Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-19T05:16:30.091Z Has data issue: false hasContentIssue false
  • English
  • Français

Potential Resources from Coal Fly Ash

Published online by Cambridge University Press:  25 February 2011

J. S. Watson
J. S. Watson*
Affiliation:
Chemical Technology Division, Oak Ridge National Laboratory, P.O. Box X, Oak Ridge, TN 37831
Get access

Abstract

Recent studies at Oak Ridge National Laboratory (ORNL) and elsewhere have identified various chemical processes for recovering useful materials, such as alumina and iron oxides, from coal combustion fly ash. Based on certain assumptions, each of these processes can yield useful products at economical prices. Most processes leave a residual solid waste with a volume only slightly less than that of the original waste. This residue may not present a serious hazard, but its volume alone makes disposal difficult for utilities with limited land available for disposal sites. Characteristics of some of the residues are being studied to determine possible beneficial uses or applications of these by-products.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 43: Symposium M – Fly Ash and Coal Conversion By-Products I , 1984 , 151
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hulett, L. D., Weinberger, A. J., Northcutt, K. J., and Ferguson, M., “Chemical Species in Fly Ash from Coal Burning Power Plants,” Science, 210, 1356 (1980).10.1126/science.210.4476.1356Google Scholar
2. Kelmers, A. D., Canon, R. M., Egan, B. Z., Felker, L. K., Gilliam, T. M., Jones, G., Owen, G. D., Seeley, F. G., and Watson, J. S., “Chemistry of the Direct Acid Leach, Calsinter, and Pressure Digestion-Acid Leach Methods for the Recovery of Aluminum from Fly Ash,” Resources and Conservation, 9, 271 (1982).10.1016/0166-3097(82)90081-5CrossRefGoogle Scholar
3. Roy, N. K., Murtha, M. U., and Burnet, G., “Use of Magnetic Fraction of Fly Ash as a Heavy Medium Material in Coal Washing,” in Proceedings of the Fifth Ash Utilization Symposium, Atlanta, Georgia, Feb. 25–27, 1979, p. 29.Google Scholar
4. Aldrich, R. G. and Zacharias, W. J., “Fly Ash Magnetite--A Commercial Realization,” in Proceedings of the Sixth International Ash Utilization Symposium, Reno, Nevada, DOE/METC/82–52, Vol.2, 1982.Google Scholar
5. Kurgan, G. J., Balestrino, J. M., and Verma, P. S., “Market Survey of Fly-Ash-Derived Magnetite,” Electric Power Research Institute Report No. EPRI CS-3615, 1984.Google Scholar
6. Murtha, M. J. and Burnet, G., “Some Recent Developments in the Lime-Fly Ash Process for Alumina and Cement,” Resources and Conservation, 9, 301 (1982).10.1016/0166-3097(82)90083-9Google Scholar
7. Chesley, J. A., Murtha, M. J., and Burnet, G., “Utilization of Lime-Sinter Process Residue for the Manufacture of a Low-Alumina Portland Cement,” presented at 96th Annual Meeting of the Iowa Academy of Science, Iowa City, Iowa, Apr. 27–28, 1984.Google Scholar
8. Dobbins, M. S. and Burnet, G., “A Molten Salt Reactor for Dispersed Solid Phase Chlorination,” presented at the AIChE Meeting, San Francisco, California, Nov. 25–30, 1984.Google Scholar
9. Adelman, D. J., “High-Temperature Chlorination of Coal Fly Ash,” M.S. Thesis, Iowa State University (1980).Google Scholar
10. Felker, L. K. and Seeley, F. G., “Chemical Development of the Calsinter Process for Recovering Resource Materials from Fly Ash,” Oak Ridge National Laboratory Report No. ORNL/TM-7613, 1981.Google Scholar
11. Eisele, J. A., Schultze, L. E., Berinati, D. J., and Bauer, D. J., “Amine Extraction of Iron from Aluminum Chloride Leach Liquors,” Report of Investigation 8188, U.S. Bureau of Mines, 1976.Google Scholar
12. Burtch, J. W., “The PORI Process: Regeneration of Hydrochloric Acid from Spent Pickle Liquor,” Wire Journal, 57 (1976).Google Scholar
13. Canon, R. M., Gilliam, T. M., and Watson, J. S., “Evaluation of Potential Processes for Recovery of Metals from Coal Ash,” Electric Power Research Institute Report No. EPRI CS-1992, Vols. 1 and 2, 1981.Google Scholar
14. Gilliam, T. M., Canon, R. M., Egan, B. Z., Kelmers, A. D., Seeley, F. G., and Watson, J. S., “Economic Metal Recovery from Fly Ash,” Resources and Conservation, 9, 155 (1982).10.1016/0166-3097(82)90071-2CrossRefGoogle Scholar
15. Wilder, R. F., Barrett, P. J., Henslee, L. W. Jr., and Arpi, D., “Recovery of Metal Oxides from Fly Ash,” Electric Power Research Institute Report No. EPRI CS-3544, Vols. 1, 2, and 3, 1984.Google Scholar