Field experiments were conducted at Clayton and Rocky Mount, NC, during summer 2020 to determine the growth and fecundity of Palmer amaranth plants that survived glufosinate with and without grass competition in cotton. Glufosinate (590 g ai ha−1) was applied to Palmer amaranth early postemergence (5 cm tall), mid-postemergence (7 to 10 cm tall), and late postemergence (>10 cm tall) and at orthogonal combinations of those timings. Nontreated Palmer amaranth was grown in weedy, weed-free in-crop (WFIC) and weed-free fallow (WFNC) conditions for comparisons. Palmer amaranth control decreased as larger plants were treated; no plants survived the sequential glufosinate applications in both experiments. The apical and circumferential growth of Palmer amaranth surviving glufosinate treatments was reduced by more than 44% compared to the WFIC and WFNC Palmer amaranth in both experiments. The biomass of Palmer amaranth plants surviving glufosinate was reduced by more than 62% when compared with the WFIC and WFNC in all experiments. The fecundity of Palmer amaranth surviving glufosinate treatments was reduced by more than 73% compared to WFNC Palmer amaranth in all experiments. Remarkably, the plants that survived glufosinate were fecund as WFIC plants only in the Grass Competition experiment. The results prove that despite decreased vegetative growth of Palmer amaranth surviving glufosinate treatment, plants remain fecund and can be fecund as nontreated plants in cotton. These results suggest that a glufosinate-treated grass weed may not have a significant interspecific competition effect on Palmer amaranth that survives glufosinate. Glufosinate should be applied to 5 to 7 cm Palmer amaranth to cease vegetative and reproductive capacities.

Field experiments were conducted at Clayton and Rocky Mount, North Carolina, during the summer of 2020 to determine the growth and fecundity of Palmer amaranth plants that survived glufosinate with and without grass competition in soybean crops. Glufosinate (590 g ai ha−1) was applied at early postemergence (when Palmer amaranth plants were 5 cm tall), mid-postemergence (7–10 cm), and late postemergence (>10 cm) and at orthogonal combinations of those timings. Nontreated Palmer amaranth was grown in weedy (i.e., intraspecific and grass competition), weed-free in-crop (WFIC), and weed-free fallow (WFNC) conditions for comparisons. No Palmer amaranth plants survived the sequential glufosinate applications and control decreased as the plants were treated at a larger size in both experiments. The apical and circumferential growth rate of Palmer amaranth surviving glufosinate was reduced by more than 44% compared with the WFNC Palmer amaranth. The biomass of Palmer amaranth plants that survived glufosinate was reduced by more than 87% compared with the WFNC Palmer amaranth. The fecundity of Palmer amaranth that survived glufosinate was reduced by more than 70% compared with WFNC Palmer amaranth. Palmer amaranth plants that survived glufosinate were as fecund as the WFIC Palmer amaranth in both experiments in soybean fields. The results prove that despite the significant vegetative growth rate decrease of Palmer amaranth that survived glufosinate, plants can be as fecund as nontreated plants. The trends in growth and fecundity of Palmer amaranth that survives glufosinate with and without grass competition were similar. These results suggest that glufosinate-treated grass weeds may not reduce the growth or fecundity of Palmer amaranth that survives glufosinate.

A field study was conducted in 2017 and 2018 to determine foliar efficacy of halauxifen-methyl, 2,4-D, or dicamba applied alone and in combination with glyphosate at preplant burndown timing. Experiments were conducted near Painter, VA; Rocky Mount, NC; Jackson, NC; and Gates, NC. Control of horseweed, henbit, purple deadnettle, cutleaf evening primrose, curly dock, purple cudweed, and common chickweed were evaluated. Halauxifen-methyl applied at 5 g ae ha−1 controlled small and large horseweed 89% and 79%, respectively, and was similar to control by dicamba applied at 280 g ae ha−1. Both rates of 2,4-D—533 g ae ha−1(low rate [LR]) or 1,066 g ae ha−1 (high rate [HR])—were less effective than halauxifen-methyl and dicamba for controlling horseweed. Halauxifen-methyl was the only auxin herbicide to control henbit (90%) and purple deadnettle (99%). Cutleaf evening primrose was controlled 74% to 85%, 51%, and 4% by 2,4-D, dicamba, and halauxifen-methyl, respectively. Dicamba and 2,4-D controlled curly dock 59% to 70% and were more effective than halauxifen-methyl (5%). Auxin herbicides applied alone controlled purple cudweed and common chickweed 21% or less. With the exception of cutleaf evening primrose (35%) and curly dock (37%), glyphosate alone provided 95% or greater control of all weeds evaluated. These experiments demonstrate halauxifen-methyl effectively (≥79%) controls horseweed, henbit, and purple deadnettle, whereas common chickweed, curly dock, cutleaf evening primrose, and purple cudweed control by the herbicide is inadequate (≤7%).

Currently, there are seven herbicides labeled for U.S. tobacco production; however, additional modes of action are greatly needed in order to reduce the risk of herbicide resistance. Field experiments were conducted at five locations during the 2017 and 2018 growing seasons to evaluate flue-cured tobacco tolerance to S-metolachlor applied pretransplanting incorporated (PTI) and pretransplanting (PRETR) at 1.07 (1×) and 2.14 (2×) kg ai ha−1. Severe injury was observed 6 wk after transplanting at the Whiteville environment in 2017 when S-metolachlor was applied PTI. End-of-season plant heights from PTI treatments at Whiteville were likewise reduced by 9% to 29% compared with nontreated controls, although cured leaf yield and value were reduced only when S-metolachlor was applied PTI at the 2× rate. Severe growth reduction was also observed at the Kinston location in 2018 where S-metolachlor was applied at the 2× rate. End-of-season plant heights were reduced 11% (PTI, 2×) and 20% (PRETR, 2×) compared with nontreated control plants. Cured leaf yield was reduced in Kinston when S-metolachlor was applied PRETR at the 2× rate; however, treatments did not impact cured leaf quality or value. Visual injury and reductions in stalk height, yield, quality, and value were not observed at the other three locations. Ultimately, it appears that injury potential from S-metolachlor is promoted by coarse soil texture and high early-season precipitation close to transplanting, both of which were documented at the Whiteville and Kinston locations. To reduce plant injury and the negative impacts to leaf yield and value, application rates lower than 1.07 kg ha−1 may be required in these scenarios.

Rapeseed is a popular cover crop choice due to its deep-growing taproot, which creates soil macropores and increases water infiltration. Brassicaceae spp. that are mature or at later growth stages can be troublesome to control. Experiments were conducted in Delaware and Virginia to evaluate herbicides for terminating rapeseed cover crops. Two separate experiments, adjacent to each other, were established to evaluate rapeseed termination by 14 herbicide treatments at two timings. Termination timings included an early and late termination to simulate rapeseed termination prior to planting corn and soybean, respectively, for the region. At three locations where rapeseed height averaged 12 cm at early termination and 52 cm at late termination, glyphosate + 2,4-D was most effective, controlling rapeseed 96% 28 d after early termination (DAET). Paraquat + atrazine + mesotrione (92%), glyphosate + saflufenacil (91%), glyphosate + dicamba (91%), and glyphosate (86%) all provided at least 80% control 28 DAET. Rapeseed biomass followed a similar trend. Paraquat + 2,4-D (85%), glyphosate + 2,4-D (82%), and paraquat + atrazine + mesotrione (81%) were the only treatments that provided at least 80% control 28 d after late termination (DALT). Herbicide efficacy was less at Painter in 2017, where rapeseed height was 41 cm at early termination, and 107 cm at late termination. No herbicide treatments controlled rapeseed >80% 28 DAET or 28 DALT at this location. Herbicide termination of rapeseed is best when the plant is small; termination of large rapeseed plants may require mechanical of other methods beyond herbicides.

Residual herbicides are routinely applied to control troublesome weeds in pumpkin production. Fluridone and acetochlor, Groups 12 and 15 herbicides, respectively, provide broad-spectrum PRE weed control. Field research was conducted in Virginia and New Jersey to evaluate pumpkin tolerance and weed control to PRE herbicides. Treatments consisted of fomesafen at two rates, ethalfluralin, clomazone, halosulfuron, fluridone, S-metolachlor, acetochlor emulsifiable concentrate (EC), acetochlor microencapsulated (ME), and no herbicide. At one site, fluridone, acetochlor EC, acetochlor ME, and halosulfuron injured pumpkin 81%, 39%, 34%, and 35%, respectively, at 14 d after planting (DAP); crop injury at the second site was 40%, 8%, 19%, and 33%, respectively. Differences in injury between the two sites may have been due to the amount and timing of rainfall after herbicides were applied. Fluridone provided 91% control of ivyleaf morningglory and 100% control of common ragweed at 28 DAP. Acetochlor EC controlled redroot pigweed 100%. Pumpkin treated with S-metolachlor produced the most yield (10,764 fruits ha–1) despite broadcasting over the planted row; labeling requires a directed application to row-middles. A separate study specifically evaluated fluridone applied PRE at 42, 84, 126, 168, 252, 336, and 672 g ai ha–1. Fluridone resulted in pumpkin injury ≥95% when applied at rates of ≥168 g ai ha–1; significant yield loss was noted when the herbicide was applied at rates >42 g ai ha–1. We concluded that fluridone and acetochlor formulations are unacceptable candidates for pumpkin production.

Auxin herbicides are used in combinations to control glyphosate-resistant horseweed preplant burndown. Herbicide labels for 2,4-D–containing products require a 30-d rotation interval for planting cotton cultivars not resistant to 2,4-D. Dicamba labels require an accumulation of 2.5 cm of rain plus 21 d per 280 g ae ha–1 rotation interval for planting cotton cultivars not resistant to dicamba. Previous research has shown that cotton injury caused by dicamba applied 14 d before planting was transient with little effect on cotton yield, whereas 2,4-D has little effect on cotton when applied 7 d prior to planting. Injury caused by dicamba and 2,4-D is inversely related to rainfall received between herbicide application and cotton planting. Experiments were conducted to evaluate cotton tolerance to halauxifen-methyl, a new Group 4 herbicide, applied at intervals shorter than labeled requirements. Experiments were established near Painter and Suffolk, VA, and Belvidere, Clayton, Eure, Lewiston, and Rocky Mount, NC, during the 2017 and 2018 growing seasons. Herbicide treatments included halauxifen, dicamba, and 2,4-D applied 4, 3, 2, 1, and 0 wk before planting (WBP). Visible estimates of cotton growth reduction and total injury were collected 1, 2, and 4 wk after cotton emergence (WAE). Cotton stand and percentage of plants with distorted leaves were recorded 2 and 4 WAE. Cotton plant heights were recorded 4 and 8 WAE. Halauxifen was less injurious (9%) than dicamba (26%) or 2,4-D (21%) 2 WAE when herbicides were applied 0 WBP. Cotton stand reduction 2 WAE by halauxifen was less than 2,4-D and dicamba when applied 0 WBP. Injury observed from herbicides applied 1, 2, 3, and 4 WBP was minor, and no significant differences in cotton stand were observed. Early-season cotton injury was transient, and seed cotton yield was unaffected by any treatment.

Cotton growers commonly use glufosinate-based programs to control glyphosate-resistant Palmer amaranth. Palmer amaranth must be small (≤7.5 cm) for consistent control by glufosinate, and growers often miss the optimum application timing. XtendFlex™ cotton may provide growers a tool to control larger Palmer amaranth. Glufosinate, dicamba, and glufosinate plus dicamba were compared for Palmer amaranth control in a rescue situation. Herbicides were applied to 16- to 23-cm weeds (POST-1) followed by a second application (POST-2) 12 d later. Glufosinate-ammonium at 590 g ai ha−1 plus dicamba diglycolamine salt at 560 g ae ha−1 POST-1 followed by glufosinate plus dicamba POST-2 was more effective than glufosinate at 880 g ha−1 POST-1 followed by glufosinate at 590 g ha−1 POST-2 or dicamba alone applied twice. Following a directed layby application of glyphosate, diuron, and S-metolachlor 14 d after POST-2, Palmer amaranth was controlled 99% by any system containing dicamba or glufosinate plus dicamba POST-1 followed by dicamba, glufosinate, or glufosinate plus dicamba POST-2 compared with 87% to 91% control by glufosinate alone applied twice. Cotton height and number of main stem nodes at layby were reduced in systems with dicamba only POST-1 followed by dicamba or glufosinate plus dicamba POST-2, presumably due to competition from the slowly dying Palmer amaranth with dicamba only POST-1. These treatments also delayed cotton maturity and reduced lint yield compared with systems containing glufosinate plus dicamba at POST-1.

Glufosinate controls glyphosate-resistant Palmer amaranth, but growers struggle to make timely applications. XtendFlexTM cotton, resistant to dicamba, glufosinate, and glyphosate, may provide growers an option to control larger weeds. Palmer amaranth control and cotton growth, yield, and fiber quality were evaluated in a rescue situation created by delaying the first POST herbicide application. Treatments consisted of two POST applications of dicamba plus glufosinate, separated by 14 d, with the first application timely (0-d delay) or delayed 7, 14, 21, or 28 d. All treatments included a layby application of diuron plus MSMA. Palmer amaranth, 14 d after first POST, was controlled 99, 96, 89, 75, and 73% with 0-, 7-, 14-, 21-, or 28-d delays, respectively. Control increased following the second application, and the weed was controlled at least 94% following layby. Cotton yield decreased linearly as first POST application was delayed, with yield reductions ranging from 8 to 42% with 7- to 28-d delays. Delays in first POST application delayed cotton maturity but did not affect fiber quality.

Flumioxazin and fomesafen are commonly used to control glyphosate-resistant Palmer amaranth in cotton and other crops, thus increasing risk to select for Palmer amaranth biotypes resistant to protoporphyrinogen oxidase (PPO) inhibitors. A field experiment was conducted to determine the potential for fluridone and acetochlor to substitute for soil-applied PPO inhibitors in a Palmer amaranth management system with glufosinate applied twice POST and diuron plus MSMA POST-directed in conservation tillage cotton. Fluridone and flumioxazin applied preplant 23 to 34 d prior to planting were similarly effective. Fluridone and acetochlor plus diuron applied PRE controlled Palmer amaranth as well as fomesafen plus diuron PRE. All systems with preplant and PRE herbicides followed by glufosinate POST and diuron plus MSMA layby controlled Palmer amaranth well. Cotton yield did not differ among herbicide treatments. This research demonstrates that fluridone and acetochlor can substitute for soil-applied PPO-inhibiting herbicides in management systems for Palmer amaranth.