Rayleigh–Bénard convection (RBC) and Taylor–Couette flow (TCF) are two paradigmatic fluid dynamical systems frequently discussed together because of their many similarities despite their different geometries and forcing. Often these analogies require approximations, but in the limit of large radii where TCF becomes rotating plane Couette flow (RPC) exact relations can be established. When the flows are restricted to two spatial independent variables, there is an exact specification that maps the three velocity components in RPC to the two velocity components and one temperature field in RBC. Using this, we deduce several relations between both flows: (i) heat and angular momentum transport differ by $(1-R_{\Omega })$, explaining why angular momentum transport is not symmetric around $R_{\Omega }=1/2$ even though the relation between $Ra$, the Rayleigh number, and $R_{\Omega }$, a non-dimensional measure of the rotation, has this symmetry. This relationship leads to a predicted value of $R_{\Omega }$ that maximizes the angular momentum transport that agrees remarkably well with existing numerical simulations of the full three-dimensional system. (ii) One variable in both flows satisfies a maximum principle, i.e. the fields’ extrema occur at the walls. Accordingly, backflow events in shear flow cannot occur in this quasi two-dimensional setting. (iii) For free-slip boundary conditions on the axial and radial velocity components, previous rigorous analysis for RBC implies that the azimuthal momentum transport in RPC is bounded from above by $Re_S^{5/6}$, where $Re_S$ is the shear Reynolds number, with a scaling exponent smaller than the anticipated $Re_S^1$.

The incidence of obesity and its metabolic complications are rapidly increasing and become a major public health issue. This trend is associated with an increase in the prevalence of non-alcoholic fatty liver disease (NAFLD), insulin resistance and diabetes. The sequence of events leading to NAFLD progression and mitochondrial dysfunction and their interrelation remains to be elucidated. This study aimed to explore the installation and progression of NAFLD and its association with the liver mitochondrial structure and activity changes in rats fed an obesogenic diet up to 20 weeks. Male Wistar rats were fed either a standard or high-fat–high-fructose (HFHFR) diet and killed on 4, 8, 12, 16 and 20 weeks of diet intake. Rats fed the HFHFR diet developed mildly overweight, associated with increased adipose tissue weight, hepatic steatosis, hyperglycaemia and hyperinsulinaemia after 8 weeks of HFHFR diet. Hepatic steatosis and many biochemical modifications plateaued at 8–12 weeks of HFHFR diet with slight amelioration afterwards. Interestingly, several biochemical and physiological parameters of mitochondrial function, as well as its phospholipid composition, in particular cardiolipin content, were tightly related to hepatic steatosis installation. These results showed once again the interrelation between hepatic steatosis development and mitochondrial activity alterations without being able to say whether the mitochondrial alterations preceded or followed the installation/progression of hepatic steatosis. Because both hepatic steatosis and mitochondrial alterations occurred as early as 4 weeks of diet, future studies should consider these four 1st weeks to reveal the exact interconnection between these major consequences of obesogenic diet intake.

New routes in additive devices fabrication techniques and advances in printable materials are required to meet the ever increasing demands for low-cost and large-area flexible electronics. In particular, perovskite-based materials have gained an appeal due to their unique optoelectronics and ferroelectrics properties, which may replace p-n junction in semiconductor devices. Metal-organic methylammonium lead trihalide perovskite formulations have been extensively studied in the last few years as promising materials for use in printed electronics, which do not require high temperatures or vacuum environment, contrary to conventional semiconductor fabrication techniques. In this work, digital inkjet-printing in ambient atmosphere is proposed as a deposition pathway for the fabrication of perovskite active layers in photodetector and thin-film photovoltaic device architectures. The device architecture containing a printed perovskite active layer sandwiched between TiO2 and Spiro-OMeTAD as electron and hole transport layers, respectively, as well as layer-on-layer fabrication and responsivity spectra of the perovskite-based device are presented.

Demand for organic foods is partially driven by consumers' perceptions that they are more nutritious. However, scientific opinion is divided on whether there are significant nutritional differences between organic and non-organic foods, and two recent reviews have concluded that there are no differences. In the present study, we carried out meta-analyses based on 343 peer-reviewed publications that indicate statistically significant and meaningful differences in composition between organic and non-organic crops/crop-based foods. Most importantly, the concentrations of a range of antioxidants such as polyphenolics were found to be substantially higher in organic crops/crop-based foods, with those of phenolic acids, flavanones, stilbenes, flavones, flavonols and anthocyanins being an estimated 19 (95 % CI 5, 33) %, 69 (95 % CI 13, 125) %, 28 (95 % CI 12, 44) %, 26 (95 % CI 3, 48) %, 50 (95 % CI 28, 72) % and 51 (95 % CI 17, 86) % higher, respectively. Many of these compounds have previously been linked to a reduced risk of chronic diseases, including CVD and neurodegenerative diseases and certain cancers, in dietary intervention and epidemiological studies. Additionally, the frequency of occurrence of pesticide residues was found to be four times higher in conventional crops, which also contained significantly higher concentrations of the toxic metal Cd. Significant differences were also detected for some other (e.g. minerals and vitamins) compounds. There is evidence that higher antioxidant concentrations and lower Cd concentrations are linked to specific agronomic practices (e.g. non-use of mineral N and P fertilisers, respectively) prescribed in organic farming systems. In conclusion, organic crops, on average, have higher concentrations of antioxidants, lower concentrations of Cd and a lower incidence of pesticide residues than the non-organic comparators across regions and production seasons.

The science of extra-solar planets is one of the most rapidly changing areas of astrophysics and since 1995 the number of planets known has increased by almost two orders of magnitude. A combination of ground-based surveys and dedicated space missions has resulted in 560-plus planets being detected, and over 1200 that await confirmation. NASA's Kepler mission has opened up the possibility of discovering Earth-like planets in the habitable zone around some of the 100,000 stars it is surveying during its 3 to 4-year lifetime. The new ESA's Gaia mission is expected to discover thousands of new planets around stars within 200 parsecs of the Sun. The key challenge now is moving on from discovery, important though that remains, to characterisation: what are these planets actually like, and why are they as they are?

In the past ten years, we have learned how to obtain the first spectra of exoplanets using transit transmission and emission spectroscopy. With the high stability of Spitzer, Hubble, and large ground-based telescopes the spectra of bright close-in massive planets can be obtained and species like water vapour, methane, carbon monoxide and dioxide have been detected. With transit science came the first tangible remote sensing of these planetary bodies and so one can start to extrapolate from what has been learnt from Solar System probes to what one might plan to learn about their faraway siblings. As we learn more about the atmospheres, surfaces and near-surfaces of these remote bodies, we will begin to build up a clearer picture of their construction, history and suitability for life.

The Exoplanet Characterisation Observatory, EChO, will be the first dedicated mission to investigate the physics and chemistry of Exoplanetary Atmospheres. By characterising spectroscopically more bodies in different environments we will take detailed planetology out of the Solar System and into the Galaxy as a whole.

EChO has now been selected by the European Space Agency to be assessed as one of four M3 mission candidates.

The proposed mechanism for Reducing Emissions from Deforestation and Degradation (REDD+) offers significant potential for conserving forests to reduce negative impacts of climate change. Tanzania is one of nine pilot countries for the United Nations REDD Programme, receives significant funding from the Norwegian, Finnish and German governments and is a participant in the World Bank’s Forest Carbon Partnership Facility. In combination, these interventions aim to mitigate greenhouse gas emissions, provide an income to rural communities and conserve biodiversity. The establishment of the UN-REDD Programme in Tanzania illustrates real-world challenges in a developing country. These include currently inadequate baseline forestry data sets (needed to calculate reference emission levels), inadequate government capacity and insufficient experience of implementing REDD+-type measures at operational levels. Additionally, for REDD+ to succeed, current users of forest resources must adopt new practices, including the equitable sharing of benefits that accrue from REDD+ implementation. These challenges are being addressed by combined donor support to implement a national forest inventory, remote sensing of forest cover, enhanced capacity for measuring, reporting and verification, and pilot projects to test REDD+ implementation linked to the existing Participatory Forest Management Programme. Our conclusion is that even in a country with considerable donor support, progressive forest policies, laws and regulations, an extensive network of managed forests and increasingly developed locally-based forest management approaches, implementing REDD+ presents many challenges. These are being met by coordinated, genuine partnerships between government, non-government and community-based agencies.

Compressive strained Silicon from a Silicon on Insulator (SOI) substrate is obtained by replacing the buried oxide layer by a strained silicon nitride layer. The silicon overlayer and the buried dielectric are etched down to the substrate to form narrow wires (down to 300 nm wide). The Si overlayer is then expected to acquire compressive strain thanks to the relaxation of the SiN layer. The goal is to obtain a high uniaxial stress perpendicular to the wires. The structures and the strain are modeled using finite element simulations. The strain elements are used to calculate Raman spectra. Theoretical results are compared to experimental profiles deduced from resonant (UV) micro Raman experiments.

During 2001, Clostridium difficile infection was observed in 23 patients hospitalized in a hepatology ward (attack rate, 0.9%). Since strain typing ruled out a clonal dissemination, we performed a case-control study. In addition to antibiotic use as a risk factor, the C. difficile infection rate was higher among patients with autoimmune hepatitis (P < .01).

Pluto’s tenuous nitrogen atmosphere was detected by stellar occultations in 1985 and 1988. This atmosphere is poorly known, however, due to the rarity of these events. We report here the first Pluto occultations observed since 1988, on 20 July and 21 August 2002. Our analysis reveals drastic changes undergone by the atmosphere since 1988, namely a two-fold pressure increase, the probable effect of seasonal changes on Pluto over this fourteen year interval.

In Eurasian perch (Perca fluviatilis), females grow significantly faster than males. Moreover, gonadal development has a significant negative impact on somatic growth and fillet yield. In order to induce sterility, triploidy induction was attempted by subjecting fertilised eggs to heat shocks. Different combinations of temperature (28, 30, 34, 35 and 36 °C), duration (2, 5, 10 and 25 min) and time of shock initiation (TI = 3, 5 and 7 min post-fertilisation) were tested. Flow cytometry analysis was used to assess ploidy level of control and heat-shocked larvae. Low intensity (28–30 °C) and long duration (10 and 25 min) shocks lead to significantly higher survival (44 ± 26%) and triploidisation (71 ± 26%) rates than high intensity (34–36 °C) and short duration (2 and 5 min) shocks (17 ± 19% and 21 ± 26%, respectively). The most effective conditions for efficient triploidy induction were low intensity shock of 30 °C, applied 5 min post-fertilisation for 25 min. This treatment led to the production of all-triploid populations (100%) with up to 43% survival rate.

Template synthesis is a versatile nanomaterial fabrication method used to make monodisperse nanoparticles of a variety of materials including metals, semiconductors, carbons, and polymers. We have used the template method to prepare nanostructured lithium-ion battery electrodes in which nanofibers or nanotubes of the electrode material protrude from an underlying current-collector surface like the bristles of a brush. Nanostructured electrodes of this type composed of carbon, LiMn2O4, V2O5, tin, TiO2, and TiS2 have been prepared. In all cases, the nanostructured electrode showed dramatically improved rate capabilities relative to thin-film control electrodes composed of the same material. The rate capabilities are improved because the distance that Li+ must diffuse in the solid state (the current- and power-limiting step in Li-ion battery electrodes) is significantly smaller in the nanostructured electrode. For example, in a nanofiber-based electrode, the distance that Li+ must diffuse is restricted to the radius of the fiber, which may be as small as 50 nm. Recent developments in template-prepared nanostructured electrodes are reviewed.