Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-20T04:16:15.145Z Has data issue: false hasContentIssue false

A Novel Approach to Obtain GeSbTe-Based High Speed Crystallizing Materials for Phase Change Optical Recording

Published online by Cambridge University Press:  21 March 2011

Tae-Yon Lee
Affiliation:
School of Materials Science and Engineering, Seoul National University, Shilim-dong, Kwanak-gu, Seoul 151-742, Korea
Byung-ki Cheong
Affiliation:
Materials Design Laboratory, Korea Institute of Science and Technology, Hawolgok-dong, Sungbuk-ku, Seoul 136-791, Korea
Taek Sung Lee
Affiliation:
Materials Design Laboratory, Korea Institute of Science and Technology, Hawolgok-dong, Sungbuk-ku, Seoul 136-791, Korea
Sung Jin Park
Affiliation:
Materials Design Laboratory, Korea Institute of Science and Technology, Hawolgok-dong, Sungbuk-ku, Seoul 136-791, Korea
Won Mok Kim
Affiliation:
Materials Design Laboratory, Korea Institute of Science and Technology, Hawolgok-dong, Sungbuk-ku, Seoul 136-791, Korea
Kyung Seok Lee
Affiliation:
Materials Design Laboratory, Korea Institute of Science and Technology, Hawolgok-dong, Sungbuk-ku, Seoul 136-791, Korea
Ki-Bum Kim
Affiliation:
School of Materials Science and Engineering, Seoul National University, Shilim-dong, Kwanak-gu, Seoul 151-742, Korea
Soon Gwang Kim
Affiliation:
Materials Design Laboratory, Korea Institute of Science and Technology, Hawolgok-dong, Sungbuk-ku, Seoul 136-791, Korea
Get access

Abstract

A new approach is proposed to obtain fast crystallizing materials based on a conventional GeSbTe alloy for rewritable phase change optical data storage. By means of co-sputtering, Ge1Sb2Te4alloy was mixed with Sn1Bi2Te4alloy so as to form pseudo-binary alloys (Ge1Sb2Te4)1-x(Sn1Bi2Te4)x (x is a mole fraction). From structural and optical analyses of the co- sputtered and annealed alloy films, the formation of stable crystalline single phases was observed along with a Vegard's law behavior, suggesting a homogeneous mixing of the two alloys. By use of a 4 layered disk with (Ge1Sb2Te4)0.85(Sn1Bi2Te4)0.15 recording layer, a preliminary test of writing and erasing was carried out and the results were compared with the case of the disk with Ge1Sb2Te4recording layer. The (Ge1Sb2Te4)0.85(Sn1Bi2Te4)0.15 recording layer was found to yield markedly higher erasibility, especially with increasing disk linear velocity.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ohno, E., Yamada, N., Kurumizawa, T., Kimura, K., and Takao, M., Jpn. J. Appl. Phys. 28 (7), 1235 (1989)Google Scholar
2. Jiang, F., Jiang, M., Hou, L., Gan, F., and Okuda, M., Proceedings of International Sympositum on Optical Memory, 28(Suppl. 28-3), 293 (1989)Google Scholar
3. Trappe, C., Bechevet, B., Hyot, B., Winkler, O., Facsko, S. and Kurz, H., Jpn. J. Appl. Phys. 39 (2B), 766 (2000)Google Scholar
4. Kojima, R. and Yamada, N., Proceedings of the 12th Symposium on Phase Change Optical Information Storage, Shizuoka, Japan, p36 (2000)Google Scholar
5. Lee, C.M., Chin, T.S., and Huang, E.Y., J. Appl. Phys. 89 (6), 3290 (2001)Google Scholar
6. Yamada, N., Otoba, M., Kawahara, K., Miyagawa, N., Ohta, H., Akahira, N., and Matsunaga, T., Jpn. J. Appl. Phys. 37 (4B), 2104 (1998)Google Scholar
7. Zhou, G.F. and Jacobs, B.A.J., Jpn. J. Appl. Phys. 38 (3B), 1625 (1999)Google Scholar
8. Lide, D. R. (ed.) Handbook of Chemistry and Physics, 81st ed., The Chemical Rubber Company, Florida, 952 (2000)Google Scholar
9. Agaev, K.A. and Talybov, A.G., Kristallografiya, 11 (3), 400 (1966)Google Scholar
10. Zhukova, T.B. and Zaslavskii, A.I., Kristallografiya, 16 (5), 796 (1971)Google Scholar
11. Villars, P., Prince, A., and Okamoto, (eds.) Handbook of Ternary Alloy Phase Diagrams, ASM International, Ohio (1997)Google Scholar