A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

The nitrogen-decorated CeO2/reduced graphene oxide nanocomposite (CeO2/N-rGO) was one-step synthesized by a facile hydrothermal technique and applied as counter electrode materials for dye-sensitized solar cells (DSSCs). For comparison, CeO2/rGO and rGO were also synthesized by adjusting corresponding reactants. It was found that the as-synthesized CeO2/N-rGO shows better electrocatalytic activity for triiodide/iodide reduction than that of pure rGO and CeO2/rGO, and a synergistic effect of nitrogen and CeO2 on the rGO sheets was observed. The photoelectric conversion efficiency of DSSCs based on CeO2/N-rGO counter electrode was 3.20%, which is higher than that of CeO2/rGO (2.45%) and rGO counter electrode (1.37%). Furthermore, the synergistic effect of nitrogen and CeO2 on the rGO sheets was also discussed in detail with different CeO2 amount levels. It is believed that this one-step synthetic method is a potential way to synthesize low-cost and efficient rGO-based multiple composited counter electrode materials to replace more expensive Pt.

Treatment of liver fibrosis is very limited as there is currently no effective anti-fibrotic therapy. Spirulina platensis (SP) is a blue-green alga that is widely supplemented in healthy foods. The objective of this study was to determine whether SP supplementation can prevent obesity-induced liver fibrosis in vivo. Male C57BL/6J mice were randomly assigned to a low-fat or a high-fat (HF)/high-sucrose/high-cholesterol diet or an HF diet supplemented with 2·5 % SP (w/w) (HF/SP) for 16 or 20 weeks. There were no significant differences in body weight, activity, energy expenditure, serum lipids or glucose tolerance between mice on HF and HF/SP diets. However, plasma alanine aminotransferase level was significantly reduced by SP at 16 weeks. Expression of fibrotic markers and trichrome stains showed no differences between HF and HF/SP. Splenocytes isolated from HF/SP fed mice had lower inflammatory gene expression and cytokine secretion compared with splenocytes from HF-fed mice. SP supplementation did not attenuate HF-induced liver fibrosis. However, the expression and secretion of inflammatory genes in splenocytes were significantly reduced by SP supplementation, demonstrating the anti-inflammatory effects of SP in vivo. Although SP did not show appreciable effect on the prevention of liver fibrosis in this mouse model, it may be beneficial for other inflammatory conditions.

The Chinese National Antarctic Research Expedition (GHINARE) carried out three traverses from Zhongshan station to Dome A, Princess Elizabeth Land and Inaccessible Area, East Antarctic ice sheet, during the 1996/97 to 1998/99 Antarctic field seasons. The expeditions are part of the Chinese International Trans-Antarctic Scientific Expedition program. In this project, glaciological investigations of mass balance, ice temperature, ice flow, stratigraphy in snow pits and snow/firn ice cores, as well as the glaciochemical study of surface snow and shallow ice cores, have been carried out. In the 1998/99 field season, CHINARE extended the traverse route to 1128 km inland from Zhongshan station. The density profiles show that firnification over Princess Elizabeth Land and Inaccessible Area (290–1100 km along the route) is fairly slow, and the accumulation rate recovered from snow pits along the initial 460 km of the route is 4.6–21 cm (46–210 kg m–2a–1 ) water equivalent. The initial 460 km of the route can be divided into four sections based on the differences of accumulation rate. This pattern approximately coincides with the study on the Lambert Glacier basin (LGB) by Australian scientists. During the past 50 years, the trends of both air temperature and accumulation rate show a slight increase in this area, in contrast to the west side of the LGB. Data on surface accumulation rates and their spatial and temporal variability over ice-drainage areas such as the LGB are essential for precise mass-balance calculation of the whole ice sheet, and are important for driving ice-sheet models and testing atmospheric models.

An updated compilation of published and new data of major-ion (Ca, Cl, K, Mg, Na, NO3, SO4) and methylsulfonate (MS) concentrations in snow from 520 Antarctic sites is provided by the national ITASE (International Trans-Antarctic Scientific Expedition) programmes of Australia, Brazil, China, Germany, Italy, Japan, Korea, New Zealand, Norway, the United Kingdom, the United States and the national Antarctic programme of Finland. The comparison shows that snow chemistry concentrations vary by up to four orders of magnitude across Antarctica and exhibit distinct geographical patterns. The Antarctic-wide comparison of glaciochemical records provides a unique opportunity to improve our understanding of the fundamental factors that ultimately control the chemistry of snow or ice samples. This paper aims to initiate data compilation and administration in order to provide a framework for facilitation of Antarctic-wide snow chemistry discussions across all ITASE nations and other contributing groups. The data are made available through the ITASE web page (http://www2.umaine.edu/itase/content/syngroups/snowchem.html) and will be updated with new data as they are provided. In addition, recommendations for future research efforts are summarized.

Despite their importance in the formation and evolution of stellar clusters and galaxies, the formation of high-mass stars remains poorly understood. We recently started a systematic observational study of the 22 GHz water and 44 GHz class I methanol masers in high-mass star-forming regions as a four-year KaVA large program. Our sample consists of 87 high-mass young stellar objects (HM-YSOs) in various evolutionary phases, many of which are associated with two or more different maser species. The primary scientific goals are to measure the spatial distributions and 3-dimensional velocity fields of multiple maser species, and understand the dynamical evolution of HM-YSOs and their circumstellar structures, in conjunction with follow-up observations with JVN/EAVN (6.7 GHz class II methanol masers), VERA, and ALMA. In this paper we present details of our KaVA large program, including the first-year results and observing/data analysis plans for the second year and beyond.

We examined the in vitro developmental competence of parthenogenetic activation (PA) oocytes activated by an electric pulse (EP) and treated with various concentrations of AZD5438 for 4 h. Treatment with 10 µM AZD5438 for 4 h significantly improved the blastocyst formation rate of PA oocytes in comparison with 0, 20, or 50 µM AZD5438 treatment (46.4% vs. 34.5%, 32.3%, and 24.0%, respectively; P < 0.05). The blastocyst formation rate was higher in the group treated with AZD5438 for 4 h than in the groups treated with AZD5438 for 2 or 6 h (42.8% vs. 38.6% and 37.2%, respectively; P > 0.05). Furthermore, 66.67% of blastocysts derived from these AZD5438-treated PA oocytes had a diploid karyotype. The blastocyst formation rate of PA and somatic cell nuclear transfer (SCNT) embryos was similar between oocytes activated by an EP and treated with 2 mM 6-dimethylaminopurine for 4 h and those activated by an EP and treated with 10 µM AZD5438 for 4 h (11.11% vs. 13.40%, P > 0.05). In addition, the level of maturation-promoting factor (MPF) was significantly decreased in oocytes activated by an EP and treated with 10 µM AZD5438 for 4 h. Finally, the mRNA expression levels of apoptosis-related genes (Bax and Bcl-2) and pluripotency-related genes (Oct4, Nanog, and Sox2) were checked by RT-PCR; however, there were no differences between the AZD5438-treated and non-treated control groups. Our results demonstrate that porcine oocyte activation via an EP in combination with AZD5438 treatment can lead to a high blastocyst formation rate in PA and SCNT experiments.

Blackberry is a fruiting berry species with very high nutrient contents. With the recent increasing consumer demand for blackberries, new sources of germplasm and breeding techniques are required to improve blackberry production. This study was carried out to evaluate the genetic diversity (GD) and relationship among 55 blackberry (Rubus fruticosus) mutants derived from γ-ray treatment (52 lines) and N-methyl-N′-nitrosourea (MNU) treatment (three lines) using an inter-simple sequence repeat marker. A total of 18 bands were amplified with an average of 3.6 bands per primer. Among them, eight bands were identified to be polymorphic with a rate of 44.4%. In addition, the GD information content values were highest in the 60 Gy treatment population and the GD values were higher in the γ-ray treatment populations than in the MNU treatment population. According to a cluster analysis, all the mutant lines can be classified into five categories, and the genetic distance was greatest between the 80 Gy-irradiated population and other populations. These results indicate that mutant lines have high GD and can be effectively utilized for improving blackberry breeding.

Mutation breeding techniques have been used to induce new genetic variations and improve agronomic traits in soybean. In Korea, the Korea Atomic Energy Research Institute (KAERI) has unique radiation facilities to induce plant mutations and has been conducting soybean mutation breeding programmes since the mid-1960s. Until now, the KAERI has developed five soybean mutant cultivars exhibiting early maturity, high yield and seed-coat colour change. In this paper, we review these five mutant cultivars in terms of how to successfully induce unique agronomic characteristics through mutation breeding programmes. A number of induced mutants exhibiting null lipoxygenase enzymes, altered protein patterns or Kunitz trypsin inhibitor activity could serve as genetic resources for the genetic analysis of target genes, and one mutant population has been developed for a reverse genetic study.

The effects of polymer substrates on the interfacial structure and the thermal stability of Ga-doped ZnO (GZO) thin films were investigated. The GZO thin films were deposited on polyethylene terephthalate (PET) and polyethylene naphthalate (PEN) substrates by rf-magnetron sputtering at room temperature, and thermal stability tests of the GZO thin films on the polymer substrates were performed at 150°C up to 8 h in air. Electrical and structural characterizations of the GZO thin films on the PET and the PEN substrates were carried out, and the origins of the stable interfacial structure and the improved thermal stability of the GZO thin film on the PEN substrate were discussed.

By chemical vapor deposition, aligned single wall carbon nanotubes (SWNTs) and a network of SWNTs are simultaneously grown as the channel and the source–drain electrodes of thin film transistors (TFTs). The increase of aligned SWNTs increases the channel conductance without changing the contact resistance. However, the increase of network-type SWNTs from 19 to 32.5 (SWNTs/μm) decreases the contact resistance fivefold. The contact resistance of all-SWNT TFT is three times lower compared with that of an SWNT TFT using metal electrodes. The all-SWNT TFTs transferred on polyethylene terephthalate (PET) show a transparency of >80% in the visible range of wavelengths.

Using immunostaining methodology, we traced the axonal projection of FMRFamide (Phe-Met-Arg-Phe-NH2)-like immunoreactive (LI) medial neurosecretory cells (MNCs) and lateral neurosecretory cells (LNCs) from the brain into the ventral nerve cord (VNC) and retrocerebral complex in Bombyx mori (L.) (Lepidoptera: Bombycidae). Of the seven pairs of FMRFamide-LI MNCs, one pair extended its axons from the brain pars intercerebralis into the VNC ipsilateral connective where they appeared to terminate. The axons of the remaining MNCs ran through decussation in the brain median region and contralateral nervi corporis cardiaci (NCC) I out of the brain, and eventually innervated the contralateral corpus cardiacum (CC). Axons from the single pair of FMRFamide-LI LNCs projected into the ipsilateral NCC II fused with NCC I without decussation in the brain, and finally terminated in the CC. These results suggest that transport of the FMRFamide-like neuropeptide from may be related to the modulation of functions such as gut contraction in MNCs terminating in the VNC, and regulation of production and/or secretion of specific hormones such as juvenile hormone in MNCs and LNCs terminating in the CC.

The successful synthesis of ZnS hollow microspheres by a solvothermal route is reported. The synthesis was achieved by a proper selection of a sulfur source, i.e., Na2S2O3⋅5H2O or (NH2)2CS, to react with Zn(CH3COO)2⋅2H2O in mixed solvents of ethylene glycol and deionized water. The ZnS products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence spectroscopy. XRD identified the ZnS products to have either zinc blende or wurtzite structure. SEM images revealed hollow ZnS microspheres with 1 to 2 μm diameters and 100 to 200 nm shell thicknesses. TEM images confirmed that the hollow ZnS microspheres were assembled by ZnS crystalline nanocrystallites. The room-temperature photoluminescence spectrum of the zinc blende hollow microspheres showed a strong green emission at 514 nm and weak emission at 379 nm.

The continual miniaturization of microprocessors has resulted in increased RC delay and cross talk noise. To solve these problems ultralow nanoporous dielectric materials are required but have not developed yet. To develop ultralow dielectric materials with required mechanical and dielectrical properties for next generation semiconductors, it is essential to control the pore size in nm range and its morphology by preventing porogen aggregation. Thus we have used ozone treatment during thermal curing process of the nanoporous dielectrics in order to increase the reactivity between the matrix and reactive porogens and to possibly induced changes in Si bond structures.

Ozone treatment was quite effective in enhancing the reactivity of the low-k matrix and the reactive porogen, which converted effectively the alkoxy or alkyl groups into Si-OH groups, which mostly converted to the formation of Si-O-Si network structures. Therefore, ozone treatment greatly increased modulus up to 11.25 GPa at the same porogen loading (60 vol%). The modulus increased by more than 23% compared with non-treated samples (9.1 GPa). The porosity of the ozone-treated sample reduced to 19.3 vol% at the same porogen loading. Solid state Si-NMR showed that less porosity was related to the breakage of methyl groups in the matrix by ozone irradiation, which also resulted in a little sacrificed dielectric constant.

In general, the mechanical properties of nanoporous dielectrics deteriorate sharply above certain high porosity ca. 15 ~20 vol% due to non-uniform distribution of nanopores, their aggregation and resultant open pores. Therefore, this result may suggest the possibility of increasing mechanical properties of nanoporous dielectrics. However, we need to experimentally control processing variables such as irradiation time, intensity, temperature and so forth in order to optimize both mechanical and dielectrical properties.

The sap of Acer mono has been called ‘bone-benefit-water’ in Korea because of its mineral and sugar content. In particular, the calcium concentration of the sap of A. mono is 37·5 times higher than commercial spring water. In the current study, we examined whether A. mono sap could improve or prevent osteoporosis-like symptoms in a mouse model. Male mice (3 weeks old) were fed a low-calcium diet supplemented with 25, 50 or 100 % A. mono sap, commercial spring water or a high calcium-containing solution as a beverage for 7 weeks. There were no differences in weekly weight gain and food intake among all the groups. Mice that were given a low-calcium diet supplemented with commercial spring water developed osteoporosis-like symptoms. To assess the effect of sap on osteoporosis-like symptoms, we examined serum calcium concentration, and femur density and length, and carried out a histological examination. Serum calcium levels were significantly lower in mice that received a low-calcium diet supplemented with commercial spring water (the negative control group), and in the 25 % sap group compared to mice fed a normal diet, but were normal in the 50 and 100 % sap and high-calcium solution groups. Femur density and length were significantly reduced in the negative control and 25 % sap groups. These results indicate that a 50 % sap solution can mitigate osteoporosis-like symptoms induced by a low-calcium diet. We also examined the regulation of expression of calcium-processing genes in the duodenum and kidney. Duodenal TRPV6 and renal calbindin-D9k were up-regulated dose-dependently by sap, and the levels of these factors were higher than those attained in the spring water-treated control. The results demonstrate that the sap of A. mono ameliorates the low bone density induced by a low-calcium diet, most likely by increasing calcium ion absorption.

The hydrophobicity of poly Si is reported to introduce different polishing behavior with careful control of post CMP cleaning process. The purpose of this study was to investigate the effect of poly Si wettability on its CMP behavior. The adhesion force of polymeric particle on the poly Si wafer surfaces was measured in the KOH solution (pH 11) as a function of solution A concentration. Adhesion force decreased and saturated as a function of concentration of solution A. The change of surface wettability affects not only the polishing rates but also the level of contamination on wafer because the interactions between particles and substrates are dependent on the wettability of the surface. Also, hydrophobic poly Si surfaces attracted much more pad particles with water marks than hydrophilic