Asian corn borer, Ostrinia furnacalis Guenée (Lepidoptera: Crambidae), is a major pest in corn production, and its management remains a significant challenge. Current control methods, which rely heavily on synthetic chemical pesticides, are environmentally detrimental and unsustainable, necessitating the development of eco-friendly alternatives. This study investigates the potential of the entomopathogenic nematode Steinernema carpocapsae as a biological control agent for O. furnacalis pupae, focusing on its infection efficacy and the factors influencing its performance. We conducted a series of laboratory experiments to evaluate the effects of distance, pupal developmental stage, soil depth, and light conditions on nematode attraction, pupal mortality and sublethal impacts on pupal longevity and oviposition. Results demonstrated that S. carpocapsae exhibited the highest attraction to pupae at a 3 cm distance, with infection declining significantly at greater distances. Younger pupae (<12 h old), were more attractive to nematodes than older pupae, and female pupae were preferred over males. Nematode infection was highest on the head and thorax of pupae, with a significant reduction in infection observed after 24 h. Infection caused 100% mortality in pupae within 2 cm soil depth, though efficacy was reduced under light conditions. Sublethal effects included a significant reduction in the longevity of infected adults and a decrease in the number of eggs laid by infected females compared to controls. These findings underscore the potential of S. carpocapsae as an effective biocontrol agent for sustainable pest management in corn production, offering a viable alternative to chemical pesticides.

Palygorskite (Pal) shows great potential for physical, chemical and biological uses due to its colloidal, catalytic and adsorption properties. Pal mines, however, are facing the challenge of low-grade materials (5–15%), making it difficult to use Pal in emerging fields such as new materials, environmental protection and health. Therefore, there is an urgent need to develop an efficient method for separating and purifying Pal to obtain high purity levels. Hence, we have developed a dispersant-assisted rotating liquid film reactor separation strategy based on sodium hexametaphosphate as the dispersant. This strategy utilizes the double electron layer of Pal and the density difference between impurities to achieve effective disaggregation and purification of Pal bundles through the promotion of repulsive driving effects. Under optimal conditions, the purity of Pal can be increased from less than 10% to over 80%. This research presents a novel approach to the efficient refining of low-grade Pal. The crudely purified Pal’s adsorption capacity for methylene blue increased from 84.2 to 256.4 mg g–1.

X-ray frequency combs (XFCs) are of great interest in many scientific research areas. In this study, we investigate the generation of high-power tunable XFCs at the Shanghai soft X-ray Free-Electron Laser facility (SXFEL). To achieve this, a chirped frequency-beating laser is employed as the seed laser for echo-enabled harmonic generation of free-electron lasers. This approach enables the formation of an initial bunching of combs and ultimately facilitates the generation of XFCs under optimized conditions. We provide an optical design for the chirped frequency-beating seed laser system and outline a method to optimize and set the key parameters that meets the critical requirements for generating continuously tunable XFCs. Three-dimensional simulations using realistic parameters of the SXFEL demonstrate that it is possible to produce XFCs with peak power reaching 1.5 GW, central photon energy at the carbon K edge (~284 eV) and tunable repetition frequencies ranging from 7 to 12 THz. Our proposal opens up new possibilities for resonant inelastic X-ray scattering experiments at X-ray free-electron laser facilities.

The spatio-temporal scales, as well as a comprehensive self-sustained mechanism of the reattachment unsteadiness in shock wave/boundary layer interaction, are investigated in this study. Direct numerical simulations reveal that the reattachment unsteadiness of a Mach 7.7 laminar inflow causes over $26\,\%$ variation in wall friction and up to $20\,\%$ fluctuation in heat flux at the reattachment of the separation bubble. A statistical approach, based on the local reattachment upstream movement, is proposed to identify the spanwise and temporal scales of reattachment unsteadiness. It is found that two different types, i.e. self-induced and random processes, dominate different regions of reattachment. A self-sustained mechanism is proposed to comprehend the reattachment unsteadiness in the self-induced region. The intrinsic instability of the separation bubble transports vorticity downstream, resulting in an inhomogeneous reattachment line, which gives rise to baroclinic production of quasi-streamwise vortices. The pairing of these vortices initiates high-speed streaks and shifts the reattachment line upstream. Ultimately, viscosity dissipates the vortices, triggering instability and a new cycle of reattachment unsteadiness. The temporal scale and maximum vorticity are estimated with the self-sustained mechanism via order-of-magnitude analysis of the enstrophy. The advection speed of friction, derived from the assumption of coherent structures advecting with a Blasius-type boundary layer, aligns with the numerical findings.

In view of the fact that the current research on active and passive rehabilitation training of lower limbs is mainly based on the analysis of exoskeleton prototype and the lack of analysis of the actual movement law of limbs, the human-machine coupling dynamic characteristics for active rehabilitation training of lower limbs are studied. In this paper, the forward and inverse kinematics are solved on the basis of innovatively integrating the lower limb and rehabilitation prototype into a human-machine integration system and equivalent to a five-bar mechanism. According to the constraint relationship of hip joint, knee joint and ankle joint, the Lagrange dynamic equation and simulation model of five-bar mechanism under the constraint of human physiological joint motion are constructed, and the simulation problem of closed-loop five-bar mechanism is solved. The joint angle experimental system was built to carry out rehabilitation training experiments to analyze the relationship between lower limb error and height, weight and BMI, and then, a personalized training planning method suitable for people with different lower limb sizes was proposed. The reliability of the method is proved by experiments. Therefore, we can obtain the law of limb movement on the basis of traditional rehabilitation training, appropriately reduce the training speed or reduce the man-machine position distance and reduce the training speed or increase the man-machine distance to reduce the error to obtain the range of motion angle closer to the theory of hip joint and knee joint respectively, so as to achieve better rehabilitation.

Fast neutron absorption spectroscopy is widely used in the study of nuclear structure and element analysis. However, due to the traditional neutron source pulse duration being of the order of nanoseconds, it is difficult to obtain a high-resolution absorption spectrum. Thus, we present a method of ultrahigh energy-resolution absorption spectroscopy via a high repetition rate, picosecond duration pulsed neutron source driven by a terawatt laser. The technology of single neutron count is used, which results in easily distinguishing the width of approximately 20 keV at 2 MeV and an asymmetric shape of the neutron absorption peak. The absorption spectroscopy based on a laser neutron source has one order of magnitude higher energy-resolution power than the state-of-the-art traditional neutron sources, which could be of benefit for precisely measuring nuclear structure data.

All-fiber coherent beam combiners based on the self-imaging effect can achieve a near-perfect single laser beam, which can provide a promising way to overcome the power limitation of a single-fiber laser. One of the key points is combining efficiency, which is determined by various mismatches during fabrication. A theoretical model has been built, and the mismatch error is analyzed numerically for the first time. The mismatch errors have been numerically studied with the beam quality and combining efficiency being chosen as the evaluation criteria. The tolerance of each mismatch error for causing 1% loss is calculated to guide the design of the beam combiners. The simulation results are consistent with the experimental results, which show that the mismatch error of the square-core fiber is the main cause of the efficiency loss. The results can provide useful guidance for the fabrication of all-fiber coherent beam combiners.

The development of high-brightness X-ray free electron lasers (XFELs), such as hard X-ray self-seeding free electron lasers and XFEL oscillators (XFELOs), brings a severe challenge to the crystal monochromator due to a strong non-uniform thermal load. The distortion caused by spatial temperature gradients can severely affect the optical performance of crystals. Therefore, this paper presents a model to estimate the performance of non-uniform thermally distorted crystals. The model not only takes into account thermal strain, slope error and incident angle deviation, but also considers temperature-dependent factors such as the Debye–Waller factor and electric susceptibility. Our investigation indicates that the Debye–Waller factor reduces the height and bandwidth of rocking curves, and the impact of the electric susceptibility is tiny. The proposed model can describe the distortion of the reflectivity and transmissivity curves of non-uniform thermally loaded crystals and can be applied in the design of crystal monochromators, crystal splitters, crystal compressors and XFELOs.

Attosecond soft X-ray pulses are of great importance for the study of ultrafast electronic phenomena. In this paper, a feasible method is proposed to generate isolated fully coherent attosecond soft X-ray free electron laser via optical frequency beating. Two optical lasers with the opposite frequency chirps are used to induce a gradient frequency energy modulation, which helps to generate a gradually varied spacing electron pulse train. Subsequently, the undulator sections with electron beam delay lines are used to amplify the target ultra-short radiation. Numerical start-to-end simulations have been performed and the results demonstrate that an isolated soft X-ray pulse with the peak power of 330 GW and pulse duration of 620 as can be achieved by the proposed technique.

We firstly report a 2-μm all-fiber nonlinear pulse compressor based on two pieces of normal dispersion fiber (NDF), which enables a high-power scaling ability of watt-level and a high pulse compression ratio of 13.7. With the NDF-based all-fiber nonlinear pulse compressor, the 450-fs laser pulses with a repetition rate of 101.4 MHz are compressed to 35.1 fs, corresponding to a 5.2 optical oscillation cycle at the 2-μm wavelength region. The output average power reaches 1.28 W, which is believed to be the highest value never achieved from the previous 2-μm all-fiber nonlinear pulse compressors with a high pulse repetition rate above 100 MHz. The dynamic evolution of the ultrafast pulse inside the all-fiber nonlinear pulse compressor is numerically analyzed, matching well with the experimental results.

Laser–plasma accelerators (LPAs) have great potential to realize a compact X-ray free-electron laser (FEL), which is limited by the beam properties currently. Two-color high-intensity X-ray FEL provides a powerful tool for probing ultrafast dynamic systems. In this paper, we present a simple and feasible method to generate a two-color X-ray FEL pulse based on an LPA beam. In this scheme, time-dependent mismatch along the bunch is generated and manipulated by the designed lattice system, enabling FEL lasing at different wavelength within two undulator sections. The time separation between the two pulses can be precisely adjusted by varying the time-delay chicane. Numerical simulations show that two-color soft X-ray FELs with gigawatt-level peak power and femtosecond duration can be generated, which confirm the validity and feasibility of the scheme.

To generate optical vortex with multiple topological charges, a simple scheme based on the phase mask shaping technique is proposed and applied in a seeded free electron laser. With a tailored phase mask, an extreme-ultraviolet (EUV) vortex with multiple topological charges can be produced. To prove the feasibility of this method, an eight-step phase mask is designed to shape the seed laser. The simulation results demonstrate that 100-MW, fully coherent EUV vortex pulses with topological charge 2 can be generated based on the proposed technique. We have also demonstrated the possibility of generating higher topological charges by using a phase mask with more steps.

The relationship between exposure to famine in early life and the risk of ascending aorta dilatation (AAD) in adulthood is still unclear; therefore, we aimed to examine the association in the Chinese population. We investigated the data of 2598 adults who were born between 1952 and 1964 in Guangdong, China. All enrolled subjects were categorised into five groups: not exposed to famine, exposed during fetal period, and exposed during early, mid or late childhood. AAD was assessed by cardiac ultrasound. Multivariate logistic regression and interaction tests were performed to estimate the OR and CI on the association between famine exposure and AAD. There were 2598 (943 male, mean age 58·3 ± 3·68 years) participants were enrolled, and 270 (10·4 %) subjects with AAD. We found that famine exposure (OR = 2·266, 95 % CI 1·477, 3·477, P = 0·013) was associated with elevated AAD after adjusting for multiple confounders. In addition, compared with the non-exposed group, the adjusted OR for famine exposure during fetal period, early, mid or late childhood were 1·374 (95 % CI 0·794, 2·364, P = 0·251), 1·976 (95 % CI 1·243, 3·181, P = 0·004), 1·929 (95 % CI 1·237, 3·058, P = 0·004) and 2·227 (95 % CI 1·433, 3·524, P < 0·001), respectively. Subgroup analysis showed that the effect of famine exposure on the association with AAD was more pronounced in female, current smokers, people with BMI ≥ 24 kg/m2 and hypertensive patients. We observed that exposure to famine during early life was linked to AAD in adulthood.

Spoofing is a kind of deliberate interference that aims to manipulate global navigation satellite system (GNSS) receivers into counterfeit position solutions. Conventional anti-spoofing methods are implemented prior to the calculation of the position solution, depending on the specific spoofing attack mechanisms. The paper presents a spoofing detection and mitigation method implemented in the position domain. The proposed method projects the correlograms of the visible satellites to a position-clock bias domain to construct the position domain projected correlogram. P(Y) code signatures retrieved from a reference station receiver are used to identify the counterfeit position solution and remove it from the victim receiver. Compared with the conventional single-channel spoofing detection technique, the proposed anti-spoofing method is more robust against thermal noise by combining the energy from multiple satellites. Detailed mathematical derivation of the statistical characteristics of this method is presented. Its effectiveness is validated using a realistic dataset generated by a Spirent GNSS simulator and NordNav wideband front-end. Results show that the proposed algorithm is capable of not only detecting a spoofing attack but also removing the spoofing effect from the victim receiver.

The prognostic factor for in-hospital mortality in tuberculosis (TB) patients requiring intensive care unit (ICU) care remains unclear. Therefore, a retrospective study was conducted aiming to estimate the in-hospital mortality rate and the risk factors for mortality in a high-burden setting. All patients with culture-confirmed TB that were admitted to the ICU of the hospital between March 2012 and April 2019 were identified retrospectively. Data, such as demographic characteristics, comorbidities, laboratory measures and mortality, were obtained from medical records. The Cox proportional hazards regression model was used to identify prognostic factors that influence in-hospital mortality. A total of 82 ICU patients with confirmed TB were included in the analysis, and 22 deaths were observed during the hospital stay, 21 patients died in the ICU. In the multivariable model adjusted for sex and age, the levels of serum albumin and white blood cell (WBC) count were significantly associated with mortality in TB patients requiring ICU care (all P < 0.01), the hazard ratios were 0.8 (95% confidence interval (CI): 0.7–0.9) per 1 g/l and 1.1 (95% CI: 1.0–1.2) per 1 × 109/l, respectively. In conclusion, in-hospital mortality remains high in TB patients requiring ICU care. Low serum albumin level and high WBC count significantly impact the risk of mortality in these TB patients in China.