Accelerator mass spectrometry (AMS) is a worldwide recognized method for radiocarbon (14C) dating. The advantageous aspects of this method include the variety of materials and the small sample size (1 mg of carbon) that can be measured. However, these pose several challenges in the laboratory, such as developing appropriate chemical pretreatment methods. In the summer of 2022, the Radiocarbon and Mass Spectrometry Laboratory in Gliwice, Poland, launched the MICADAS accelerator spectrometer. The report on background and reference materials measurement results for the period from September 2022 to July 2024 is presented in this publication. Quality assurance and quality control processes are extremely important to guarantee the high quality of the results obtained in the laboratory. Hence, our Radiocarbon and Mass Spectrometry Laboratory in Gliwice took part in the Glasgow International Radiocarbon Inter-Comparison (GIRI) program. The radiocarbon ages for wood, bone, humic acid, and barley mash samples were determined and compared with reported values. The resulting data confirmed that our Laboratory is capable of dating samples across a spectrum of materials and ages ranging from contemporary to the limits of the radiocarbon method, achieving precision on par with that of other laboratories.

This paper compares various wood pretreatment methods for highly degraded, and problematic fossil wood extracted from the opencast Szczerców site of the Bełchatów Lignite Mine in Central Poland. The study evaluates the pretreatment methods using both large samples (55–255 g, referred to as series A) and small samples (36–150 mg, referred to as series B). Additionally, all preparation methods were applied to medium-sized samples (approximately 3 g, referred to as series C) with solvent washes in the Soxhlet apparatus. Radiocarbon dating was conducted using the LSC technique (subseries A1) and the AMS technique (subseries A2, series B, and C). The effectiveness and utility of each pretreatment protocol were compared based on 14C measurements and FTIR analysis. Through the conducted research and a multi-criteria analysis, the most effective method for preparing old fossil wood was identified. Our experience indicates that an extended, multistage preparation of highly degraded fossil wood samples, with a 14C concentration near the detection limit of the radiocarbon method, may result in a significant increase in 14C content.

The increase in biobased material usage requires the methods of verification to investigate the actual content of biocarbon in such materials, including liquid fuels. The determination of biocarbon in liquid samples using 14C required adaptation of existing sample preparation methods. In this study, both accelerator mass spectrometry (AMS) and liquid scintillation counting (LSC) methods were used to determine the content of 14C in six different liquid fuel blends produced from purely bio-based hydrotreated vegetable oil (HVO) and a 14C-free petrodiesel sample (ON/UF-BC). The results obtained for pure petrodiesel provide background values. The results indicate a good agreement between LSC and AMS, and a linear correlation between the 14C measurement results for blended samples and HVO content affirmed the reproducibility between the two methods. The repeatability of AMS results was tested on 10 aliquots of one of the blends, and the results were deemed reproducible.

Radiocarbon (14C) methodology was used to investigate the presence of biocarbon in different bio-based disposable packaging products. Packaging waste contributes to a municipal solid waste, which is increasing environmental concerns and resulting in the enhancement of EU regulations that aim to reduce packaging waste. The 14C amount in samples reflects how much of the biocarbon has been used. In this study, the concentration of 14C was determined in commonly used types of disposable packaging, such as cups, plates, straws, cutlery, and baking paper. Samples were made of materials such as paper, wheat bran, sugarcane, and wood. The mean concentration of the 14C isotope, measured by the accelerator mass spectrometry (AMS) technique, is greater than 100 pMC in all tested samples, indicating that the samples are modern. The relatively high 14C concentration values in the waterproof layer of the sample indicate that bioplastic, rather than plastic, was used in its production. The highest 14C isotope concentration values were measured for samples that used the oldest biomass (wood and paper), and the lowest for products from current crops (sugarcane and wheat bran), which is consistent with the trend of changes in 14C concentration in the biosphere. The study also addresses the problem of heterogeneity and representativeness of subsamples.

Preparation of bones for radiocarbon (14C) dating is still quite a challenge for researchers. The methods are being tested and improved, to increase reliability of dating results and to verify the previous ones. In this work, a set of gelatine samples, extracted from Cervus elaphus and Cervus canadensis bones from various sites in Europe and a set of human bones from archaeological sites in Poland were subjected to retreatment using ultrafiltration in Gliwice Radiocarbon Laboratory. The tested samples represent a wide range of ages, from older than 40,000 14C years BP to modern. The prepared material was subjected to the measurement of C/N atomic ratios and 14C dating using the accelerator mass spectrometry (AMS) technique. Also, the stable isotopes (δ13C and δ15N) values were determined. In a few cases ultrafiltration allows to improve gelatine quality for long-stored samples, by increasing the %C and %N as well as decreasing C/Nat ratios. Nevertheless, this effect was not observed for majority of the samples. Remeasurements of long-term stored samples give mostly the same 14C ages for ultrafiltered ones and for those without ultrafiltration.

We present case studies on three objects of high importance for cultural heritage in southern Poland, dated in years 2018–2022 at the Gliwice 14C and Mass Spectrometry Laboratory with radiocarbon (14C) and dendrochronology methods. The first was a richly ornamented wooden cane, discovered during excavations on the market in Bytom city. The cane can be associated with medieval court proceedings. The archaeological context indicates the 13th century AD, and the 14C result corresponds perfectly with this time, confirming that it is the oldest object of this type in Poland. The second was a 4-m-tall oak column from St. Leonard Church in Lipnica Murowana, a UNESCO heritage site. The local story said it was previously devoted to Światowid, a pagan deity. Our analysis excluded the pre-Christian age, as the tree was felled no earlier than the late 15th century, which is in agreement with historical records. The third was a wooden Saint Lawrence Church in Bobrowniki. The presbytery was covered with up to five layers of polychromic paintings, some of high artistic value. We dated three samples from the original wooden board, and by wiggle-matching, the calibrated age interval was narrowed to 1731–1754 cal AD.

Here, we present the results of carbon isotope and elemental analysis of one-year-old Pinus Sylvestris L. needles collected in 2021 from 10 sampling sites in a highly populated and industrialized area of Poland. The needles were exposed to air pollution for one year. The chemical analysis of the samples was performed using different methods: radiocarbon analysis by accelerator mass spectrometry, stable isotope analysis using isotope ratio mass spectrometry, and elemental analysis by inductively coupled plasma-atomic emission spectroscopy. Variations in the carbon isotopes and elemental composition of pine needles were due to a mixture of carbon dioxide originating from different sources such as households, vehicle traffic, and industrial factories.

Wasted tires are the great source of fuel and valuable components but could be a cause of environmental and land pollution. This study shows the detailed method for the determination of radiocarbon isotope (14C) concentration in tires and their pyrolysis products. Samples are taken from truck and passenger car tires in the form of shredded rubber, pyrolysis oil and recovered carbon black. Liquid scintillation counting (LSC) and accelerator mass spectrometry (AMS) techniques were used for the investigation at Gliwice Radiocarbon and Mass Spectrometry Laboratory, and National Laboratory for Age Determination, Trondheim, Norway. The results are in good agreement. Radiocarbon concentration of the rubber varies significantly because of its complex structure and composition within the tires. The 14C concentration values were found to be higher in pyrolytic oil compared to rubber, and greater in truck tires rather than car tires.

This paper presents 66 radiocarbon (14C) dates obtained at 33 key sites from the Polish part of the European Sand Belt. These calibrated dating results were compared to 34 high-resolution 14C dates obtained from a fluvial-aeolian sediments to identify pedogenic phases from the late Pleniglacial interval to the early Holocene. These identified pedogenic phases were correlated with Greenland ice-core records, revealing high sensitivity of the fluvio-aeolian paleoenvironment to climate changes. Two pedogenic phases were identified from the late Pleniglacial interval (Greenland Stadial GS-2.1b and GS-2.1a), three from the Bølling-Allerød interstadial (Greenland Stadial GI-1), one from the late Allerød–Younger Dryas boundary, and at least one from the Younger Dryas. The ages of these pedogenic phases reveal a distinct delay of 50–100 calendar years after the onset of cool climate conditions during GI-1, reflecting gradual withdrawal of vegetation. Soil horizons from the early Holocene do not show any clear relation with climate change, where breaks in soil formation were caused by local factors such as human activity.

Determining the biocomponents in liquid fuels using radiocarbon radioisotope (14C) dating requires sample preparation adaptations to the conditions of the Gliwice Radiocarbon and Mass Spectrometry Laboratory. Liquid scintillation counting (LSC), and accelerator mass spectrometry (AMS) were investigated using six samples, including one 14C-free fuel and modern hydrotreated vegetable oil (HVO). For AMS, samples were prepared using tin capsules for liquids for EA combustion and graphitization in an AGE system. For LSC, liquid fuels were prepared by mixing with purified preheated sand and a benzene synthesis line. Benzene resublimation was also tested. IRMS measurements were also conducted for benzene to account for isotopic fractionation. Sample background measurements using both methods showed good performances by both AMS and LSC without resublimation. Comparable results were also obtained for HVO.