Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-24T06:34:21.333Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of nm-Thin Inorganic Layered Fillers on the Crystallization of Polymer Nanocomposites

Published online by Cambridge University Press:  01 February 2011

H. Nakajima ,
Z. M. Wang ,
K. Strawhecker  and
E. Manias
H. Nakajima
Affiliation:
Materials Science and Engineering Department, Pennsylvania State University, 325-D Steidle Bldg, University Park, PA 16801
Z. M. Wang
Affiliation:
Materials Science and Engineering Department, Pennsylvania State University, 325-D Steidle Bldg, University Park, PA 16801
K. Strawhecker
Affiliation:
Materials Science and Engineering Department, Pennsylvania State University, 325-D Steidle Bldg, University Park, PA 16801
E. Manias
Affiliation:
Materials Science and Engineering Department, Pennsylvania State University, 325-D Steidle Bldg, University Park, PA 16801
Get access

Abstract

The crystallization behavior of polymers in nanocomposites with inorganic fillers (montmorillonite layered silicate, MMT) is reviewed. Various different polymers are comparatively discussed [poly(vinyl alcohol) (PVA), polypropylene (PP), syndiotactic-polystyrene (sPS), and poly(ethylene oxide) (PEO)] representing three types of filler/matrix interactions: strong specific interactions (PVA/MMT), weak/negligible interactions (sPS and PP/o-MMT), and “unfavorable” (PEO/MMT). In the case of PVA/MMT, crystallization of PVA is strongly promoted by MMT, also stabilizing a new crystal form not found in bulk PVA. For sPS and PP/o-MMT, crystallization is only moderately affected, exhibiting traces of simple heterogeneous nucleation and mostly bulk-like crystal structures, with very small traces on non-bulk crystals. For PEO, crystallization is impeded near the MMT surfaces, due to coordination of the surface cations to the PEO. In all cases smaller spherulite sizes develop when filler is added, independent of the size of the bulk polymer spherulites, whereas the crystallization temperature changes reflect the strength of the polymer/surface interactions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 791: Symposium Q – Mechanical Properties of Nanostructured Materials and Nanocomposites , 2003 , Q4.10
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Giannelis, E. P., Krishnamoorti, R., Manias, E., Advances in Polymer Science, 138:107 (1998)Google Scholar
[2] Alexandre, M., Dubois, P., Mater. Sci. Eng. R, 28:1 (2000)Google Scholar
[3] Licoln, D.M., Vaia, R.A., Wang, Z.G., Hsiao, B.S., Krishnamoorti, R., Polymer, 42:9975 (2001)Google Scholar
[4] Strawhecker, K., Manias, E., Macromolecules, 34:8475 (2001); Chem. Mater., 12:2943 (2000)Google Scholar
[5] Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., Chung, T.C., Chem. Mater., 13:3516 (2001)Google Scholar
[6] Wang, Z.M., Chung, T.C., Gilman, J.W., Manias, E. J. Polym. Sci. B: Polym. Phys. 41:3173 (2003)Google Scholar
[7] Strawhecker, K., and Manias, E. Chemistry of Materials 15:844 (2003).Google Scholar
[8] Maiti, P., Nam, P.H., Okamoto, M., Hasegawa, N., Usuki, A., Macromolecules, 35:2042 (2002)Google Scholar
[9] Wu, T.-M., S.-F., ; Hsu, J.-Y.Wu, J Polym Sci Part B:Polym Phys 41:560 (2003)Google Scholar