The serpentine subgroup mineral berthierine was synthesized as a metastable precursor of the chlorite group mineral chamosite in cold seal pressure vessels at 575°C, 0.5 GPa and fO2-conditions of the NNO buffer from a glass of almandine bulk composition. The run products were investigated with X-ray powder diffraction (XRD), Mossbauer spectroscopy and electron microprobe analysis. One run product was also investigated by high-resolution transmission electron microscopy (HRTEM) and its heat capacity measured by heat pulse calorimetry and by differential scanning calorimetry in the temperature range 5–323 K. The XRD and HRTEM investigations clearly showed that the periodicity along the c axis of this sample is 7 Å demonstrating that the serpentine subgroup mineral berthierine of composition (Fe2+1.83Fe3+0.33Al0 67)[Si1.33Al0.67O5](OH)4 has formed in the synthesis experiments.

Integration of our heat capacity data, corrected to the composition (Fe2.5Al0.5)[Si1.5Al0.5O5](OH)4 for end-member berthierine, yields a standard entropy of 284.1±0.3 J mol−1 K−1. The Cp polynomial Cp = 610.72 − 5140.0 × T−0.5 − 5.8848 × 106T−2 + 9.5444 × 108T–3 is recommended for thermodynamic calculations above 298 K involving berthierine.

In this prospective cohort of 1,012 Swiss hospital employees, 3 different assays were used to screen serum for SARS-CoV-2 antibodies. Seropositivity was 1%; the positive predictive values of the lateral-flow immunoassay were 64% (IgG) and 13% (IgM). History of fever and myalgia most effectively differentiated seropositive and seronegative participants.

Increasing the number of quantum bits while preserving precise control of their quantum electronic properties is a significant challenge in materials design for the development of semiconductor quantum computing devices. Semiconductor heterostructures can host multiple quantum dots that are electrostatically defined by voltages applied to an array of metallic nanoelectrodes. The structural distortion of multiple-quantum-dot devices due to elastic stress associated with the electrodes has been difficult to predict because of the large micrometer-scale overall sizes of the devices, the complex spatial arrangement of the electrodes, and the sensitive dependence of the magnitude and spatial variation of the stress on processing conditions. Synchrotron X-ray nanobeam Bragg diffraction studies of a GaAs/AlGaAs heterostructure reveal the magnitude and nanoscale variation of these distortions. Investigations of individual linear electrodes reveal lattice tilts consistent with a 28-MPa compressive residual stress in the electrodes. The angular magnitude of the tilts varies by up to 20% over distances of less than 200 nm along the length of the electrodes, consistent with heterogeneity in the metal residual stress. A similar variation of the crystal tilt is observed in multiple-quantum-dot devices, due to a combination of the variation of the stress and the complex electrode arrangement. The heterogeneity in particular can lead to significant challenges in the scaling of multiple-quantum-dot devices due to differences between the charging energies of dots and uncertainty in the potential energy landscape. Alternatively, if incorporated in design, stress presents a new degree of freedom in device fabrication.

Polycrystalline copper (99.9%) was fatigued at a total strain amplitude of 0.1 and 0.2%, respectively. The tests were performed in situ under vacuum in a Large Chamber-Scanning Electron Microscope. By a repeated combination of in situ fatigue testing and ex situ focused ion beam milling, a deep insight into the mechanism of fatigue crack initiation and early stages of crack initiation at persistent slip bands (PSBs) and their interaction with grain boundaries was obtained. The EBSD-technique showed early slip activation and the exclusive formation of extrusions in favorably oriented grains until a certain extrusion height was reached. At the total strain amplitude of 0.2%, extrusions are formed not only in favorably oriented grains but also in grains with a lower Schmid factor due to high compatibility stresses at the grain boundaries. Extrusion growth through grain boundaries is affected by the orientation of the primary slip systems in the neighboring grains and the additional anisotropy stresses. It is concluded that early stages of crack initiation are the consequence of the formation of extrusions at PSBs in combination with the clustering of vacancies along the PSB boundaries, as it was proposed by the well-known Essmann–Gösele–Mughrabi model.

Tephra-fall deposits from Cook Inlet volcanoes were detected in sediment cores from Tustumena and Paradox Lakes, Kenai Peninsula, Alaska, using magnetic susceptibility and petrography. The ages of tephra layers were estimated using 21 14C ages on macrofossils. Tephras layers are typically fine, gray ash, 1–5 mm thick, and composed of varying proportions of glass shards, pumice, and glass-coated phenocrysts. Of the two lakes, Paradox Lake contained a higher frequency of tephra (0.8 tephra/100 yr; 109 over the 13,200-yr record). The unusually large number of tephra in this lake relative to others previously studied in the area is attributed to the lake's physiography, sedimentology, and limnology. The frequency of ash fall was not constant through the Holocene. In Paradox Lake, tephra layers are absent between ca. 800–2200, 3800–4800, and 9000–10,300 cal yr BP, despite continuously layered lacustrine sediment. In contrast, between 5000 and 9000 cal yr BP, an average of 1.7 tephra layers are present per 100 yr. The peak period of tephra fall (7000–9000 cal yr BP; 2.6 tephra/100 yr) in Paradox Lake is consistent with the increase in volcanism between 7000 and 9000 yr ago recorded in the Greenland ice cores.

This paper presents a position gauging system of welding joints. While the principle measurement concept was already introduced by Schrattenecker et al. in 2014, here it is focused on different types of practically used welding materials. The sensor used is based on the frequency-modulated continuous-wave principle operating in the W-band. Position estimation (PoE) of different welding geometries is carried out with polarimetric scattering effects introduced by geometrical discontinuities. For the real-time calculation of the signal models a field simulation tool we developed is used. Aside from a variety of geometries, we introduce a geometrical optimization approach that increases the achievable accuracy of the measurement concept. The optimization and PoE of the different welding materials were examined in various simulations and the results were verified by measurements in the laboratory and in an industrial environment. Simulation and measurement were in good agreement.

In several recent communications from these laboratories, we have described observations that thin organic layers which are rich in primary amine (R-NH2) groups are very efficient surfaces for the adhesion of mammalian cells, even for controlling the differentiation of stem cells. We prepare such deposits by plasma polymerization at low pressure (thin films designated “L-PPE:N”, for “Low-pressure Plasma Polymerized Ethylene containing Nitrogen”), at atmospheric (“High”) pressure (“H-PPE:N”), or by vacuum-ultraviolet photo-polymerization (“UV-PE:N”). More recently, we have also investigated a commercially available material, Parylene diX AM.

In the present communication we shall, first, briefly introduce literature relating to electrostatic interactions between cells, proteins, and charged surfaces. Next, we discuss the comparative results of physico-chemical characterizations of the various organic deposits mentioned above, which deliberately contain varying concentrations of nitrogen, [N], and amine groups, [NH2]. Finally, we present certain selected cell-response results that pertain to applications in orthopedic medicine; we discuss the influence of surface properties on the observed behaviors of various cell lines, with particular emphasis on possible electrostatic attractive forces due to positively charged R-NH3+ groups and negatively charged proteins and cells, respectively.

Long-term administration of PUFA is known to modulate immune functions and apoptotic pathways depending on the respective amount of n-6 and n-3 fatty acids (FA). Data on short-term effects on apoptotic pathways are rare. Apoptosis of splenic lymphocytes is the hallmark of detrimental sepsis. Therefore, we aimed to compare the immediate effects of parenterally administered n-6-enriched soyabean oil (SO)- and n-3-enriched fish oil (FO)-based lipid emulsions after laparotomy (LAP; sham procedure) and after induction of acute, severe sepsis by caecal ligation and incision. After 390 min of observation time, plasma was analysed for IL-1β, IL-6 and NEFA. Apoptosis in splenic lymphocytes was quantified by Annexin-V expression. After LAP, infusion of both FO and SO did not change cytokine concentrations. Sepsis increased both cytokines. FO but not SO further augmented the rise. After LAP, SO increased NEFA, and both lipid emulsions reduced free arachidonic acid (AA). Sepsis resulted in a dramatic decrease in NEFA and AA. The drop in NEFA and AA was prevented by both SO and FO. In addition, FO resulted in an increased concentration of n-3 FA under both conditions. Infusion of both lipid emulsions induced apoptosis in splenic lymphocytes after LAP. Sepsis-induced apoptosis was not further enhanced by FO or SO. The present study shows that short-term administration of FO as opposed to SO caused pro-inflammatory effects during sepsis. Moreover, short-term administration of both SO and FO suffices to induce apoptosis in splenic lymphocytes. Finally, SO and FO do not further enhance sepsis-induced splenic apoptosis.

New technologies have resulted in transmission lines that deviate significantly from the intended rectangular cross sections. Trapezoidal cross sections and roughness that penetrate a significant depth into the surface in comparison to the skin-depth of the conductor can cause a very significant deviation in transmission line parameters from predicted values. Proximity effect further complicates the analysis by increasing losses and changing the impact of surface roughness by changing the current distribution. A skin-effect filament model that combines a traditional skin-effect filament modeling concept with traditional surface roughness modeling concepts is presented that accounts for surface roughness effects and non-ideal cross sections. The new technique models the transmission line non-idealities in a combined way with the current density in the signal and return current paths. This adapted filament model shows an average deviation of less than 2% above 1 GHz with one given transmission line measurement and does not have the computational challenges seen in a 3D full-wave solver.

We report on a room temperature detector of infrared/terahertz laser radiation allowing to measure and characterized the radiation polarization state with picosecond time resolution.

The objective of this work is to increase the open circuit voltage of CuGaSe2(CGS)-based solar cells without decreasing their efficiency. For that, the interface between the p-type CGS absorber and the n-type CdS/ZnO window layer is compared using three different recipes for the growth of the buffer layer. Results show the importance of the adaptation of the CdS buffer layer to the CuGaSe2 absorber film. A maximum open circuit voltage of 922 mV is achieved for the devices when using 60ºC as the chemical bath temperature and a low thiourea concentration. Drive-level capacitance profiling, external quantum efficiency and temperature dependent current-voltage measurements reveal a better quality of the CdS/CuGaSe2 interface for this buffer layer deposition conditions. Factors such as the larger depletion region width and the lower doping level, reducing the tunnelling component, are pointed out as responsible of the higher Voc.

The segregation of As atoms at the Si/SiO2 interface during annealing was investigated by grazing incidence X-ray fluorescence spectroscopy in combination with successive removal of silicon layers by etching with thicknesses on the order of a nanometer. With this method it is possible to clearly distinguish between the segregated atoms and the As atoms in the bulk over a large range of implantation doses from 3·12 cm−2 to 1·16 cm−2. The samples were annealed at 900 °C and 1000 °C, respectively, for times sufficiently long to ensure that the segregation reflects an equilibrium effect. The results were confirmed by medium energy ion scattering, Z-contrast measurements and electron energy loss spectroscopy.

Chalcopyrite-type thin films - CuInS2, CuInSe2, CuGaSe2, and Cu(In,Ga)Se2 - in various completed solar cells were studied in cross-section by means of electron-backscatter diffraction (EBSD). Valuable information on grain sizes, local grain orientations, film textures, and grain boundaries were extracted from the EBSD linescans and maps. The grain-size distributions from the chalcopyrite-type thin films can be represented well by lognormal distribution functions. The EBSD measurements on CuGaSe2 thin film reveal a <110> fiber texture, in good agreement with x-ray diffraction texture analysis performed on the same sample. The EBSD maps from all samples studied exhibit considerable twinning in the chalcopyrite-type thin films. Indeed, the most frequent types of grain boundaries in these thin films are (near) Σ3 60°-<221> and 71°-<110> twins. It is shown that rotational 180°-<221> twins (which are symmetrically equivalent to 71°-<110>) are more frequently found than anion- or cation-terminated 60°-<221> twin boundaries.

The synthesis of MS2 (M = Mo, W) onion-like nanoparticles by means of a high temperature MOCVD process starting from W(CO)6 and elemental sulfur is reported. The reaction can also be carried out in two steps where the intermediate amorphous WS2 nanoparticles formed through the high temperature reaction of tungsten and sulfur in the initial phase of the reaction are isolated and converted in a separate annealing step to onion-type WS2 nanoparticles. Based on a study of the temperature dependence of the reaction a set of conditions could be derived where onion-like structures were formed in a one-step reaction. Onion-like structures obtained in the single-step process were filled, whereas the particles obtained by the two-step procedure were systematically hollow. A model could be devised to rationalize the different outcome of the reactions. The MOCVD approach therefore allows a selective synthesis of open and filled fullerene-like chalcogenide nanoparticles. Furthermore, we demonstrate the novel surface functionalization of WS2 nanotubes with polymeric ligands by complexation with a combination of Ni2+ via an scorpionate-type nitrilotriacetic acid (NTA) and immobilization of TiO2 nanoparticles onto the surface of nanotubes. Synthesis of such a functional polymeric ligand was achieved via a reactive polymer precursor route.

For laboratory scale devices the transfer of the Cu(In,Ga)Se2 (CIGSe) thin film technology from a rigid float glass substrate to flexible titanium foil is achieved. Here we will highlight the effect of the rough, flexible substrate on the electrical and optical characteristics of the transparent window layers of such devices. The roughness of the substrate may give rise to changes in sheet resistance of the transparent front contact and in the reflectivity of the completed device. However, the devices deposited onto the kind of titanium foil substrate used in this work are smooth enough not to affect the sheet resistance; nevertheless optical effects are enough to affect the process window for an antireflective coating. With the use of an antireflective coating, a maximum efficiency of 17.4% could be reached for 0.5 cm2 area devices on glass.