The global transition towards diets high in calories has contributed to 2.1 billion people becoming overweight, or obese, which damages male reproduction and harms offspring. Recently, more and more studies have shown that paternal exposure to stress closely affects the health of offspring in an intergenerational and transgenerational way. SET Domain Containing 2 (SETD2), a key epigenetic gene, is highly conserved among species, is a crucial methyltransferase for converting histone 3 lysine 36 dimethylation (H3K36me2) into histone 3 lysine 36 trimethylation (H3K36me3), and plays an important regulator in the response to stress. In this study, we compared patterns of SETD2 expression and the H3K36me3 pattern in pre-implantation embryos derived from normal or obese mice induced by high diet. The results showed that SETD2 mRNA was significantly higher in the high-fat diet (HFD) group than the control diet (CD) group at the 2-cell, 4-cell, 8-cell, and 16-cell stages, and at the morula and blastocyst stages. The relative levels of H3K36me3 in the HFD group at the 2-cell, 4-cell, 8-cell, 16-cell, morula stage, and blastocyst stage were significantly higher than in the CD group. These results indicated that dietary changes in parental generation (F0) male mice fed a HFD were traceable in SETD2/H3K36me3 in embryos, and that a paternal high-fat diet brings about adverse effects for offspring that might be related to SETD2/H3K36me3, which throws new light on the effect of paternal obesity on offspring from an epigenetic perspective.

The Palaeo-Mesozoic geodynamic evolution of the Tangjia–Sumdo accretionary complex belt, which separates the North and South Lhasa Terrane, remains controversial. Moreover, the lack of geological records restricts the understanding of the evolution of the Sumdo Palaeo-Tethys Ocean from the middle Permian until the middle Triassic. Here we present zircon U–Pb geochronology, whole-rock geochemistry and Sr–Nd–Hf isotopic compositions of the Yeqing gabbro. Zircon U–Pb geochronology yields ages from 254 ± 1 to 249 ± 1 Ma. In situ Hf isotopic analyses yield ϵ Hf(t) values of −0.2 to +6.3. These samples have high TiO2 (3.69 wt %) and P2O5 (0.78 wt %) contents, with typical patterns like ocean island basalt (OIB). Besides, they are classified as high-Nb basalts (HNBs) based on the high content of Nb (45.3–113.5 ppm). Whole-rock Sr–Nd isotopic compositions are similar to OIB, with initial 87Sr/86Sr of 0.7047–0.7054, 143Nd/144Nd of 0.512526–0.512647 and ϵ Nd(t) of 0.3–2.7. These signatures suggest that the Yeqing gabbro is mainly derived from low-degree melting of the garnet lherzolite mantle. Based on field observations of HNBs intruding into the continental margin and their geochemical characteristics, we infer that the Yeqing gabbro was generated in a subduction environment. Combined with the regional geology of the subduction environment and the evolution of oceanic islands in the Sumdo Palaeo-Tethys Ocean, we propose that the Yeqing gabbro may represent a product of the asthenosphere upwelling through a slab window produced by subduction of seismic ridge in the Sumdo Palaeo-Tethys Ocean, called plume – subduction-zone interaction, during the late Permian to early Triassic.

We presented the first photometric and orbital period investigations for four W Ursae Majoris-type binaries: V473 And, V805 And, LQ Com, and EG CVn. The photometric solutions suggested that V805 And and LQ Com are two total-eclipse contact binaries, while V473 And and EG CVn are partial-eclipse ones. V473 And and LQ Com belong to the A-subtype contact binaries, while V805 And and EG CVn belong to the W subtype. The O’Connell effects found in the light curves of V805 And, LQ Com, and EG CVn can be interpreted as a result of a cool spot on the surface of their less massive and hotter primary components. Based on two different methods, the absolute physical parameters were properly determined. Combining the eclipse timings derived from our observations and survey’s data with those collected from literature, we investigated their orbital period variations. The results show that the orbital periods of V473 And, V805 And, and EG CVn are undergoing a secular decrease/increase superposed a periodic variation, while LQ Com exhibits a possible cyclic period variation with a small amplitude. The secular period changes are caused mainly by the mass transfer between two components, while the cyclic period oscillations may be interpreted as the results of either the light-time effect due to the third body or the cyclic magnetic activity. Finally, we made a statistical investigation for nearly 200 contact binaries with reliable physical parameters. The statistical results suggested that the W-subtype systems are more evolved than the A-subtype ones. Furthermore, the evolutionary direction of A-subtype into W-subtype systems is also discussed. The opposite evolutionary direction seems to be unlikely because it requires an increase of the total mass, the orbital angular momentum, and the temperature differences between two components of a binary system.

The article aims to estimate and forecast the transmissibility of shigellosis and explore the association of meteorological factors with shigellosis. The mathematical model named Susceptible–Exposed–Symptomatic/Asymptomatic–Recovered–Water/Food (SEIARW) was used to explore the feature of shigellosis transmission based on the data of Wuhan City, China, from 2005 to 2017. The study applied effective reproduction number (Reff) to estimate the transmissibility. Daily meteorological data from 2008 to 2017 were used to determine Spearman's correlation with reported new cases and Reff. The SEIARW model fit the data well (χ2 = 0.00046, p > 0.999). The simulation results showed that the reservoir-to-person transmission of the shigellosis route has been interrupted. The Reff would be reduced to a transmission threshold of 1.00 (95% confidence interval (CI) 0.82–1.19) in 2035. Reducing the infectious period to 11.25 days would also decrease the value of Reff to 0.99. There was a significant correlation between new cases of shigellosis and atmospheric pressure, temperature, wind speed and sun hours per day. The correlation coefficients, although statistically significant, were very low (<0.3). In Wuhan, China, the main transmission pattern of shigellosis is person-to-person. Meteorological factors, especially daily atmospheric pressure and temperature, may influence the epidemic of shigellosis.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

In the laser plasma interaction of quantum electrodynamics (QED)-dominated regime, γ-rays are generated due to synchrotron radiation from high-energy electrons traveling in a strong background electromagnetic field. With the aid of 2D particle-in-cell code including QED physics, we investigate the preplasma effect on the γ-ray generation during the interaction between an ultraintense laser pulse and solid targets. We found that with the increasing preplasma scale length, the γ-ray emission is enhanced significantly and finally reaches a steady state. Meanwhile, the γ-ray beam becomes collimated. This shows that, in some cases, the preplasmas will be piled up acting as a plasma mirror in the underdense preplasma region, where the γ-rays are produced by the collision between the forward electrons and the reflected laser fields from the piled plasma. The piled plasma plays the same role as the usual reflection mirror made from a solid target. Thus, a single solid target with proper scale length preplasma can serve as a manufactural and robust γ-ray source.

Archaeological excavations at Kota Tampan in West Malaysia recovered a large stone assemblage dated to 70 kya and believed to be associated with the presence of early Anatomically Modern Humans in Mainland Southeast Asia. New technological analysis demonstrates that almost all these stone artefacts result from early stage reduction through freehand and bipolar percussion.

Accurate torque control is a critical issue in the compliant human–robot interaction scenario, which is, however, challenging due to the ever-changing human intentions, input delay, and various disturbances. Even worse, the performances of existing control strategies are limited on account of the compromise between precision and stability. To this end, this paper presents a novel high-performance torque control scheme without compromise. In this scheme, a new nonlinear disturbance observer incorporated with equivalent control concept is proposed, where the faster convergence and stronger anti-noise capability can be obtained simultaneously. Meanwhile, a continuous fractional power control law is designed with an iteration method to address the matched/unmatched disturbance rejection and global finite-time convergence. Moreover, the finite-time stability proof and prescribed control performance are guaranteed using constructed Lyapunov function with adding power integrator technique. Both the simulation and experiments demonstrate enhanced control accuracy, faster convergence rate, perfect disturbance rejection capability, and stronger robustness of the proposed control scheme. Furthermore, the evaluated assistance effects present improved gait patterns and reduced muscle efforts during walking and upstair activity.

To investigate the effects of dietary fibre on follicular atresia in pigs fed a high-fat diet, we fed thirty-two prepubescent gilts a basal diet (CON) or a CON diet supplemented with 300 g/d dietary fibre (fibre), 240 g/d soya oil (SO) or both (fibre + SO). At the 19th day of the 4th oestrus cycle, gilts fed the SO diet showed 112 % more atretic follicles and greater expression of the apoptotic markers, Bax and caspase-3, and these effects were reversed by the fibre diet. The abundance of SCFA-producing microbes was decreased by the SO diet, but this effect was reversed by fibre treatment. Concentrations of serotonin and melatonin in the serum and follicular fluid were increased by the fibre diet. Overall, dietary fibre protected against high fat feeding-induced follicular atresia at least partly via gut microbiota-related serotonin–melatonin synthesis. These results provide insight into preventing negative effects on fertility in humans consuming a high-energy diet.

Residual strain often occurs in metal when it was subjected to the tension load, random vibration, or high impact. The mild steel was selected as the research object, and the feasibility of using nonlinear ultrasonic technique to characterize the residual strain was investigated in this paper. First, the mild steel specimens were stretched to several different kinds of stress, then the nonlinear effect as well as the microstrain of each sample was measured. The results indicate that the microstrain increases with increasing applied stress and reaches a maximum value of about 0.036% as the tensile stress increases to the elastic limit. Compared with the original specimen, the nonlinear parameter of tensile specimen gradually increased within the elastic limit. This result reveals that the variation of nonlinear parameter was related to microstrain in mild steel, because the microstructure observation demonstrated that the dislocation structure was basically unchanged within the elastic limit. This research indicates that the nonlinear ultrasonic method has the promising potential to characterize the microstrain in metals.

Previous studies have indicated that some food items and nutrients are associated with uric acid metabolism in humans. However, little is known about the role of dietary patterns in hyperuricaemia. We designed this case–control study to evaluate the associations between dietary patterns and newly diagnosed hyperuricaemia in Chinese adults. A total of 1422 cases and 1422 controls were generated from 14 538 participants using the 1:1 ratio propensity score matching methods. Dietary intake was assessed using a validated self-administered FFQ. Dietary patterns were derived by factor analysis. Hyperuricaemia was defined as concentrations of serum uric acid higher than 7 mg/dl (416·5 μmol/l) for men and 6 mg/dl (357 μmol/l) for women. Three dietary patterns were derived by factor analysis: sweet pattern; vegetable pattern; animal foods pattern. The animal foods pattern characterised by higher intake of an animal organ, seafood and processed meat products was associated with higher prevalence of newly diagnosed hyperuricaemia (Pfor trend<0·01) after adjustment. Compared with the participants in the lowest quartile of the animal foods pattern, the OR of newly diagnosed hyperuricaemia in the highest quartile was 1·50 (95 % CI 1·20, 1·87). The other two dietary patterns were not associated with the prevalence of newly diagnosed hyperuricaemia after adjustment. In conclusion, a diet rich in animal organ, seafood and processed meat products is associated with higher prevalence of newly diagnosed hyperuricaemia in a Chinese population. Further cohort studies and randomised controlled trials are required to clarify these findings.

Sulphur isotopes can be used as a powerful tool to trace fluid evolution and explore the formation of chimneys. To clarify the in situ S isotopic variations of sulphides at the micro-scale, we analyzed a sulphide chimney collected from the hydrothermal field in the East Pacific Rise 1–2° S using a sensitive high-mass-resolution ion micro-probe for stable isotopes (SHRIMP SI). Three mineral zones can be identified in the chimney: an external outer wall of porous anhydrite and colloform pyrite, an internal middle zone of sub-euhedral pyrite and massive chalcopyrite, and an inner zone of massive pyrite. The δ34SV-CDT values of the sulphides fall within the range 1.83–7.51 ‰ (avg. 4.05 ‰, n = 16), and S isotopic values increase from the core (3.09 ‰, n = 3) to the middle (3.78 ‰, n = 11) to the edge (6.99 ‰, n = 2). These results illustrate mineral crystallization processes and the mixing between seawater-derived S and magmatic–hydrothermal fluids during the growth of the chimney. The zones from the edge to the core are characterized by crystal morphologies of colloform/anhedral pyrite to massive pyrite with decreasing δ34S values, revealing multi-stage mineral deposition and sulphur isotopic fractionation. In contrast to the increase in δ34S values from the core to the edge in one profile (profile A), anomalously low δ34S values in fine-grained pyrite relative to chalcopyrite in another profile (profile B) in the middle zone result from S isotopic exchange between seawater SO42− and fluid H2S due to different fluid–seawater mixing, possibly caused by variations in permeability and porosity across the chimney.

The strength of materials exhibits size effects at sample dimensions <1 mm. In the literature, two trends are identified in the length scale spectrum: smaller is stronger at <10 µm; larger is stronger at >500 µm. The dimension at which the transition between these two trends occurs remained unclear. We study this mesoscopic scale (20–400 µm) by examining the compression response of ring and pillar-shaped Al specimens. Integrating present results with literature data, we provide Al's compression response in a “master curve” fashion. We demonstrate the inadequacies of the classical surface layer model, and suggest directions for future studies.