Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-24T10:32:38.064Z Has data issue: false hasContentIssue false

Influence of design parameters on dark current of vertically integrated a-Si:H diodes.

Published online by Cambridge University Press:  01 February 2011

C. Miazza
Affiliation:
Institut de Microtechnique, Université de Neuchâtel, Breguet 2, 2000 Neuchâtel, Switzerland
N. Wyrsch
Affiliation:
Institut de Microtechnique, Université de Neuchâtel, Breguet 2, 2000 Neuchâtel, Switzerland
G. Choong
Affiliation:
Institut de Microtechnique, Université de Neuchâtel, Breguet 2, 2000 Neuchâtel, Switzerland
S. Dunand
Affiliation:
Institut de Microtechnique, Université de Neuchâtel, Breguet 2, 2000 Neuchâtel, Switzerland
C. Ballif
Affiliation:
Institut de Microtechnique, Université de Neuchâtel, Breguet 2, 2000 Neuchâtel, Switzerland
A. Shah
Affiliation:
Institut de Microtechnique, Université de Neuchâtel, Breguet 2, 2000 Neuchâtel, Switzerland
N. Blanc
Affiliation:
CSEM SA, Badenerstrasse 569, P.O. Box, 8048 Zurich, Switzerland
F. Lustenberger
Affiliation:
CSEM SA, Badenerstrasse 569, P.O. Box, 8048 Zurich, Switzerland
R. Kaufmann
Affiliation:
CSEM SA, Badenerstrasse 569, P.O. Box, 8048 Zurich, Switzerland
M. Despeisse
Affiliation:
CERN, CERN Meyrin, 1211 Geneva 23, Switzerland.
P. Jarron
Affiliation:
CERN, CERN Meyrin, 1211 Geneva 23, Switzerland.
Get access

Abstract

Image and particle sensors based on thin film on CMOS (TFC) technology, where a-Si:H detectors are vertically integrated on top of a CMOS chip, basically provide high sensitivity and low dark current densities (Jdark). However, as shown in previous work and as confirmed by the actual measurements, Jdark values depend on the topology of the chip and on the detector structure used.

The present paper describes a systematic study carried out, both with test structures on glass and also with a dedicated CMOS test chip designed by CERN. The increase in Jdark is shown to be related to border effects, and especially on the detailed structure of the pixel periphery. In all cases, lower Jdark are obtained when one uses metal-i-p instead of n-i-p configuration detectors. Transferring these results to the standard TFC sensors used by them, the authors have obtained values of Jdark as low as 20 pA/cm2 at -1 V reverse bias.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Lulé, T., Schneider, B., Böhm, M., IEEE J. of Solid-State Circuits 34, 1999, p.704.Google Scholar
[2] Blecher, F., Coors, S., Eckhardt, A., Mütze, F., Schneider, B., Seibel, K., Sterzel, J., Böhm, M., Int. Conf. on Mechatronics & Machine Vision in Practice, Nanjing, China (2000).Google Scholar
[3] Wyrsch, N.et al., MRS, San Francisco, Vol. 808, 2004, p.441.Google Scholar
[4] Moraes, D.et al., Journal of Non-Crystalline Solids, 338-340, 2004, p.729.Google Scholar
[5] Despeisse, M.et al., Nuclear Instr. and Methods in Physics Research, A 518, 2004, p.357 Google Scholar
[6] Lule, T.et al., IEEE Transactions on Electron Devices, Vol. 47, No 11, 2000, p.2110.Google Scholar
[7] Schneider, B.et al., Handbook on Comp. Vis. and Appl., Ac. Press, Boston, 1999, p. 237 Google Scholar
[8] Meillaud, F.et al., to be published in Solar Energy and Materials.Google Scholar
[9] Street, R.A., Appl.Phys.Lett. 57 (13), pp.13341336 (1990).Google Scholar
[10] Wyrsch, N.et al., MRS, San Francisco, Vol. 762, 2003, p. 205.Google Scholar
[11] Miazza, C.et al., MRS, San Francisco, Vol. 808, 2004, p. 513 Google Scholar
[12] Schiff, E.A., Street, R.A., Journal of Non-Crystalline Solids, 198-200, 1996, p.1155 Google Scholar