Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-24T08:39:08.611Z Has data issue: false hasContentIssue false

Threshold voltage-level change in ASK demodulator related to RF input signal amplitude for the ultra-high frequency RFID passive tag

Published online by Cambridge University Press:  23 November 2015

Rezvan Dastanian
Affiliation:
Imam Hussein Faculty of Engineering, Behbahan Khatam Alanbia University of Technology, Behbahan, Iran. Phone: +989166728851
Ebrahim Abiri*
Affiliation:
Department of Electrical and Electronics Engineering, Shiraz University of Technology, Modarres Boulevard, Shiraz, Iran
Khadije Taherinia
Affiliation:
Department of Electrical and Electronics Engineering, Shiraz University of Technology, Modarres Boulevard, Shiraz, Iran
*
Corresponding author: E. Abiri Email: abiri@sutech.ac.ir

Abstract

In this paper, an amplitude shift keying (ASK) demodulator with 100% modulation depth is proposed. In order to achieve the higher power and wider reading range the designed ASK demodulator works in the ultra-high frequency. In this design, the average detector and voltage divider are used in order to define the appropriate threshold voltage level for the radio frequency input signal which leads to the accurate data detecting even at long distances between the tag and reader. In addition, for diminishing the power dissipation of the proposed demodulator, an enable input is used in the buffer and comparator. This circuit is simulated in 0.18 μm complementary metal–oxide–semiconductor (CMOS) technology with Cadence software. Its power dissipation and chip area are 3.9 nW and 0.0025 mm2, respectively.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] EPCglobal, EPCTM Radio-Frequency Identity Protocols Class-1 Generation-2 UHF RFID Protocol for Communications at 860 MHz-960 MHz version 1.1.0, 2005.Google Scholar
[2] Ashry, A.; Sharaf, K.; Ibrahim, M.: A compact low-power UHF RFID tag. Microelectron. J., 40 (11) (2009), 15041513.Google Scholar
[3] Najafi, V.; Mohammadi, S.; Roostaie, V.; Fotowat-Ahmady, A.: A dual mode EPC Gen 2 UHF RFID tag in 0.18 µm CMOS. Microelectron. J., 41 (8) (2010), 458464.Google Scholar
[4] Pelissier, M. et al. : A 112 Mb/s full duplex remotely-powered impulse-UWB RFID transceiver for wireless NV-memory applications. IEEE J. Solid-State Circuits, 46 (4) (2011), 916927.Google Scholar
[5] Yeager, D.; Zhang, F.; Zarrasvand, A.; George, N.; Daniel, T.; Otis, B.: A 9 µA, addressable Gen2 sensor tag for biosignal acquisition. IEEE J. Solid-State Circuits, 45 (10) (2010), 21982209.Google Scholar
[6] Yi, J.; Ki, W.H.; Tsui, C.Y.: Analysis and design strategy of UHF micro-power CMOS rectifiers for micro-sensor and RFID applications. IEEE Trans. Circuits Syst. I, 54 (1) (2007), 153166.Google Scholar
[7] Lee, S.Y.; Wang, L.H.; Fang, Q.: A low-power RFID integrated circuits for intelligent healthcare systems. IEEE Trans. Inf. Technol. Biomed., 14 (6) (2010), 13871396.Google Scholar
[8] Balachandran, G.K.; Barnett, R.E.: A passive UHF RFID demodulator with RF overvoltage protection and automatic weighted threshold adjustment. IEEE Trans. Circuits Syst. I, 57 (9) (2010), 22912300.CrossRefGoogle Scholar
[9] Reinisch, H. et al. : A multifrequency passive sensing tag with on-chip temperature sensor and off-chip sensor interface using EPC HF and UHF RFID technology. IEEE J. Solid-State Circuit, 46 (12) (2011), 30753088.CrossRefGoogle Scholar