This work delves into advancements in wireless power transfer (WPT) and radiofrequency (RF) energy harvesting (EH), focusing on on-demand beamforming and wide-dynamic power range technologies. These innovations promise significant improvements in efficiency and adaptability for wireless energy systems. For transmitting RF power, on-demand beamforming enhances power delivery precision by accurately targeting specific devices, minimizing energy waste, and maximizing received power. This technology is particularly useful in dynamic environments with constantly changing device positions, ensuring stable power levels and effective real-time power transfer, such as for mobile device charging. For receiving RF power, wide-dynamic power range implementation allows EH and WPT systems to adjust power output across a broad spectrum, optimizing energy use and extending device lifespan. This capability supports scalability, accommodating devices with varied power needs, also enabling new applications in consumer electronics, healthcare, smart homes, and cities, and enhancing energy management in smart infrastructures. Additionally, this study explores three-dimensional (3D)-printable antennas and RF circuitries for battery-free applications. The versatility of 3D printing allows the creation of complex, efficient, and customizable RF components, fostering innovative battery-free solutions. Integrating on-demand beamforming and wide-dynamic power range technologies in EH systems promise improved energy transfer efficiencies, reduced losses, and sustainable, cost-effective wireless power systems.

Resonant Bessel-beam launchers (BBLs)are radiating devices constituted by a cylindrical metallic cavity with a partially reflecting sheet (PRS) on top. Millimeter-wave resonant BBLs typically exhibit transverse magnetic (TM) polarization due to the use of coaxial probes as feeders and homogenized metasurfaces as PRS. Launchers showing either a purely transverse electric (TE) or a hybrid (quasi-TE) polarization have recently been proposed for realizing wireless power transfer (WPT) links in the radiative near-field region at millimeter waves. The former are obtained by means of a radial slot array as a feeder and a homogenized metasurface as a PRS. The latter are obtained by using a loop antenna as a feeder and an annular strip grating in the homogenization limit as radiating aperture. In this work, based on an original semi-analytical model, such a metasurface is demonstrated to show a dichroic behavior. This interpretation explains the improvement in terms of polarization purity with respect to more nondichroic conventional homogenized metasurfaces. The behavior of the annular strip grating under a pure TM polarization is tested with a coaxial feeder, whereas its behavior under a pure TE polarization is tested by means of the radial slot array feeder. Results confirm the validity of the proposed analysis, which is finally exploited to evaluate the WPT performance.

The deployment of multi-insulator tunneling diodes has recently had more attention to be used as rectifiers in energy harvesting rectennas with good potentiality for a millimeter and terahertz range. However, with the rather complicated math to obtain the current–voltage relation, it is difficult to evaluate the design figures of merit (FOM)s such as asymmetry, nonlinearity, responsivity, and dynamic resistance and monitor the impact of changing physical parameters on them. This complicates the decision-making process for the required physical parameters. In this work, a heuristic optimization framework using genetic algorithm is suggested using the transfer matrix method to find the combination of physical parameters which satisfies the minimum required FOM set by users and weighted by their preference.

This paper discusses some significant design issues that are faced in resonant inductive system for wireless power transfer ‘on the move’. The targeted system adopts a single AC source to power a sequence of transmitting (Tx) coils, placed along the Rx path, whose geometry is optimized to minimize the variations of coupling for every possible Rx position. To retain a constant coupling coefficient, two nearby Tx coils are series-connected and simultaneously activated, establishing a path without any theoretical bound on its length, by a suitable switching network. This work analyzes the effects of asynchronous switching times, which are rigorously accounted for and minimized by a proper design of the compensating circuit elements, minimizing both the voltage spikes and the over currents on the coils, while keeping the system at resonance. A prototype operating at 6.78 MHz is built and experimental validations are carried out to verify the feasibility of a constant coupling link without experiencing the mentioned effects, but the adopted procedure is general and independent on its size or frequency.

An increasing interest is arising in developing miniaturized antennas in the microwave range. However, even when the adopted antennas dimensions are small compared with the wavelength, radiation performances have to be preserved to keep the system-operating conditions. For this purpose, magneto-dielectric materials are currently exploited as promising substrates, which allows us to reduce antenna dimensions by exploiting both relative permittivity and permeability. In this paper, we address generic antennas in resonant conditions and we develop a general theoretical approach, not based on simplified equivalent models, to establish topologies most suitable for exploiting high permeability and/or high-permittivity substrates, for miniaturization purposes. A novel definition of the region pertaining to the antenna near-field and of the associated field strength is proposed. It is then showed that radiation efficiency and bandwidth can be preserved only by a selected combinations of antenna topologies and substrate characteristics. Indeed, by the proposed independent approach, we confirm that non-dispersive magneto-dielectric materials with relative permeability greater than unit, can be efficiently adopted only by antennas that are mainly represented by equivalent magnetic sources. Conversely, if equivalent electric sources are involved, the antenna performances are significantly degraded. The theoretical results are validated by full-wave numerical simulations of reference topologies.

The design and characterization of a new broadband small patch antenna, based on an innovative magneto-dielectric material and suitable for wearable applications at 868 MHz, is presented. To reduce antenna dimensions, while preserving its radiation and matching performance, a barium-strontium hexaferrite Ba0.75Sr0.25Fe12O19 has been synthesized as the antenna substrate to achieve magnetic permeability double than vacuum in the band of interest. First material realization is characterized and dispersive permittivity and permeability behaviors are included in the design of a small patch antenna with a shorting-plate. A button-size realization is obtained and its suitability for wearable applications is numerically and experimentally demonstrated on body with and without the presence of conductive shielding. Very good agreement with measurements is demonstrated for both matching and radiation performance of the antenna.

The paper outlines an exhaustive computer-aided design (CAD) procedure for the circuit-level simulation of entire multi-input multi-output (MIMO) links. The multiple transmitting and receiving antennas are treated as multiport radiating systems characterized by electromagnetic (EM) analysis. The effects of mutual couplings in terms of the frequency-dependent near-field and far-field performance of each element are accounted for in a straightforward and rigorous way. The set of transmitters is treated as a unique non-linear system loaded by the multiport antenna, and is analyzed by non-linear circuit techniques. The same is done for the set of receivers. In order to establish the connection between transmitters and receivers, the radiated far-field is evaluated by EM analysis, and the field incident on each receiver antenna is computed by extending to the MIMO case an available ray tracing technique. EM theory is then used to describe the receiving array as a linear active multiport network. This technique allows analysis of several MIMO systems, exploiting different array element spatial locations and frequencies of operation in a straightforward and automatic way. Bit error rate (BER) computation and minimization are demonstrated at the circuit level.

We introduce an integrated design methodology for the optimization of RF-to-DC conversion efficiency of multi-band rectennas (rectifying antennas), with the aim of harvesting the RF energy available in humanized environments. Existing RF sources can either operate at known frequencies, power budgets, and locations, or can be ubiquitously available at different frequency bands, and with unknown directions of incidence and polarizations. In all cases, the RF link power budget may be extremely low. In order to harvest a significant quantity of energy, it is thus mandatory to place a very special care in the design of each part of the receiving/storing system. For this purpose, the receiving antenna must be optimized together with the rectifying circuit and the load. In our work, this is accomplished by a rigorous design tool based on the concurrent use of nonlinear/electromagnetic (EM) CAD tools and EM theory. The effectiveness of the method is demonstrated by comparing the computed and measured performance of single- and multi-band rectennas, both linearly and circularly polarized. Such antennas are designed to harvest RF energy from a variety of cellular and WiFi systems that are normally present in civil environments.