The eddy-viscosity model, as initially used to model the mean Reynolds stress, has been widely used in the linear analysis of turbulence recently by direct extension. In this study, the mechanism of the eddy viscosity in improving the prediction of fluctuation structures with linear analysis is clarified by investigating the statistical properties of forcing, eddy-viscosity term and their correlations. From the direct numerical simulation (DNS) results of turbulent channel flows with $Re_{\tau }=186$–$2003$, the spatial correlation of forcing is partially cancelled due to its interaction with eddy-viscosity terms. The stochastic forcing after excluding the eddy-viscosity term is nearly uncorrelated spatially, which better matches the condition where the resolvent modes are consistent with the spectral proper orthogonal decomposition (SPOD) modes from DNS. With the above findings, an optimisation framework is developed by minimising the spatial correlations of the stochastic forcing. The optimised eddy-viscosity profiles nearly overlap with the mean-quantity-based model in the near-wall region, but have different maximum values. Compared with the mean-quantity-based model, the optimised results enhance the consistency between the resolvent and DNS results significantly. Based on the optimised results, a new modelling framework is further abstracted, leaving only one to-be-modelled parameter of the maximum value of the eddy-viscosity profile. This parameter follows distinctive rules with spanwise flow scales, based on which a simplified predictive model is constructed. The resolvent modes predicted by the new model exhibit high consistency with SPOD modes, which are essentially comparable to the optimised results for wide ranges of streamwise and spanwise scales.

In this work, we employ well-established relations for compressible turbulent mean flows, including the velocity transformation and algebraic temperature–velocity (TV) relation, to systematically improve the algebraic Baldwin–Lomax (BL) wall model for high-speed zero-pressure-gradient air boundary layers. Any new functions or coefficients fitted by ourselves are avoided. Twelve published direct numerical simulation (DNS) datasets are employed for a priori inspiration and a posteriori examination, with Mach numbers up to 14 under adiabatic, cold and heated walls. The baseline BL model is the widely used one with semilocal scalings. Three targeted modifications are made. First, we employ a total-stress-based transformation (Griffin et al., Proc. Natl Acad. Sci. USA, vol. 118, issue 34, 2021, e2111144118) to the inner-layer eddy viscosity for improved scaling up to the logarithmic region. Second, we utilize the van Driest transformation in the outer layer based on the compressible defect velocity scaling. Third, considering the difficulty in modelling the rapidly varying and singular turbulent Prandtl number near the temperature peak in cold-wall cases, we design a two-layer strategy and use the TV relation to formulate the inner-layer temperature. Numerical results prove that the modifications take effect as designed. The prediction accuracy for mean streamwise velocity is notably improved for diabatic cases, especially in the logarithmic region. Moreover, a significant improvement in mean temperature is realized for both adiabatic and diabatic cases. The mean relative errors of temperature to DNS for all cases are down to 0.4 % in the logarithmic wall-normal coordinate and 3.4 % in the outer coordinate, around one-third of those in the baseline model.

Linear models, based on stochastically forced linearized equations, are deployed for spectral linear stochastic estimation (SLSE) of the velocity and temperature fluctuations in compressible turbulent channel flows with a bulk Mach number of 1.5. Through comparison with the direct numerical simulation (DNS) data, an eddy-viscosity-enhanced model (eLNS) outperforms the one not enhanced (LNS) in computing the coherence and amplitude ratio of streamwise velocity at different wall-normal heights, but they both largely deviate from DNS regarding the temperature prediction. For further investigation, the eigenspectra and pseudospectra of the linear operators are scrutinized. The eddy viscosity is shown to stabilize the eigenmodes and decrease the non-normality of the vortical modes. Consequently, the relative importance of acoustic and entropy modes increases, and they can contribute 20 % to 55 % of the response growth, which is not supported by DNS. Hence, it is an intrinsic defect of the eLNS model introduced by turbulence modelling. After a procedure of cospectrum decomposition, the contributions of acoustic and entropy components are filtered out. The resulting SLSE quantities for velocity, temperature and their coupling are basically agreeable with DNS, demonstrating that the coherent temperature fluctuation is dominated by advection and other vortical motions, instead of the compressibility effects. Moreover, a parameter study of Reynolds and Mach numbers (from 0.3 to 4) is conducted. The semi-local units are shown to well collapse the velocity SLSE quantities to the incompressible case for streamwise-elongated structures of high coherence.

In this work, the linear responses of turbulent mean flow to both harmonic and stochastic forcing are investigated for supersonic channel flow. Well-established universal relations are utilized to obtain efficiently the mean profiles with a large parameter space, with the bulk Mach number up to 5 and the friction Reynolds number up to $10^4$, so a systematic parameter study is feasible. The most amplified structure takes the form of streamwise velocity and temperature streaks forced optimally by the streamwise vortices. The outer peak of the pre-multiplied energy amplification corresponds to the large-scale motion, whose spanwise wavelength ($\lambda _z^+$) is very insensitive to compressibility effects. In contrast, the classic inner peak representing small-scale near-wall motions disappears for the stochastic response with increasing Mach number. Meanwhile, the small-scale motions become much less coherent. A decomposition of the forcing identifies different effects of the incompressible counterpart and the thermodynamic components. Wall-cooling effects, arising with high Mach number, increase the spacing of the most amplified near-wall streaks; the spacing becomes nearly invariant with Mach number if expressed in semi-local units. Meanwhile, the coherence of stochastic response with $\lambda _z^+>90$ is enhanced, but on the other hand, with $\lambda _z^+<90$ it is decreased. The geometrical self-similarity of the response in the mid-$\lambda _z$ range is still roughly satisfied, insensitive to Mach number. Finally, theoretical analyses of the perturbation equations are presented to help with understanding the scaling of energy amplification.

This serial work presents a linear-time-invariance (LTI) notion to the Koopman analysis, finding consistent and physically meaningful Koopman modes and addressing a long-standing problem of fluid mechanics: deterministically relating the fluid excitations and corresponding structure reactions. Part 1 (Li et al., Phys. Fluids, vol. 34, no. 12, p. 125136) developed the Koopman-LTI architecture and applied it to a pedagogical prism wake. By a systematic analytical procedure, the Koopman-LTI generated sampling-independent linear models that captured all the recurring dynamics embedded in the input data, finding six corresponding, orthogonal, and in-synch fluid–structure mechanisms. This Part 2 analyses the six modal duplets to underpin their physical implications, providing a phenomenological analysis of the subcritical prism wake. Visualizing the newly proposed dynamic Koopman modes, results show that two mechanisms at St1 = 0.1242 and St5 = 0.0497 describe shear layer dynamics, the associated Bérnard–Kármán shedding and turbulence production, which together overwhelm the upstream and crosswind walls by instigating a reattachment-type of reaction. The on-wind walls’ dynamical similarity renders them a spectrally unified fluid–structure interface. Another four harmonic counterparts, namely the subharmonic at St7 = 0.0683, the second harmonic at St3 = 0.2422, and two ultra-harmonics at St7 = 0.1739 and St13 = 0.1935, govern the downstream wall. Finally, this work discovered the vortex breathing phenomenon, describing the constant energy exchange in the wake's circulation-entrainment-deposition processes. With the Koopman-LTI, one may pinpoint the exact excitations responsible for a specific structure reaction, benefiting future investigations into fluid–structure interactions and nonlinear, stochastic systems.

This study explored the latent profiles of self-regulated learning (SRL) strategies (cognitive, metacognitive, and motivational regulation) endorsed by Chinese English-as-a-foreign-language (EFL) readers in a high-stakes testing environment, and also their associations with individual factors (gender, grade, reading proficiency, and motivational beliefs). With a sequential explanatory mixed-methods design, students in grades 11 and 12 (n = 1,113) completed a reading comprehension test and a questionnaire regarding their strategy use and individual factors, and some (n = 16) were randomly selected for follow-up semi-structured interviews. Findings revealed three SRL profiles, characterized by high, medium, and low levels of SRL-strategy use. Self-efficacy and extrinsic motivation most powerfully predicted an individual’s profile membership; all the intrinsic and extrinsic motivation variables were significantly higher for learners from the higher strategy-use profile. Moreover, reading proficiency did not significantly predict profile membership, but more self-regulated students still achieved higher reading scores as a group tendency.

The time to positivity (TTP) of blood cultures has been considered a predictor of clinical outcomes for bacteremia. This retrospective study aimed to determine the clinical value of TTP for the prognostic assessment of patients with Escherichia coli bacteremia. A total of 167 adult patients with E.coli bacteremia identified over a 22-month period in a 3500-bed university teaching hospital in China were studied. The standard cut-off TTP was 11 h in the patient cohort. The septic shock occurred in 27.9% of patients with early TTP (⩽11 h) and in 7.1% of those with a prolonged TTP (>11 h) (P = 0.003). The mortality rate was significantly higher for patients in the early than in the late group (17.7% vs. 4.0%, P < 0.001). Multivariate analysis showed that an early TTP (OR 4.50, 95% CI 1.70–11.93), intensive care unit admission (OR 8.39, 95% CI 2.01–35.14) and neutropenia (OR 4.20, 95% CI 1.55–11.40) were independently associated with septic shock. Likewise, the independent risk factors for mortality of patients were an early TTP (OR 3.80, 95% CI 1.04–12.90), intensive care unit admission (OR 6.45; 95% CI 1.14–36.53), a Pittsburgh bacteremia score ⩾2 (OR 4.34, 95% CI 1.22–15.47) and a Charlson Comorbidity Index ⩾3 (OR 11.29, 95% CI 2.81–45.39). Overall, a TTP for blood cultures within 11 h appears to be associated with worse outcomes for patients with E.coli bacteremia.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

Compared with commercial polyolefin membranes, polyacrylonitrile (PAN) membrane prepared by electrostatic spinning has higher porosity, electrolyte uptake, thermal stability, and lithium-ion conductivity, etc. However, poor mechanical performance has largely limited the application of electrospun PAN separators. In this study, PAN/polyimide (PI) composite membrane is prepared by electrostatic spinning to improve the mechanical and electrochemical performances. Scanning electron microscopy, thermal analysis method, and electrochemical methods were used for evaluation of the electrospun composite membrane. The results show that the composite membrane possesses good thermal stability and exhibits better mechanical performance than pristine PAN membrane (increasing by 1.1 times in tension strength). The addition of PI can increase porosity and fluid absorption rate obviously. In addition, the composite membrane has high ionic conductivity (18.77 × 10−4 S/cm), wide electrochemical window (about 4.0 V), and excellent cycling performance. It can retain a discharge specific capacity of 153 mA h/g even after 50 cycles at 0.5 C. The electrospun PAN/PI membrane may be a promising candidate for lithium-ion battery separators.

Sulphur isotopes can be used as a powerful tool to trace fluid evolution and explore the formation of chimneys. To clarify the in situ S isotopic variations of sulphides at the micro-scale, we analyzed a sulphide chimney collected from the hydrothermal field in the East Pacific Rise 1–2° S using a sensitive high-mass-resolution ion micro-probe for stable isotopes (SHRIMP SI). Three mineral zones can be identified in the chimney: an external outer wall of porous anhydrite and colloform pyrite, an internal middle zone of sub-euhedral pyrite and massive chalcopyrite, and an inner zone of massive pyrite. The δ34SV-CDT values of the sulphides fall within the range 1.83–7.51 ‰ (avg. 4.05 ‰, n = 16), and S isotopic values increase from the core (3.09 ‰, n = 3) to the middle (3.78 ‰, n = 11) to the edge (6.99 ‰, n = 2). These results illustrate mineral crystallization processes and the mixing between seawater-derived S and magmatic–hydrothermal fluids during the growth of the chimney. The zones from the edge to the core are characterized by crystal morphologies of colloform/anhedral pyrite to massive pyrite with decreasing δ34S values, revealing multi-stage mineral deposition and sulphur isotopic fractionation. In contrast to the increase in δ34S values from the core to the edge in one profile (profile A), anomalously low δ34S values in fine-grained pyrite relative to chalcopyrite in another profile (profile B) in the middle zone result from S isotopic exchange between seawater SO42− and fluid H2S due to different fluid–seawater mixing, possibly caused by variations in permeability and porosity across the chimney.

The musk deer (Moschus berezovskii) is an economically important species from which musk is extracted and used in perfumes and medicines. Cestodes (parasitic flatworms) of the genus Moniezia are important parasites that infect this endangered species and can cause high mortality in young deer. In 1982, Moniezia (S.) sichuanensis sp. nov. was described from a specimen obtained from wild musk deer. The new species was distinct from the other described species of Moniezia by the sawtooth-shaped interproglottidal glands, the thick vagina and the absence of a cirrus spine. In the present study, 12 cestodes collected from musk deer were examined morphologically and confirmed to be M. sichuanensis. Molecular characterization was performed by amplifying and comparing the internal transcribed spacer 1 (ITS1) and 5.8S rRNA gene (ITS1–5.8S) of ribosomal DNA with available sequences from other Moniezia species. The amplified sequences ranged from 761 to 764 bp and similarity ranged from 98.7–100%, compared to 67.8–92.4% with other Moniezia spp. Construction of a phylogenetic tree using the neighbour-joining method indicated that all 12 ITS1–5.8S sequences formed a single clade, confirming M. sichuanensis as a separate species. This study provides novel molecular insight into M. sichuanensis that could prove useful for future diagnosis and control of monieziasis in musk deer.

The hydrobaric effect on photoactivity of titanium dioxide (TiO2) fabricated by cathodic deposition in an aqueous solution was evaluated in this study. When the applied pressure was increased to 35 MPa, the water-splitting performance was improved by almost fourfold of the performance of the TiO2 prepared at atmospheric pressure. The surface states effect was significant in the deposited TiO2, which was exploited to affect the charges recombination of TiO2, and thereby enhance the resultant photoelectrochemical water-splitting performance. The hydrobaric cathodic deposition could be extended to fabrication of other metal oxides to eliminate the negative influence from the high-temperature process.

The integration of synchrotron and high-pressure techniques has significantly advanced research in materials science, giving rise to many important discoveries in physics, chemistry, environmental science, and many other fields of physical and engineering sciences. The relevant frontier work in multiple disciplines is reviewed. The selected studies include high-pressure superconductivity, lattice dynamics of materials, plastic deformation of nanomaterials, polyamorphic transitions and devitrification in metallic glass, rheology of minerals, and high-pressure chemistry probing.

This study modified the surfaces of three kinds of TiNi-based shape memory alloys (SMAs) by dry electrical discharge machining (EDM) in nitrogen (N2) and acetylene (C2H2) gas mixture. The effects of composition of the dielectric medium and work-piece on the machining performance and surface characteristics were investigated. Increasing the ratio of acetylene gas in gas mixture was beneficial for improving the material removal rate (MRR). However, adding a large amount of acetylene gas resulted in unstable discharge. A recast layer, comprising nitrides and carbides, which well adhered on the EDMed surface exhibited high hardness. Among Ti50Ni50, Ti50Ni49.5Cr0.5, and Ti40.5Ni49.5Zr10 SMA as a work-piece, Ti40.5Ni49.5Zr10 SMA has the lowest MRR owing to it possessed the highest melting temperature and thermal conductivity. The recast layer on Ti40.5Ni49.5Zr10 SMA, comprising zirconium nitride, exhibited the highest hardness and adhesion among all the SMAs. However, the high-hardness recast layer deteriorated the shape recovery of the SMA.