Based on monthly panel data from 2014 to 2020 and employing the staggered difference-in-differences (staggered DID) method, we examine the impact of environmental vertical management reform on data manipulation in the public sector. We reveal that environmental vertical management reform significantly reduces data manipulation in the public sector. Moderating effect analysis shows that economic growth targets weaken the inhibitory impact of this reform. Conversely, public environmental concerns could enhance the inhibitory impact of this reform on data manipulation. Mechanism analysis reveals that environmental vertical management reform works through strengthening grassroots environmental law enforcement. The increased independence of law-enforcing departments has reduced the tendency of local governments to engage in data manipulation.

We study the melting process of a solid under microgravity, driven solely by lateral vibrations that are perpendicular to the applied temperature gradient due to the absence of gravity-induced convection. Using direct numerical simulations with the phase-field method, we examine two-dimensional vibration-induced melting in a square cavity over four orders of magnitude of vibrational Rayleigh numbers, $10^5\le Ra_{{vib}}\le 10^9$. Our results show that as melting progresses, the flow structure transitions from a periodic-circulation regime with diffusion-dominated heat transfer to a columnar regime with vibroconvection. The mean height of the liquid–solid interface follows a power-law dependency with time, $\bar {\xi } \sim \tilde t^{1/(2-2\alpha )}$, where $\alpha = 0$ in the periodic-circulation regime and $\alpha = 1/2$ in the columnar regime. We further observe that within the columnar regime, the morphological evolution of the liquid–solid interface is influenced by the interaction of columnar thermal plumes in the central regions and the peripheral flow near the sidewalls. Specifically, we offer a comprehensive analysis of the plume merging behaviour, which is governed by the aspect ratio ($\bar {\xi }$) of the liquid layer and the intensity of vibration, quantified by the effective vibrational Rayleigh number $Ra_{vib}^{eff}$. We identify the relationship between the number of columnar plumes $K_m$ and $Ra_{vib}^{eff}$, finding that $K_m \sim \bar {\xi }^{-1} (Ra_{vib}^{eff})^{\gamma }$ with the fitting scaling exponent $\gamma = 0.150 \pm 0.025$. We subsequently quantify the characteristics of the interface roughness amplitude evolution in microgravity vibroconvection. Our results indicate that the roughness amplitude exhibits a power-law dependence on the mean height of the liquid layer. Drawing from the Stefan boundary condition, we theoretically deduce this dependence under the assumption of a non-uniform heat flux distribution at the interface, where the theory is corroborated by our numerical simulations.

This study investigates the flow structures and combustion regimes in an axisymmetric cavity-based scramjet combustor with a total temperature of 1800 K and a high Reynolds number of approximately 1 × 107. The hydroxyl planar laser-induced fluorescence technique, along with the broadband flame emission and CH* chemiluminescence, is employed to visualize the instantaneous flame structure in the optically accessible cavity. The jet-wake flame stabilization mode is observed, with intense heat release occurring in the jet wake upstream of the cavity. A hybrid Reynolds-averaged Navier–Stokes/large-eddy simulation approach is performed for the 0.18-equivalent-ratio case with a pressure-corrected flamelet/progress variable model. The combustion regime is identified mainly in the corrugated or wrinkled flamelet regime (approximately 102 < Da < 104, 103 < Ret < 105 where $Da$ is the Damköhler number and $Re_t$ is the turbulent Reynolds number). The combustion process is jointly dominated by supersonic combustion (which accounts for approximately 58 %) and subsonic combustion, although subsonic combustion has a higher heat release rate (peak value exceeding 1 × 109 J (m3s)−1). A partially premixed flame is observed, where the diffusion flame packages a considerable quantity of twisted premixed flame. The shockwave plays a critical role in generating vorticity by strengthening the volumetric expansion and baroclinic torque term, and it can facilitate the chemical reaction rates through the pressure and temperature surges, thereby enhancing the combustion. Combustion also shows a remarkable effect on the overall flow structures, and it drives alterations in the vorticity of the flow field. In turn, the turbulent flow facilitates the combustion and improves the flame stabilization by enhancing the reactant mixing and increasing the flame surface area.

A high-energy picosecond 355 nm ultraviolet (UV) laser operating at 100 Hz was demonstrated. A 352 mJ, 69 ps, 1064 nm laser at 100 Hz was realized firstly by cascaded regenerative, laser diode end-pumped single-pass and side-pumped main amplifiers. The stimulated Raman scattering-based beam shaping technique, thermally induced birefringence compensation and 4f spatial filter-image relaying systems were used to maintain a relatively homogeneous beam intensity distribution during the amplification process. By using lithium triborate crystals for second- and third-harmonic generation (THG), a 172 mJ, approximately 56 ps, 355 nm UV laser was achieved with a THG conversion efficiency of 49%. To the best of our knowledge, it is the highest pulse energy of a picosecond 355 nm UV laser so far. The beam quality factor ${M}^2$ and pulse energy stability were ${M}_x^2$=3.92, ${M}_y^2$=3.71 and root mean square of 1.48%@3 hours. This laser system could play significant roles in applications including photoconductive switch excitation, laser drilling and laser micro-fabrication.

We report the unified constitutive law of vibroconvective turbulence in microgravity, i.e. $Nu \sim a^{-1} Re_{os}^\beta$ where the Nusselt number $Nu$ measures the global heat transport, $a$ is the dimensionless vibration amplitude, $Re_{os}$ is the oscillational Reynolds number and $\beta$ is the universal exponent. We find that the dynamics of boundary layers plays an essential role in vibroconvective heat transport and the $Nu$-scaling exponent $\beta$ is determined by the competition between the thermal boundary layer (TBL) and vibration-induced oscillating boundary layer (OBL). Then a physical model is proposed to explain the change of scaling exponent from $\beta =2$ in the TBL-dominant regime to $\beta = 4/3$ in the OBL-dominant regime. Our finding elucidates the emergence of universal constitutive laws in vibroconvective turbulence, and opens up a new avenue for generating a controllable effective heat transport under microgravity or even microfluidic environment in which the gravity effect is nearly absent.

The Wood Snipe Gallinago nemoricola is one of the least known shorebird species, and its habitat associations are very poorly understood. Here we provide the first assessment of the habitat use of the Wood Snipe during the breeding season. Between May and July 2021 at a 4-km2 alpine meadow in Sichuan province, China, we conducted population surveys and behavioural observations to identify sites where breeding Wood Snipe occurred and foraged. We quantified the habitat characteristics and food resource availability of these sites and compared them with randomly selected “background” sites. Comparison between 34 occurrence sites and 25 background sites indicated that during the breeding season, Wood Snipes are not distributed evenly across alpine meadow habitats, but preferred habitats in the lower part (3,378–3,624 m) of the alpine meadow with intermediate levels of soil moisture. In addition, comparison between 17 foraging sites and 24 background sites showed that the Wood Snipe tended to forage at sites with higher soil fauna abundance. We found weak evidence for denser vegetation cover at its height and no evidence for other biotic habitat variables such as vegetation composition or other abiotic habitat variables such as slope, soil penetrability, or disturbance level to influence Wood Snipe habitat associations. Our results suggest that the actual distribution range of the Wood Snipe during the breeding season may be smaller than expected from the extent of apparently suitable habitat. We advise caution in evaluating the potential habitat availability and distribution of the Wood Snipe, and call for further research to better understand the ecology of this rare species to inform its conservation.

A growing number of Chinese firms motivate their employees through employee stock ownership plans (ESOPs). Using a sample of listed firms in China, this paper examines the impact of ESOPs on firms’ total factor productivity (TFP), as well as the mechanisms of ESOPs. The empirical results show that ESOPs have a positive impact on firm TFP. The mechanism tests convey that ESOPs increase firm TFP by promoting research and development (R&D) investment and mitigating agency costs. These results are robust after accounting for endogeneity and using alternative metrics of TFP. In addition, we find that the positive effect of ESOPs on firm TFP is more pronounced in non-state-owned firms and firms with a less severe free-riding problem. Furthermore, the effect on firm TFP is positively associated with the subscription proportion of non-executive employees in ESOPs. Overall, the results of this study underscore the important role of employee ownership in firms’ productivity improvement.

This study compares Chinese people’s trust and trustworthiness, risk attitude, and time preference before and after the onset of the COVID-19 pandemic in China. We compare the preferences of subjects in two online experiments with samples drawn from 31 provinces across mainland China before and after the onset of the pandemic. We test two competing hypotheses regarding trust and trustworthiness. On the one hand, the outbreak as a collective threat could enhance in-group cohesion and cooperation and thus increase trust and trustworthiness. On the other hand, to the extent that people expect their future income to decline, they may become more self-protective and self-controlled, and thus less trusting and trustworthy and more risk averse and patient. Comparing before and after the onset, we found that the subjects increased in trustworthiness. After the onset, trust and trustworthiness (and risk aversion and present bias too) were positively correlated with the COVID-19 prevalence rate in the provinces. Subjects with more pessimistic expectations about income change showed more risk aversion and lower discount rates, supporting the speculation concerning self-control.

This study is designed to explore the association between dietary betaine intake and risk of all-cause and cardiovascular death in patients with coronary artery diseases (CAD). In this cohort study, 1292 patients with CAD were followed up for a median of 9·2 years. Baseline dietary betaine intake was collected using a paper-based semi-quantitative FFQ and assessed according to the US Department of Agriculture (USDA) database and the data of betaine in common foods. Cox proportional hazards regression models were used to analyse the association between dietary betaine intake and risks of all-cause and cardiovascular mortality. During the follow-up periods, 259 deaths recorded in 1292 participants, of which 167 died of CVD. Patients in the highest tertile of dietary betaine intake had a lower risk of all-cause (P = 0·007) and cardiovascular death (P < 0·001) than those in the lowest tertile after adjusting for age and sex, traditional cardiovascular risk factors and other potential confounders. After further adjusting for plasma methionine metabolites and vitamins, hazard ratio across tertiles of dietary betaine intake were 1·00, 0·84 and 0·72 for all-cause mortality (P for trend = 0·124), and 1·00, 0·77 and 0·55 for cardiovascular mortality (P for trend = 0·021). Higher dietary betaine intake was associated with a decreased risk of cardiovascular death after fully adjustment for cardiovascular risk factors, other potential confounders and plasma methionine metabolites and vitamins. However, the association between dietary betaine intake and risk of all-cause mortality was not statistically significant after further adjusting for plasma methionine metabolites and vitamins.

Obesity and alcohol consumption are both important modifiable risk factors for cancer. We examined the joint association of adiposity and alcohol consumption with alcohol- and obesity-related cancer incidence. This prospective cohort study included cancer-free UK Biobank participants aged 40–69 years. Alcohol consumption was categorised based on current UK guidelines into four groups. We defined three markers of adiposity: body fat percentage (BF %), waist circumference and BMI and categorised each into three groups. We derived a joint alcohol consumption and adiposity marker variable with twelve mutually exclusive categories. Among 399 575 participants, 17 617 developed alcohol-related cancer and 20 214 developed obesity-related cancer over an average follow-up of 11·8 (SD 0·9) years. We found relatively weak evidence of independent associations of alcohol consumption with cancer outcomes. However, the joint association analyses showed that across all adiposity markers, above guideline drinkers who were in the top two adiposity groups had elevated cancer incidence risk (e.g. HR for alcohol-related cancer was 1·53 (95 % CI (1·24, 1·90)) for within guideline drinkers and 1·61 (95 % CI (1·30, 2·00)) for above guideline drinkers among participants who were in the top tertile BF %. Regardless of alcohol consumption status, the risk of obesity-related cancer increased with higher adiposity in a dose–response manner within alcohol consumption categories. Our study provides guidance for public health priorities aimed at lowering population cancer risk via two key modifiable risk factors.

In dynamic outdoor environments characterized by turbulent airflow and intermittent odor plumes, robotic odor plume tracking remains challenging, because existing algorithms heavily rely on manually tuning or learning from expert experience, which are hard to implement in an unknown environment. In this paper, a multi-continuous-output Takagi–Sugeno–Kang fuzzy system was designed and tuned with reinforcement learning to solve the robotic odor source localization problem in dynamic odor plumes. Based on the Lévy Taxis plume tracking controller, the proposed fuzzy system determined the parameters of the controller based on the robot’s observation and guided the robot to turn and move towards the odor source at each searching step. The trained fuzzy system was tested in simulated filament-based odor plumes dispersed by a changing wind field. The results showed that the performance of the proposed fuzzy system-based controller trained with reinforcement learning can achieve a similar success rate and higher efficiency compared with a manually tuned and well-designed fuzzy system-based controller. The fuzzy system-based plume tracking controller was also validated through real robotic experiments.

High-Mg andesites (HMAs) are crucial for the reconstruction of plate tectonics, continental margin formation and lithospheric evolution. In this study, we present new fossil age, whole-rock geochemical and Sr–Nd isotope data on the newly discovered Dundunshan Group HMAs in the Dundunshan area of the Beishan orogen (central-southern Central Asian Orogenic Belt). The Dundunshan HMA samples are characterized by high MgO (6.47–7.02 wt%) contents and high Mg# values (67.27–68.77), with SiO2 (58.57–62.13 wt%), Al2O3 (14.49–16.07 wt%) and CaO (5.05–6.24 wt%) resembling typical HMAs. The Dundunshan HMA samples are calc-alkaline and strongly enriched in light rare earth elements (LREEs) and large-ion lithophile elements (LILEs), with slightly negative Eu anomaly and high-field-strength element (HFSE) depletions. Their (87Sr/86Sr)i ratios (0.7041–0.7057) and ϵNd(t) (3.73–5.59) indicate that the Dundunshan HMAs were mainly formed by the interactions between subducted oceanic sediment-derived melts and mantle peridotites. Fossil evidence and published radiometric age data constrain the formation of the Dundunshan HMAs to early Late Devonian time. Sedimentological features of the Middle Devonian Sangejing Formation and regional tectonic correlation suggest that the Hongliuhe–Niujuanzi–Xichangjing Ocean in the Dundunshan area was likely closed during late Middle Devonian time, and that the Dundunshan HMAs were formed in a post-collision extensional setting.

The orogenic process and crustal growth of the Changning–Menglian Palaeo-Tethys orogenic belt in the southeastern Tibetan Plateau is not fully understood. Triassic Caojian rhyolites and granites occur extensively in this orogenic belt and represent important constraints for this issue. This study aims to examine the relationships between the Triassic Caojian rhyolites and granites and to gain a better understanding of their possible petrogenesis. The study used zircon U–Pb geochronology, trace element analyses and Sr–Nd–Hf isotope data to better understand the relationships and possible origin of the rhyolites and granites. Recent zircon U–Pb ages indicated that the Caojian rhyolites were emplaced at 227.2 Ma, whereas age estimates for Caojian granites were slightly older (233.4–236.9 Ma). The Caojian rhyolites are enriched in large-ion lithophile elements and high-field-strength elements, with elevated FeOtot/MgO and Ga/Al ratios. However, they are significantly depleted in Ba, Sr, Eu, P and Ti. These geochemical characteristics indicate that they have an A-type affinity. Furthermore, the Caojian granites comprise biotite monzogranites and granodiorites and show unfractionated composition. Mineralogically, the Caojian granites were found to contain diagnostic I-type minerals such as hornblende. Geochemical data suggest that the petrogenesis of the Triassic Caojian rhyolites is characterized by rejuvenation of crystal mush represented by the Triassic Caojian granites. The necessary thermal input was supplied by mafic magma. This magmatic evolution was likely related to lithospheric delamination and upwelling of the asthenosphere during the Mid- to Late Triassic, forming post-collisional I-type granites and A-type volcanics in the Changning–Menglian Palaeo-Tethys orogenic belt.

Nutritional Risk Screening index is a standard tool to assess nutritional risk, but epidemiological data are scarce on controlling nutritional status (CONUT) as a prognostic marker in acute haemorrhagic stroke (AHS). We aimed to explore whether the CONUT may predict a 3-month functional outcome in AHS. In total, 349 Chinese patients with incident AHS were consecutively recruited, and their malnutrition risks were determined using a high CONUT score of ≥ 2. The cohort patients were divided into high-CONUT (≥ 2) and low-CONUT (< 2) groups, and primary outcomes were a poor functional prognosis defined as the modified Rankin Scale (mRS) score of ≥ 3 at post-discharge for 3 months. Odds ratios (OR) with 95 % confidence intervals (CI) for the poor functional prognosis at post-discharge were estimated by using a logistic analysis with additional adjustments for unbalanced variables between the high-CONUT and low-CONUT groups. A total of 328 patients (60·38 ± 12·83 years; 66·77 % male) completed the mRS assessment at post-discharge for 3 months, with 172 patients at malnutrition risk at admission and 104 patients with a poor prognosis. The levels of total cholesterol and total lymphocyte counts were significantly lower in high-CONUT patients than low-CONUT patients (P = 0·012 and < 0·001, respectively). At 3-month post discharge, there was a greater risk for the poor outcome in the high-CONUT compared with the low-CONUT patients at admission (OR: 2·32, 95 % CI: 1·28, 4·17). High-CONUT scores independently predict a 3-month poor prognosis in AHS, which helps to identify those who need additional nutritional managements.

The effect of vitamin D (VD) on the risk of preeclampsia (PE) is uncertain. Few of previous studies focused on the relationship between dietary VD intake and PE risk. Therefore, we conducted this 1:1 matched case–control study to explore the association of dietary VD intake and serum VD concentrations with PE risk in Chinese pregnant women. A total of 440 pairs of participants were recruited during March 2016 to June 2019. Dietary information was obtained using a seventy-eight-item semi-quantitative FFQ. Serum concentrations of 25(OH)D2 and 25(OH)D3 were measured by liquid chromatography–tandem MS. Multivariate conditional logistic regression was used to estimate OR and 95 % CI. Restricted cubic splines (RCS) were plotted to evaluate the dose–response relationship of dietary VD intake and serum VD concentrations with PE risk. Compared with the lowest quartile, the OR of the highest quartile were 0·45 (95 % CI 0·29, 0·71, Ptrend = 0·001) for VD dietary intake and 0·26 (95 % CI 0·11, 0·60, Ptrend = 0·003) for serum levels after adjusting for confounders. In addition, the RCS analysis suggested a reverse J-shaped relationship between dietary VD intake and PE risk (P-nonlinearity = 0·02). A similar association was also found between serum concentrations of total 25(OH)D and PE risk (P-nonlinearity = 0·02). In conclusion, this study provides evidence that higher dietary intake and serum levels of VD are associated with the lower risk of PE in Chinese pregnant women.

Spatial profiles of impurity emission measurements in the extreme ultraviolet (EUV) spectroscopic range in radiofrequency (RF)-heated discharges are combined with one-dimensional and three-dimensional transport simulations to study the effects of resonant magnetic perturbations (RMPs) on core impurity accumulation at EAST. The amount of impurity line emission mitigation by RMPs appears to be correlated with the ion Z for lithium, carbon, iron and tungsten monitored, i.e. stronger suppression of accumulation for heavier ions. The targeted effect on the most detrimental high-Z impurities suggests a possible advantage using RMPs for impurity control. Profiles of transport coefficients are calculated with the STRAHL one-dimensional impurity transport code, keeping $\nu /D$ fixed and using the measured spatial profiles of $\textrm{F}{\textrm{e}^{20 + }}$, $\textrm{F}{\textrm{e}^{21 + }}$ and $\textrm{F}{\textrm{e}^{22 + }}$ to disentangle the transport coefficients. The iron diffusion coefficient ${D_{\textrm{Fe}}}$ increases from $1.0- 2.0\;{\textrm{m}^2}\;{\textrm{s}^{ - 1}}$ to $1.5- 3.0\;{\textrm{m}^2}\;{\textrm{s}^{ - 1}}$ from the core region to the edge region $(\rho \gt 0.5)$ after the onset of RMPs. Meanwhile, an inward pinch of iron convective velocity ${\nu _{\textrm{Fe}}}$ decreases in magnitude in the inner core region and increases significantly in the outer confined region, simultaneously contributing to preserving centrally peaked $\textrm{Fe}$ profiles and exhausting the impurities. The ${D_{\textrm{Fe}}}$ and ${\nu _{\textrm{Fe}}}$ variations lead to reduced impurity contents in the plasma. The three-dimensional edge impurity transport code EMC3-EIRENE was also applied for a case of RMP-mitigated high-Z accumulation at EAST and compared to that of low-Z carbon. The exhaust of ${\textrm{C}^{6 + }}$ toward the scrape-off layer accompanying an overall suppression of heavier ${\textrm{W}^{30 + }}$ is observed when using RMPs.