Let G and H be two vertex disjoint graphs. The join $G+H$ is the graph with $V(G+H)=V(G)+V(H)$ and $E(G+H)=E(G)\cup E(H)\cup \{xy\;|\; x\in V(G), y\in V(H)\}$. A (finite) linear forest is a graph consisting of (finite) vertex disjoint paths. We prove that for any finite linear forest F and any nonnull graph H, if $\{F, H\}$-free graphs have a $\chi $-binding function $f(\omega )$, then $\{F, K_n+H\}$-free graphs have a $\chi $-binding function $kf(\omega )$ for some constant k.

The acoustic response of a five-bladed rotor to an axisymmetric turbulent boundary layer at the tail end of a body of revolution (BOR) is investigated numerically to elucidate the physical sources of acoustics, particularly the role of coherent structures in sound generation. The BOR is at a length-based Reynolds number of $1.9 \times 10^6$ and free-stream Mach number of 0.059. Two rotor advance ratios, $1.44$ and $1.13$, are considered. The turbulent boundary layer on the nose and midsection of the BOR is computed using wall-modelled large-eddy simulation, whereas that in the acoustically important tail-cone section is wall-resolved. The radiated acoustic field is calculated using the Ffowcs Williams–Hawkings equation. The computed flow statistics and sound pressure spectra agree well with the experimental measurements at Virginia Tech. In addition to broadband turbulence-ingestion noise, spectral humps near multiples of the blade-passing frequency and accompanying valleys are captured. They are shown to be caused by correlated blade unsteady-loading dipole sources and their constructive and destructive interference as a result of successive blades cutting through the same coherent structures. The latter undergo rapid growth in the decelerating tail-cone boundary layer before their interaction with the rotor. The acoustic radiation is dominated by the outer region of the blade owing to a combination of larger blade chord-length, inflow turbulence intensity and blade speed. The numerical results also correctly predict the effect of the rotor advance ratio on the acoustic field. A mixed free-stream/convection Mach-number scaling successfully collapses the sound pressure spectra at the two advance ratios.

The mid-infrared optical frequency comb is a powerful tool for gas sensing. In this study, we demonstrate a simple mid-infrared dual-comb spectrometer covering 3–4 μm in LiNbO3 waveguides. Based on a low-power fiber laser system, the mid-infrared comb is achieved via intra-pulse difference frequency generation in the LiNbO3 waveguide. We construct pre-chirp management before supercontinuum generation to control spatiotemporal alignment for pump and signal pulses. The supercontinuum is directly coupled into a chirped periodically poled LiNbO3 waveguide for the 3–4 μm idler generation. A mid-infrared dual-comb spectrometer based on this approach provides a 100 MHz resolution over 25 THz coverage. To evaluate the applicability for spectroscopy, we measure the methane spectrum using the dual-comb spectrometer. The measured results are consistent with the HITRAN database, in which the root mean square of the residual is 3.2%. This proposed method is expected to develop integrated and robust mid-infrared dual-comb spectrometers on chip for sensing.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

This article investigates the practices of precarious playbour on Kuaishou, a short-video platform embracing the idea of ‘recording the lives of ordinary people’ and attracting massive numbers of migrant youth to produce creative content as free labour. It examines how young migrants from rural areas in China engage in Kuaishou as a means of realising upwards socio-economic mobility by producing a tuwei (earthiness) culture which has a large fan base. It also examines the way in which they collaborate to cope with precarious conditions lacking guaranteed working time and income, and labour protection. The article attempts to build a conversation with existing scholarship that addresses the ‘exploitation vs. empowerment’ dialectic of labour production. Instead, we address the complexity of digital labour production characterised by a collaborative and symbiotic relationship between social media platforms and users. Through ‘play’ with their followers that generates profit for the digital platform, migrant youth voluntarily accept the uncertain, unpredictable, and risky conditions of digital labour production. They are, however, not passively subjected to platform exploitation but can instead reclaim agency by actively seeking to collaborate with other users to cope with increasing precariousness.

The transition from puddled-transplanted rice (Oryza sativa L.) (PTR) to direct-seeded rice (DSR) is gaining popularity in central China. In contrast, the PTR system is the most common practice in southwest China. Weeds are a major problem in the paddy fields of the DSR systems, and herbicides are widely used for weed control. However, the increased frequency and rate of herbicide use leads to the rapid evolution of resistance. Smallflower umbrella sedge (Cyperus difformis L.) is a troublesome weed species in rice fields of China and is usually controlled by the acetolactate synthase (ALS)-inhibiting herbicide bensulfuron-methyl. Here, we collected 32 C. difformis populations from DSR systems (Hunan Province) and PTR systems (Guangxi Province) and investigated their resistance to bensulfuron-methyl. Results revealed 80% (8 out of 10) populations from Hunan Province and 14% (3 out of 22) populations from Guangxi Province had evolved resistance to bensulfuron-methyl. Five populations from Hunan Province (HN-2, HN-3, HN-5, HN-9, HN-10) possessing the Trp-574-Leu mutation had high-level resistance (ranging from 169- to >1,309-fold) based on GR50 ratios. The resistant populations from Guangxi Province had a lower level of resistance to bensulfuron-methyl due to a Pro-197-Ser mutation. The Asp-376-Glu mutation was only identified in the HN-4 population. In addition, the GX-3 population from the PTR systems was resistant to bensulfuron-methyl without ALS gene mutations, indicating non–target site resistance (NTSR). Although some resistant populations of both regions exhibited cross-resistance to multiple ALS-inhibiting herbicides, including pyrazosulfuron-ethyl, bispyribac-sodium, penoxsulam, and imazapic, sensitivity was also detected to the auxin herbicide MCPA and the photosystem II–inhibiting herbicides bentazone and propanil. These results indicate that cultivation practices affect resistance evolution in C. difformis. DSR systems exert high selection pressure by selecting the Trp-574-Leu mutation, resulting in high-level resistance. In contrast, a mutation at Pro-197 plus NTSR likely plays a significant role in ALS resistance in the PTR systems.

Echinococcus granulosus sensu lato has complex defence mechanisms that protect it from the anti-parasitic immune response for long periods. Echinococcus granulosus cyst fluid (EgCF) is involved in the immune escape. Nevertheless, whether and how EgCF modulates the inflammatory response in macrophages remains poorly understood. Here, real-time polymerase chain reaction and enzyme-linked immunosorbent assay revealed that EgCF could markedly attenuate the lipopolysaccharide (LPS)-induced production of pro-inflammatory factors including tumour necrosis factor-α, interleukin (IL)-12 and IL-6 but increase the expression of IL-10 at mRNA and protein levels in mouse peritoneal macrophages and RAW 264.7 cells. Mechanically, western blotting and immunofluorescence assay showed that EgCF abolished the activation of nuclear factor (NF)-κB p65, p38 mitogen-activated protein kinase (MAPK) and ERK1/2 signalling pathways by LPS stimulation in mouse macrophages. EgCF's anti-inflammatory role was at least partly contributed by promoting proteasomal degradation of the critical adaptor TRAF6. Moreover, the EgCF-promoted anti-inflammatory response and TRAF6 proteasomal degradation were conserved in human THP-1 macrophages. These findings collectively reveal a novel mechanism by which EgCF suppresses inflammatory responses by inhibiting TRAF6 and the downstream activation of NF-κB and MAPK signalling in both human and mouse macrophages, providing new insights into the molecular mechanisms underlying the E. granulosus-induced immune evasion.

Several epidemiological studies have investigated that Na or K intakes might be associated with the metabolic syndrome (MetS). However, little evidence has evaluated the association between Na:K ratio and the MetS. In this study, we assessed the association between the dietary Na:K ratio and the MetS. The cross-sectional study was conducted among adults aged 18 years and older in Nanjing, using a multi-stage random sampling method, which resulted in a sample size of 1993 participants. Dietary Na and K intakes were assessed by 3 consecutive days of dietary recollection combined with condiments weighing method. Health-related data were obtained by standardised questionnaires, as well as physical examinations and laboratory assessments. The prevalence rate of the MetS was 36·5 % (728/1993). After adjusting for various lifestyle and dietary factors of the MetS, participants in the highest quartile of dietary Na:K ratio were at a higher risk of developing MetS (OR=1·602; 95 % CI 1·090, 2·353) compared with those in the lowest quartile. Each 1-sd increase in dietary Na:K ratio was associated with a higher risk of prevalent MetS (OR=1·166; 95 % CI: 1·018, 1·336). Among the components of the MetS, dietary Na:K ratio was positively associated with high blood pressure (quartile 3 v. quartile 1: OR=1·656; 95 % CI 1·228, 2·256) and hypertriacylglycerolaemia (quartile 4 v. quartile1: OR=1·305; 95 % CI 1·029, 1·655) in multivariate analysis. These results revealed that higher dietary Na:K ratio significantly increased the risk of the MetS in Chinese adults. Further studies are needed to verify this association.

In the past few years, we have performed a 22 GHz H2O maser survey towards hundreds of BGPS sources using the 25-meter Nanshan Radio Telescope (NSRT) of the Xinjiang Astronomical Observatory, and detected more than one hundred masers. Our aim is to study star formation activities associated with these sources, as well as search for any correlations that may exist between 22 GHz H2O masers and the evolutionary stage of high-mass star formation regions. The NSRT has been upgraded and have now an effective diameter of 26 meter. Besides, cryogenically cooled dual-beam receiver systems covering seven millimeter-wave observing bands have been installed on the NSRT. For the next step of maser observation, we will continue to do H2O and SiO masers survey of massive dust clumps and monitor some maser sources.

In this paper, a double-passage shape correction (DPSC) method is presented for simulation of unsteady flows around vibrating blades and aeroelastic prediction. Based on the idea of phase-lagged boundary conditions, the shape correction method was proposed aimed at efficiently dealing with unsteady flow problems in turbomachinery. However, the original single-passage shape correction (SPSC) may show the disadvantage of slow convergence of unsteady solutions and even produce nonphysical oscillation. The reason is found to be related with the disturbances on the circumferential boundaries that can not be damped by numerical schemes. To overcome these difficulties, the DPSC method is adopted here, in which the Fourier coefficients are computed from flow variables at implicit boundaries instead of circumferential boundaries in the SPSC method. This treatment actually reduces the interaction between the calculation of Fourier coefficients and the update of flow variables. Therefore a faster convergence speed could be achieved and also the solution stability is improved. The present method is developed to be suitable for viscous and turbulent flows. And for real three-dimensional (3D) problems, the rotating effects are also considered. For validation, a 2D oscillating turbine cascade, a 3D oscillating flat plate cascade and a 3D practical transonic fan rotor are investigated. Comparisons with experimental data or other solutions and relevant discussions are presented in detail. Numerical results show that the solution accuracy of DPSC method is favorable and at least comparable to the SPSC method. However, fewer iteration cycles are needed to get a converged and stable unsteady solution, which greatly improves the computational efficiency.

The TiO2 hollow spheres (TiO2HS) were successfully prepared by a hydrothermal method and added to Vulcan XC-72 carbon black as the support materials for Pd nanoparticles. A facile approach to promote ethylene glycol (EG) electrooxidation in alkaline medium was carried out by the PdBi/TiO2HS-C catalyst. The results show that Pd and Bi nanoparticles are uniformly dispersed on the surface of carbon-doped TiO2 hollow spheres, the appropriate amount of Bi modification into Pd/TiO2HS-C catalyst can enhance remarkably the electrocatalytic activity for EG oxidation, in which the PdBi/TiO2HS-C (Pd:Bi = 1:0.1) catalyst exhibits excellent stability. The high electrochemical performance is attributed to the unique structure and high surface area of the TiO2HS, metal nanoparticles uniform distribution, the electronic effect between Pd and Bi as well as the bifunctional effect between metal nanoparticles and the support TiO2HS-C. The results obtained are significant for the development of new Pd-based TiO2HS-C electrocatalysts for alcohol fuel cells.

The high-energy oscillating electric current pulse (ECP) technology was introduced to relieve the residual stresses in the small AISI 1045 steel specimens treated by the pulsed-laser surface irradiation. The high-energy oscillating ECP stress relief experiments were conducted to study the effectiveness of the high-energy oscillating ECP technology. In addition, the electroplasticity framework was developed based on the thermal activation theory to reveal the mechanism of the high-energy oscillating ECP stress relief. The results show that the high-energy oscillating ECP stress relief has good effects on eliminating the residual stress. Furthermore, the residual stress relieving mechanism of the high-energy oscillating ECP stress relief can be attributed to the electric softening effect and the dynamic stress effect. The findings confirm that the significant effects of high-energy oscillating ECP on metal plasticity and provide a basis to understand the underlying mechanism of the high-energy oscillating ECP stress relief.

The high-frequency vibration technology was introduced to relieve the quenched residual stress in the Cr12MoV steel based on the high-frequency vibration system that mainly consisted of an electromagnetic vibrator and an amplitude boost unit. The high-frequency vibratory stress relief (VSR) experiments were conducted to study the effectiveness of the high-frequency vibration technology. In addition, the high-frequency vibration plasticity model was developed based on the thermal activation theory to reveal the mechanism of the high-frequency VSR. The results show that the high-frequency VSR has good effects on eliminating residual stress, while the surface hardness for the Cr12MoV steel remains almost the same. Moreover, there are no changes in the grain size of the Cr12MoV steel during the high-frequency VSR, while the dislocation density for the Cr12MoV steel during the high-frequency VSR decreases by 27.21%. The decrease of dislocation density in the Cr12MoV steel is the essence of residual stress relaxation. The findings confirm the significant effects of high-frequency vibration on metal plasticity and provide a basis to understand the underlying mechanism of the high-frequency VSR.

Introduction: The mortality of Parkinson’s disease (PD) and its associated risk factors among clinically definite PD patients in China has been rarely investigated. Our study aimed to identify the mortality rates and predictors of death in PD patients in China. Methods: 157 consecutive, clinically definite PD patients from the urban area of Shanghai were recruited from a central hospital based movement disorder clinic in 2006. All patients were regularly followed up at the clinic until December 31, 2011, or death. Mortality and associations with baseline demographics, health and medical factors were then determined within the cohort. Results: After 5 years, 11(7%) patients had died. The standardised mortality ratio was 0.62 (95% CI 0.32 to 1.07, P=0.104). The main causes of death were pneumonia (54.5%, 6/11) and digestive disorders (18.2%, 2/11), respectively. Age at onset, independent living, the mini mental state examination score, the Parkinson’s disease sleep scale score and the Epworth sleepiness scale score at baseline were statistically significantly different between the survival group and the deceased group (P<0.05). Across all participants, risk factors for death included low mini mental state examination score, and high Epworth sleepiness scale score according to a binary variable logistic regression analysis. Conclusions: This study confirms the similar survival of patients with PD to the control population up to a follow-up of 5 years. Interventions tailored to potential risk factors associated with death may offer further benefits.

Systemic Fe overload can contribute to abnormal glucose metabolism and the onset of type 2 diabetes (T2D). Although hepcidin is the master regulator of systemic Fe homeostasis, few studies have systematically evaluated the associations of serum hepcidin concentrations with Fe metabolism parameters and risks for the development of T2D. In this regard, whether hepcidin concentrations are associated with T2D remains controversial. We measured serum hepcidin and ferritin concentrations in a case–control study of 1259 Han Chinese participants to evaluate the possible associations of serum hepcidin concentrations with Fe metabolism parameters and risks of T2D. Individuals with diabetes (n 555) and control participants (n 704) were recruited and serum hepcidin and ferritin concentrations were quantified. Additionally, selected biochemical and anthropometric variables were determined. A logistic regression analysis was performed to evaluate the association of serum hepcidin and ferritin concentrations with T2D. A linear regression analysis was used to test for associations between serum hepcidin and ferritin concentrations and a number of clinical, demographic and diabetes-associated variables. We found that serum hepcidin concentrations correlated with Hb and serum ferritin concentrations. No differences in hepcidin concentrations were found between the group with diabetes and the control group. Hepcidin concentrations were not significantly correlated with T2D risk factors. We also found that serum ferritin concentrations were elevated in individuals with diabetes and were positively correlated with both Hb concentrations and T2D risk factors. The present findings suggest that serum ferritin concentrations correlate with T2D risk factors, while serum hepcidin concentrations are positively associated with Hb and serum ferritin concentrations, but do not correlate with T2D.

Visual navigation is comparatively advanced without a Global Positioning System (GPS). It obtains environmental information via real-time processing of the data gained through visual sensors. Compared with other methods, visual navigation is a passive method that does not launch light or other radiation applications, thus making it easier to hide. The novel navigation system described in this paper uses stereo-matching combined with Inertial Measurement Units (IMU). This system applies photogrammetric theory and a matching algorithm to identify the matching points of two images of the same scene taken from different views and obtains their 3D coordinates. Integrated with the orientation information output by the IMU, the system reduces model-accumulated errors and improves the point accuracy.