DISCUSSION

The yield and quality of wheat grains were dependent on genotype and environmental conditions. High temperature (>30°C) at the time of grain filling is one of the major constraints for increasing productivity of wheat in many countries (Rane & Nagarajan Reference Rane and Nagarajan2004). Increased temperature results in poorly filled, shrivelled grains. Kernels such as these, yield less white flour than filled mature grains (Bayles Reference Bayles1977). Guo et al. (Reference Guo, Shi, Peng, Feng, Ge and Zhu1998) showed that at high temperatures, the assimilating efficiency of the flag leaf is reduced and transportation and accumulation of 14C-assimilate were inhibited, which resulted in a significant decrease in grain weight.

The effects of high temperature on the grain growth depended on the timing of the heat shock and the degree of heat stress. Under the high temperature, the grain mass was decreased by reducing the duration of grain filling and grain weight decreased significantly, consistent with the findings of Bayles (Reference Bayles1977).

Starch (amylose and amylopectin) is the major storage component in wheat grain comprising 0·6–0·7 of dry weight (Morell et al. Reference Morell, Rahman, Abrahams and Appels1995). Changes in starch concentration are indicators of a variety of plant developmental processes, both positive and negative (Rodrigo et al. Reference Rodrigo, Rivas and Herrero1997). The composition of starch in wheat is an important determinant of grain quality. The timing and extent of high-temperature stress are crucial in determining its effects on starch concentration in grains. Zhao et al. (Reference Zhao, Dai, Jing, Jiang, Cao, Lu and Tian2006) showed that the concentrations of total starch and amylopectin were markedly reduced, but amylose concentration was affected slightly in higher-temperature treatments. Yan et al. (Reference Yan, Yin, Li, Liang, Li, Wu, Wang, Geng, Dai and Wang2008) showed that the total starch and amylopectin concentrations decreased significantly, but the amylose concentration increased in heat treatments in comparison with control. The present study found that high-temperature curtailment of the total starch concentration was due to the decreased amylopectin concentration, whereas the amylose concentration of grains remained relatively constant in both experiments (Figs 1 and 2). A decrease in grain amylopectin concentrations was shown at temperatures above 30°C, in comparison with those at the normal (outdoor) temperature in all treated days from anthesis to the 33rd DAA and with increased temperature (Figs 1 and 2).

The effects of high temperature during different grain-filling periods on the starch concentration have rarely been reported. The present study found that there were differences in starch concentration in responses to heat stress at the different filling stages. The results from repeated experiments in the two cultivars (Yangmai 9 and Yangmai 12) showed the same trend, in that high temperatures after anthesis had negative effects on starch concentration, which varied at different filling stages. The compensating effects of transferring to the normal environment after heat shock could not make up for the loss.

The mature wheat endosperm contains two types of starch granules: large (10–35 μm; A-type) and small (1–10 μm; B-type) (Chiotelli & Le Meste Reference Chiotelli and Le Meste2002). The work of Zhou et al. (Reference Zhou, Zhu, Wang and Lan2001) showed that amyloplasts are divided into 3 types, I, II and III, according to the axis structure. Type-I amyloplasts are large with an ellipsoid shape; type-II amyloplasts are intermediate amyloplasts with a compressed ellipsoid shape; and type-III are small amyloplasts with a spherical shape. However, little is known concerning the effects of different high-temperature regimes during the grain-filling period on the size and morphology of wheat starch granules. The present study found that two types of starch granules were present: large and small. Additionally, the results show that the size, shape and structure of starch granules in wheat grains are visibly different after heat-shock treatment. Yan et al. (Reference Yan, Yin, Li, Liang, Li, Wu, Wang, Geng, Dai and Wang2008) found that the volume of type A starch granules were enhanced significantly, but that of type B starch granules were greatly reduced under high temperature. However, the present research results showed that the volume of type A starch granules decreased and that of type B starch granules increased significantly (P<0·05). The volume of type A starch granules in both cultivars was decreased by heat shock, which limited the potential sink size for dry matter deposition in the grain. Based on the present results, the effect of high temperature on the volume of type A and B starch granules appears to be more important than the effect of variety.

Little was known about the effects of high temperature during different grain-filling periods on the morphology of starch granules. The present study observed that the shape and structure of starch granules, regardless of type, in wheat grains after heat shock were visibly different from the control. Heat damage at 30°C could be considerably compensated for in both cultivars, perhaps implying a protective mechanism existing in the endosperm up to a critical temperature.

Protective mechanisms that operate under adverse starch development conditions have been documented in many plant species. Bowler et al. (Reference Bowler, Van Montagu and Inze1992) concluded that the elimination of active oxygen species was an important protective mechanism in plants for numerous stressors including temperature stress. Heat-shock proteins (HSPs) that are induced in many plants were thought to play a function in improving the thermotolerance of cells under high-temperature stress (Baler et al. Reference Baler, Zou and Voellmy1996; Sung & Guy Reference Sung and Guy2003). It is probable that some protective mechanisms, such as enzymes or HSPs, exist in the endosperm at a critical temperature of 30°C. The results presented here suggest that a significant change in grain metabolism could take place when temperatures are above 30°C during grain development, a temperature where HSPs start to be produced in the vegetative tissues of wheat (Hendershot Reference Hendershot1992). The resistance to high temperature varied between the wheat cultivars tested in the present study, with Yangmai 9 being more tolerant than Yangmai 12.

It is obvious that improved filling and tighter compaction of starch granules would result in higher starch concentration, whereas changes in morphology and volume of granules caused by high-temperature stress could lead to lower starch concentration and starch viscosity. The present results demonstrated that high-temperature stress altered the morphology and reduced the volume of type A starch granules, and consequently starch deposition was retarded and starch concentration and starch viscosity were decreased.

This research work was financially supported by the National Natural Science Foundation of China (30571091, 30170540). This is Contribution No. 11-011-J from the Kansas Agricultural Experiment Station. Authors would like to thank Dr. M. E. Musgrave, The University of Connecticut, for reviewing the manuscript and critical suggestions.

References

REFERENCES

Baler, R., Zou, J. & Voellmy, R. (1996). Evidence for a role of HSP70 in the regulation of the heat shock response in mammalian cells. Cell Stress and Chaperones 1, 3339.2.3.CO;2>CrossRefGoogle ScholarPubMed
Bayles, R. A. (1977). Poorly filled grain in the cereal crop. I. The assessment of poor grain filling. Journal of National Institution of Agricultural Botany 14, 232240.Google Scholar
Bhullar, S. S. & Jenner, C. F. (1985). Differential responses to high temperatures of starch and nitrogen accumulation in the grain of four cultivars of wheat. Australian Journal of Plant Physiology 12, 363375.Google Scholar
Bowler, C., Van Montagu, C. & Inze, D. (1992). Superoxide dismutase and stress tolerance. Annual Review of Plant Physiology and Plant Molecular Biology 43, 83116.CrossRefGoogle Scholar
Chiotelli, E. & Le Meste, M. (2002). Effect of small and large wheat starch granules on thermomechanical behavior of starch. Cereal Chemistry 79, 286293.CrossRefGoogle Scholar
Feng, C. N., Guo, W. S., Shi, J. S., Peng, Y. X. & Zhu, X. K. (2000). Effect of high temperature after anthesis on endosperm cell development and grain weight in wheat. Acta Agronomica Sinica 26, 399405.Google Scholar
Guo, W. S., Shi, J. S., Peng, Y. X., Feng, C. N., Ge, C. L. & Zhu, X. K. (1998). Effect of high temperature on transportation of assimilates from wheat flag leaf during grain filling stage. Acta Agriculturae Nucleatae Sinica 12, 2127.Google Scholar
He, Z. F. (1985). Analysis Technique for Grain Quality of Cereals and Oils. Beijing, China: China Agriculture Press.Google Scholar
Hendershot, K. L. (1992). Induction temperature of heat-shock protein synthesis in wheat. Crop Science 32, 256261.CrossRefGoogle Scholar
Jenner, C. F. (1994). Starch synthesis in the kernel of wheat under high temperature conditions. Australian Journal of Plant Physiology 21, 791806.Google Scholar
Morell, M. K., Rahman, S., Abrahams, S. L. & Appels, R. (1995). The biochemistry and molecular biology of starch synthesis in cereals. Australian Journal of Plant Physiology 22, 647660.Google Scholar
Panozzo, J. F. & Eagles, H. A. (1998). Cultivar and environmental effects on quality characters in wheat. I. Starch. Australian Journal of Agricultural Research 49, 757766.CrossRefGoogle Scholar
Rane, J. & Nagarajan, N. (2004). High temperature index-for field evaluation of heat tolerance in wheat varieties. Agricultural Systems 79, 243255.CrossRefGoogle Scholar
Rodrigo, J., Rivas, E. & Herrero, M. (1997). Starch determination in plant tissues using a computerized image analysis system. Physiologia Plantarum 99, 105110.Google Scholar
SAS Institute Inc (1997). SAS/STAT User's Guide, Release 6.12. Cary, NC: SAS Institute, Inc.Google Scholar
Shah, N. H. & Paulsen, G. M. (2003). Interaction of drought and high temperature on photosynthesis and grain-filling of wheat. Plant and Soil 257, 219226.CrossRefGoogle Scholar
Sung, D. Y. & Guy, C. L. (2003). Physiological and molecular assessment of altered expression of Hsc70–1 in Arabidopsis. Evidence for pleiotropic consequence. Plant Physiology 132, 979987.CrossRefGoogle Scholar
Viswanathan, C. & Khanna-Chopra, R. (2001). Effect of heat stress on grain growth, starch synthesis and protein synthesis in grains of wheat (Triticum aestivum L.) varieties differing in grain weight stability. Journal of Agronomy and Crop Science 186, 17.CrossRefGoogle Scholar
Yan, S. H., Yin, Y. P., Li, W. Y., Liang, T. B., Li, Y., Wu, Y. H., Wang, P., Geng, Q. H., Dai, Z. M. & Wang, Z. L. (2008). Effect of high temperature during grain filling on starch accumulation, starch granule distribution, and activities of related enzymes in wheat grains. Acta Agronomica Sinica 34, 10921096.CrossRefGoogle Scholar
Zhao, H., Dai, T. B., Jing, Q., Jiang, D., Cao, W. X., Lu, W. & Tian, X. W. (2006). Effects of high temperature during grain filling on key enzymes involved in starch synthesis in two wheat cultivars with different quality types. Acta Agronomica Sinica 32, 423429.Google Scholar
Zhou, Z. Q., Zhu, X. T., Wang, W. J. & Lan, S. Y. (2001). Observation on the amyloplasts in endosperm of wheat varieties with different kernel types by scanning electron microscope. Journal of Chinese Electron Microscopy Society 20, 178184.Google Scholar
Figure 0

Table 1. Effects of different temperatures on total starch concentration in grains and filling duration in two wheat cultivars during the 2003/04 experiment (d.f.=3)

Figure 1

Table 2. Effects of varied temperature on total starch concentration in grains and filling duration in two wheat cultivars during the 2004/05 experiment (d.f.=3)

Figure 2

Fig. 1. Average total starch concentration (amylopectin+amylose) (mg/g) of (a) Yangmai 9 and (b) Yangmai 12 wheat exposed to a range of temperatures (25–40°C) at 15–17 to 33–35 DAA and average total starch concentration of wheat exposed to normal outdoor temperatures (dashed line) during the 2003/04 experiment. The total starch and amylopectin concentration in temperature above 30°C are significantly different from that in normal temperature (P<0·05, n=4). Bars represent s.e.m.

Figure 3

Fig. 2. Average total starch concentration (amylopectin+amylose) (mg/g) of (a) Yangmai 9 and (b) Yangmai 12 wheat exposed to a range of temperatures (25–40°C) at 1–3 to 36–38 DAA and the average total starch concentration of wheat exposed to normal outdoor temperatures (dashed line) during the 2004–2005 experiment. The total starch and amylopectin concentration in temperature above 30°C are significantly different from that in normal temperature (P<0·05, n=4). Bars represent s.e.m.

Figure 4

Fig. 3. RVA profile characteristics showing the effect of different temperatures (25–40°C) after anthesis on the pasting characteristics of grains sampled at different grain-filling periods (1–3, 6–8, 13–15, 19–21, 25–27 and 33–35 DAA for Yangmai 9 (left column) and Yangmai 12 (right column) in the 2004/05 experiment. The y-axis represents viscosity and the x-axis represents pasting time.

Figure 5

Fig. 4. ESEM micrographs of starch granules showing the effect of temperatures on the morphology of granules from 25 to 27 DAA in Yangmai 9 and Yangmai 12 during the 2003/04 experiment. The column entitled 25–27 represents ESEM micrographs taken one day after treatment. The column entitled Mature represents ESEM micrographs taken at kernel maturity (harvest). Rows represent 30 and 40°C treatments as well as normal, which represent kernels taken from wheat exposed to normal outdoor conditions. Arrows indicate fissures on starch granules. The columns entitled starch granule indicate images that haves been enlarged 3 times of image in the left column in order to accentuate the detailed morphology of starch granule especially fissures. Bars represent 20 μm.

Figure 6

Fig. 5. ESEM micrographs of starch granules of Yangmai 9 wheat showing the effect of high temperatures on the morphology of granules from different grain-filling periods and harvested at maturity for the 2004/05 experiment. Columns represent 30 and 40°C treatments. Rows represent different grain-filling periods (1–3, 6–8, 25–27 and 33–35 DAA). The panel labelled normal, mature represents kernels taken from Yangmai 9 wheat exposed to normal outdoor conditions. Bars represent 20 μm.

Figure 7

Fig. 6. ESEM micrographs of starch granules of Yangmai 12 wheat showing the effect of high temperature on the morphology of granules from different grain-filling periods and harvested at maturity for the 2004/05 experiment. Columns represent 30 and 40°C treatments. Rows represent different grain-filling periods (1–3, 6–8 and 25–27 DAA. The panel labelled normal, Mature represents kernels taken from Yangmai 12 wheat exposed to normal outdoor conditions. Arrows indica te fissures on starch granules. Bars represent 20 μm.

Figure 8

Table 3. Effects of different temperatures after anthesis on starch granule size distribution in two wheat cultivars (25–27 DAA) (d.f.=3)