A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

Recent studies of viscous dissipation mechanisms in impacting droplets have revealed distinct behaviours between the macroscale and nanoscale. However, the transition of these mechanisms from the macroscale to the nanoscale remains unexplored due to limited research at the microscale. This work addresses the gap using the many-body dissipative particle dynamics (MDPD) method. While the MDPD method omits specific atomic details, it retains crucial mesoscopic effects, making it suitable for investigating the impact dynamics at the microscale. Through the analysis of velocity contours within impacting droplets, the research identifies three primary contributors to viscous dissipation during spreading: boundary-layer viscous dissipation from shear flow; rim geometric head loss; and bulk viscous dissipation caused by droplet deformation. This prompts a re-evaluation of viscous dissipation mechanisms at both the macroscale and nanoscale. It reveals that the same three kinds of dissipation are present across all scales, differing only in their relative intensities at each scale. A model of the maximum spreading factor (βmax) incorporating all forms of viscous dissipation without adjustable parameters is developed to substantiate this insight. This model is validated against three distinct datasets representing the macroscale, microscale and nanoscale, encompassing a broad spectrum of Weber numbers, Ohnesorge numbers and contact angles. The satisfactory agreement between the model predictions and the data signifies a breakthrough in establishing a universal βmax model applicable across all scales. This model demonstrates the consistent nature of viscous dissipation mechanisms across different scales and underscores the importance of integrating microscale behaviours to understand macroscale and nanoscale phenomena.

Characterised by the extensive use of obsidian, a blade-based tool inventory and microblade technology, the late Upper Palaeolithic lithic assemblages of the Changbaishan Mountains are associated with the increasingly cold climatic conditions of Marine Isotope Stage 2, yet most remain poorly dated. Here, the authors present new radiocarbon dates associated with evolving blade and microblade toolkits at Helong Dadong, north-east China. At 27 300–24 100 BP, the lower cultural layers contain some of the earliest microblade technology in north-east Asia and highlight the importance of the Changbaishan Mountains in understanding changing hunter-gatherer lifeways in this region during MIS 2.

MicroRNAs (miRNAs) are endogenous, non-coding RNAs, which are functional in a variety of biological processes through post-transcriptional regulation of gene expression. However, the role of miRNAs in the interaction between Bacillus thuringiensis and insects remains unclear. In this study, small RNA libraries were constructed for B. thuringiensis-infected (Bt) and uninfected (CK) Spodoptera exigua larvae (treated with double-distilled water) using Illumina sequencing. Utilising the miRDeep2 and Randfold, a total of 233 known and 726 novel miRNAs were identified, among which 16 up-regulated and 34 down-regulated differentially expressed (DE) miRNAs were identified compared to the CK. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis revealed that potential target genes of DE miRNAs were associated with ABC transporters, fatty acid metabolism and MAPK signalling pathway which are related to the development, reproduction and immunity. Moreover, two miRNA core genes, SeDicer1 and SeAgo1 were identified. The phylogenetic tree showed that lepidopteran Dicer1 clustered into one branch, with SeDicer1 in the position closest to Spodoptera litura Dicer1. A similar phylogenetic relationship was observed in the Ago1 protein. Expression of SeDicer1 increased at 72 h post infection (hpi) with B. thuringiensis; however, expression of SeDicer1 and SeAgo1 decreased at 96 hpi. The RNAi results showed that the knockdown of SeDicer1 directly caused the down-regulation of miRNAs and promoted the mortality of S. exigua infected by B. thuringiensis GS57. In conclusion, our study is crucial to understand the relationship between miRNAs and various biological processes caused by B. thuringiensis infection, and develop an integrated pest management strategy for S. exigua via miRNAs.

We present a high-energy, hundred-picosecond (ps) pulsed mid-ultraviolet solid-state laser at 266 nm by a direct second harmonic generation (SHG) in a barium borate (BaB2O4, BBO) nonlinear crystal. The green pump source is a 710 mJ, 330 ps pulsed laser at a wavelength of 532 nm with a repetition rate of 1 Hz. Under a green pump energy of 710 mJ, a maximum output energy of 253.3 mJ at 266 nm is achieved with 250 ps pulse duration resulting in a peak power of more than 1 GW, corresponding to an SHG conversion efficiency of 35.7% from 532 to 266 nm. The experimental data were well consistent with the theoretical prediction. To the best of our knowledge, this laser exhibits both the highest output energy and highest peak power ever achieved in a hundred-ps/ps regime at 266 nm for BBO-SHG.

This research communication aims to characterize the prevalence, molecular characterization and antimicrobial resistance profiling of Streptococcus agalactiae isolated from clinical mastitis in China. A total of 140 Strep. agalactiae isolates were identified from 12 out of 201 farms in 6 provinces, overall herd prevalence was 18.6% and the MLST analysis showed clonal complexes (CC) 103 and CC 67 were present in these herds with CC 103 predominant, accounting for 97.9%. Isolates were mostly sensitive to the tested antimicrobials: penicillin, ceftiofur, amoxi/clav, cefquinome, and vancomycin (100%), followed by cefalexin (97.9%), oxacillin (96.4%), enrofloxacin (95.7%), erythromycin (89.3%), and clindamycin (88.6%). Only 19.3 and 0.7% of isolates were sensitive to tetracycline and daptomycin, respectively, and sequence type (ST) 103 was most resistant to antimicrobials. In conclusion, CC 103 was the predominant subgroup of bovine mastitis Strep. agalactiae in China, and most antimicrobials apart from tetracycline and daptomycin were effective.

Maternal folic acid (FA) plays an important role in the fetus development, but it is unknown the response of hepatic metabolism in the offspring from different litter sizes to maternal FA supplementation. In the present study, this was done by feeding the ewes with 0, 16 and 32 mg/(kg·DM) FA supplemented diet during pregnancy and analysing the hepatic one-carbon metabolism-related indices and gene expression in the neonatal lambs of different litter sizes (twins, TW; triplets, TR). Regardless of litter sizes, the concentrations of folate, methionine, S-adenosylmethionine and DNA methyltransferase increased significantly, but homocysteine and S-adenosylhomocysteine decreased in the liver of newborn lambs from ewes whose diet was supplemented with FA. In TW, maternal FA status has little effect on hepatic genes expression profile of newborn lambs, and no significant enriched pathway was found. However, DEG involved in cell proliferation such as CCNA2, CCNB2, CCNE2, CDK1 and BUB1 were significantly enriched when the ewes were supplemented with FA in TR groups. In addition, nucleotide synthesis-related genes such as POLD1, POLD2, MCM4 and MCM5 were enriched markedly in DNA replication and pyrimidine metabolism pathways in triplets when a higher FA ingestion [32 mg/(kg·DM)] was implemented in ewes. This finding demonstrated that the hepatic methyl metabolism in TW and TR newborn lambs was regulated by maternal FA status. The hepatic cell proliferation and nucleotide metabolism related genes in TR were more susceptible to maternal dietary FA supplementation during pregnancy.

Meiosis is a highly conserved process, and is responsible for the production of haploid gametes and generation of genetic diversity. We previously identified the transferrin receptor (TFRC) in the proteome profile of mice neonatal testes, indicating the involvement of the TFRC in meiosis. However, the exact molecular role of the TFRC in meiosis remains unclear. In this study, we aimed to determine the function of the TFRC in neonatal testicular development by TFRC knockdown using the testis culture platform. Our results showed high TFRC expression in 2-week testes, corresponding to the first meiotic division. Targeting TFRC using morpholino oligonucleotides resulted in clear spermatocyte apoptosis. In addition, we used the chromosomal spread technique to show that a deficiency of TFRC caused the accumulation of leptotene and zygotene spermatocytes, and a decrease of pachytene spermatocytes, indicating early meiotic arrest. Moreover, the chromosomes of TFRC-deficient pachytene spermatocytes displayed sustained γH2AX association, as well as SYCP1/SYCP3 dissociation beyond the sex body. Therefore, our results demonstrated that the TFRC is essential for the progression of spermatocyte meiosis, particularly for DNA double-stranded break repair and chromosomal synapsis.

The inverse elasticity problem of identifying elastic modulus distribution based on measured displacement/strain fields plays a key role in various non-destructive evaluation (NDE) techniques used in geological exploration, quality control, and medical diagnosis (e.g., elastography). Conventional methods in this field are often computationally costly and cannot meet the increasing demand for real-time and high-throughput solutions for advanced manufacturing and clinical practices. Here, we propose a deep learning (DL) approach to address this challenge. By constructing representative sampling spaces of shear modulus distribution and adopting a conditional generative adversarial net, we demonstrate that the DL model can learn high-dimensional mapping between strain and modulus via training over a limited portion of the sampling space. The proposed DL approach bypasses the costly iterative solver in conventional methods and can be rapidly deployed with high accuracy, making it particularly suitable for applications such as real-time elastography and high-throughput NDE techniques.

This Research Reflection short review presents an overview of the effects of heat stress on dairy cattle udder health and discusses existing heat stress mitigation strategies for a better understanding and identification of appropriate abatement plans for future stress management. Due to high ambient temperatures with high relative humidity in summer, dairy cows respond by changes of physical, biochemical and biological pathways to neutralize heat stress resulting in decreased production performance and poorer immunity resulting in an increased incidence of intramammary infections (IMI) and a higher somatic cell count (SCC). In vitro studies on bovine polymorphonuclear cells (PMN) suggested that heat stress reduces the phagocytosis capacity and oxidative burst of PMN and alters the expression of apoptotic genes and miRNA which, together with having a negative effect on the immune system, may explain the increased susceptibility to IMI. Although there are limited data regarding the incidence rate of clinical mastitis in many countries or regions, knowledge of SCC at the cow or bulk tank level helps encourage farmers to improve herd health and to develop strategies for infection prevention and cure. Therefore, more research into bulk tank SCC and clinical mastitis rates is needed to explain the effect of heat stress on dairy cow udder health and functions that could be influenced by abatement plans.

The effects of stress-free and stress-assisted pretreatments at a relatively high temperature on the creep properties of [001] and [011] oriented Ni-based single-crystal superalloys are investigated in this article. The results show that the creep life of the pretreated samples is shorter than that of the original samples. The variation of the γ/γ′ morphology during the creep process is characterized by the microstructure period. Based on the interaction between the dislocations in the γ matrix channel and the γ′ phase, the difference in creep properties of the two oriented alloys after pretreatment is analyzed. Combined with the crystal plasticity theory and the number of activated slip systems observed in the experiments, it can be concluded that the two oriented alloys after pretreatment show obvious creep anisotropy and that the creep life increases with the number of activated slip system.

The surface energy budget over the Antarctic sea ice from 8 April 2016 through 26 November 2016 are presented. From April to October, Sensible heat flux (SH) and subsurface conductive heat flux (G) were the heat source of surface while latent heat flux (LE) and net radiation flux (Rn) were the heat sink of surface. Our results showed larger downward SH (due to the warmer air in our site) and upward LE (due to the drier air and higher wind speed in our site) compared with SHEBA data. However, the values of SH in N-ICE2015 campaign, which located at a zone with stronger winds and more advection of heat in the Arctic, were comparable to our results under clear skies. The values of aerodynamic roughness length (z0m) and scalar roughness length for temperature (z0h), being 1.9 × 10−3 m and 3.7 × 10−5 m, were suggested in this study. It is found that snow melting might increase z0m. Our results also indicate that the value of log(z0h/z0m) was related to the stability of stratification. In addition, several representative parameterization schemes for z0h have been tested and a couple of schemes were found to make a better performance.

An atmospheric pressure microwave plasma tubular furnace apparatus (MPTF) for the rapid synthesis of carbon nanotubes (CNTs) has been developed. CNTs have been synthesized by an Argon-Hydrogen microwave plasma using ethanol vapor as carbon source with the furnace temperature of 800 °C at the atmospheric pressure. The synthesized CNTs have been analyzed by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and are shown to be multi-walled and tangled and chemically connected to form a high-density network with the diameter at the range of 25-70 nm. The measurement of X-ray photoelectron spectroscopy (XPS) indicates that a large number of oxygenated functional groups grown on the surface of CNTs. These properties proved that the CNTs could be utilized as nanoscale templates for various applications.

Nickel-rich layered oxide LiNi0.8Co0.1Mn0.1O2 suffers from severe structural instability and irreversible capacity loss during cycling due to cation disorder of Li+ and Ni2+. To solve this problem, the precursor Ni0.8Co0.1Mn0.1(OH)2 and well-ordered LiNi0.8Co0.1Mn0.1O2 cathode materials were successfully synthesized via controlled crystallization and high-temperature solid-state methods. The structure, morphology, and electrochemical performance of the precursor and LiNi0.8Co0.1Mn0.1O2 powders were investigated. The results show that the precursor Ni0.8Co0.1Mn0.1(OH)2 is made of sphere-like particles composed of needle-like primary crystal and LiNi0.8Co0.1Mn0.1O2 possesses a perfect layered structure with low Li/Ni disorder. Electrochemical data demonstrate that the material rate capabilities are 203.3, 187.7, 170.4, and 163 mA h/g from 0.1C to 10C, respectively. The capacity retention is 87.9% after 100 cycles at 1C, even the cut-off voltage was increased to 4.5 V. The high discharge capacity and outstanding cycling life can be attributed to the merits of a perfect crystal lattice with low Li/Ni disorder, fast lithium ion transport, and relatively low charge transfer resistance.

Oxidative stress is closely related to metabolic disorders, which can lead to various diseases. Nuclear factor E2-related factor 2 (Nrf2) is a central regulator of oxidative stress. Sodium butyrate (NaB) has been shown to alleviate oxidative stress and insulin resistance, yet how Nrf2 is involved in the action of NaB remains unclear. In the present study, rats were rendered obese by feeding a high-fat diet for 9 weeks. NaB (300 mg/kg), which was gavaged every 2 d for 7 weeks, significantly alleviated high-fat diet-induced oxidative stress and insulin resistance. Additionally, the insulin signalling pathway in the liver was activated by NaB, associated with significant activation of Nrf2, superoxide dismutase and glutathione. Furthermore, hepatic up-regulation of Nrf2 in NaB-treated rats was associated with reduced protein content of histone deacetylase 1 and increased histone H3 acetyl K9 (H3K9Ac) modification on the Nrf2 promoter. The actions of NaB were completely abolished when Nrf2 was knocked down in vitro. Taken together, NaB acts as a histone deacetylase inhibitor to up-regulate Nrf2 expression with enhanced H3K9Ac modification on its promoter. NaB-induced Nrf2 activation stimulates transcription of downstream antioxidant enzymes, thus contributing to the amelioration of high-fat diet-induced oxidative stress and insulin resistance.