Understanding the physics of electromagnetic pulse (EMP) emission and nozzle damage is critical for the long-term operation of laser experiments with gas targets, particularly at facilities looking to produce stable sources of radiation at high repetition rates. We present a theoretical model of plasma formation and electrostatic charging when high-power lasers are focused inside gases. The model can be used to estimate the amplitude of gigahertz EMPs produced by the laser and the extent of damage to the gas jet nozzle. Looking at a range of laser and target properties relevant to existing high-power laser systems, we find that EMP fields of tens to hundreds of kV/m can be generated several metres from the gas jet. Model predictions are compared with measurements of EMPs, plasma formation and nozzle damage from two experiments on the VEGA-3 laser and one experiment on the Vulcan Petawatt laser.

The aneutronic 11B(p, α)2α fusion reaction driven by the interaction of high-energy lasers with matter has become a popular topic of research, since it represents a potential long-term goal alternative to the most studied deuterium-tritium reaction. However, the detection of the typical ionic products, especially alpha particles, of this low-rate fusion reaction is a challenging issue, due to their low flux. One of the diagnostic devices that can be implemented in laser-driven proton-boron fusion experiments is a Thomson spectrometer (TS), which is capable of detecting and discriminating ions according to their mass-to-charge ratio (A/Z, where A is the mass number and Z is the atomic number of the ions). In this work, we report on the ultimate test of a TS, which was designed and developed at the ENEA Research Centre in Frascati, Italy, in the context of a p + 11B fusion experiment. Our device—designed to have high sensitivity and a robust shielding against electromagnetic pulses (EMPs)—was implemented at the PALS laser facility (∼700 J in ∼350 ps pulses) at a distance of 367 mm from the laser-plasma interaction point. We analyse here the measured signals obtained with our device, focusing on the assessment of their signal-to-background ratio. Despite the presence of strong EMPs and background radiation at such a short distance from the laser-irradiated target, the TS proved to be suitable for effectively detecting protons and heavier ions stemming from the plasma source.

Porous materials have peculiar characteristics that are relevant for inertial confinement fusion (ICF). Among them, chemically produced foams are proved to be able to smooth the laser inhomogeneities and to increase the coupling of the laser with the target. Foams realized with other elements and techniques may prove useful as well for ICF applications. In this work, we explore the potential of a novel class of porous materials for ICF, namely, carbon nanofoams produced with the pulsed laser deposition (PLD) technique, by means of hydrodynamic numerical simulations. By comparison with a simulation of solid-density carbon, PLD nanofoams show a higher pressure at the shock front, which could make them potential good candidates as ablators for a capsule for direct-drive fusion.

The ability to quickly refresh gas-jet targets without cycling the vacuum chamber makes them a promising candidate for laser-accelerated ion experiments at high repetition rate. Here we present results from the first high repetition rate ion acceleration experiment on the VEGA-3 PW-class laser at CLPU. A near-critical density gas-jet target was produced by forcing a 1000 bar H$_2$ and He gas mix through bespoke supersonic shock nozzles. Proton energies up to 2 MeV were measured in the laser forward direction and 2.2 MeV transversally. He$^{2+}$ ions up to 5.8 MeV were also measured in the transverse direction. To help maintain a consistent gas density profile over many shots, nozzles were designed to produce a high-density shock at distances larger than 1 mm from the nozzle exit. We outline a procedure for optimizing the laser–gas interaction by translating the nozzle along the laser axis and using different nozzle materials. Several tens of laser interactions were performed with the same nozzle which demonstrates the potential usefulness of gas-jet targets as high repetition rate particle source.

The time-of-flight technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser–matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP shielding. Here we present a new advanced prototype of detector, developed at ENEA-Centro Ricerche Frascati (Italy), with a large-area (15 mm × 15 mm) polycrystalline diamond sensor having 150 μm thickness. The tailored detector design and testing ensure high sensitivity and, thanks to the fast temporal response, high-energy resolution of the reconstructed ion spectrum. The detector was offline calibrated and then successfully tested during an experimental campaign carried out at the PHELIX laser facility ( ${E}_L\sim$ 100 J, ${\tau}_L = 750$ fs, ${I}_L\sim \left(1{-}2.5\right)\times {10}^{19}$ W/cm2) at GSI (Germany). The high rejection to EMP fields was demonstrated and suitable calibrated spectra of the accelerated protons were obtained.

Large-amplitude electromagnetic radiofrequency fields are created by the charge-separation induced in interactions of high-intensity, short-pulse lasers with solid targets and have intensity that decreases with the distance from the target. Alternatively, it was experimentally proved very recently that charged particles emitted by petawatt laser–target interactions can be deposited on a capacitor-collector structure, far away from the target, and lead to the rapid (nanosecond-scale) generation of large quasi-static electric fields ($\mathrm{MV}/\mathrm{m}$), over wide regions. We demonstrate here the generation of both these fields in experiments at the PHELIX laser facility, with approximately $20\;\mathrm{J}$ energy and approximately ${10}^{19}\;\mathrm{W}/\mathrm{c}{\mathrm{m}}^2$ intensity, for picoseconds laser pulses, interacting with pre-ionized polymer foams of near critical density. Quasi-static fields, up to tens of kV/m, were here observed at distances larger than $1\;\mathrm{m}$ from the target, with results much higher than the radiofrequency component. This is of primary importance for inertial-confinement fusion and laser–plasma acceleration and also for promising applications in different scenarios.

Porous materials have many applications for laser–matter interaction experiments related to inertial confinement fusion. Obtaining new knowledge about the properties of the laser-produced plasma of porous media is a challenging task. In this work, we report, for the first time to the best of our knowledge, the time-dependent measurement of the reflected light of a terawatt laser pulse from the laser-produced plasma of low-Z foam material of overcritical density. The experiments have been performed with the ABC laser, with targets constituted by foam of overcritical density and by solid media of the same chemical composition. We implemented in the MULTI-FM code a model for the light reflection to reproduce and interpret the experimental results. Using the simulations together with the experimental results, we indicate a criterion for estimating the homogenization time of the laser-produced plasma, whose measurement is challenging with direct diagnostic techniques and still not achieved.

This study is a careful examination of the relationships between different components of the alexithymia construct and state versus trait anxiety. In order to study the relations between anxiety and alexithymia in a subclinical population, we administered to 125 female college students a test battery including measures of alexithymia (TAS26), state and trait anxiety (STAI) and depression (QD2A). Results indicated positive correlations between depression, anxiety (state and trait) and alexithymia scores. Partial correlations revealed a tight link between trait anxiety and alexithymia. Furthermore, in agreement with the view that alexithymia is a multidimensional construct, the various alexithymia dimensions were found to be diversely correlated with anxiety. On the basis of partial correlation analyses, a descriptive model of the relationships between depression, state anxiety, trait anxiety and alexithymia was postulated. This model was confirmed by pathways analyses.

Les AVP sont le principal pourvoyeur d’ESPT (Kupchik et al., 2007), dont la prévalence fluctue de 6 à 45 % entre les études (Heron-Delaney et al., 2013). En l’absence de repérage clinique, l’ESPT peut se chroniciser (Kessler et al., 1995). Les outils actuels permettent son diagnostic (Jackson et al., 2011), mais pas de dépister précocement les sujets à risque de développer un ESPT post-AVP en aigu (8 semaines) comme en chronique (6 mois) ou en tardif (1 an). Nous présentons une étude longitudinale réalisée sur 274 patients répartis sur 6 centres de traumatologie ayant pour objectif principal de valider un outil infirmier de dépistage précoce d’ESPT après un AVP (DEPITAC). Dix questions ont été soumises à tout patient hospitalisé dans les 15 jours après un AVP, ainsi qu’une PDI et un MINI DSM-IV. La PCL-S (cut-off à 44) a permis le diagnostic à 8 semaines, 6 mois et 1 an. L’analyse statistique a été réalisée avec le logiciel SAS Institute 9.4. Le score total DEPITAC était significativement associé au diagnostic d’ESPT à 1 an (OR : 1,43 ; IC95 % : 1,14–1,79) avec un pouvoir discriminant de 0,64 (IC95 % : 0,56–0,72). DEPITAC était corrélé à l’échelle PDI (p < 0,0001) avec un faible coefficient de corrélation (r = 0,32) montrant une faible redondance. Seules 3 questions après analyses bivariées s’avèrent significatives : « présence d’autres blessés ou décédés lors de l’AVP », « présence d’une dissociation post-AVP » et « s’être vu mourir lors de l’AVP » avec un pouvoir discriminant de 0,65 (IC95 % : 0,57–0,73). Aucun effet centre n’a été mis en évidence (p = 0,90). Nos résultats semblent montrer qu’à l’aide de seulement 3 questions de dépistage, les équipes infirmières pourraient repérer les patients à risque de développer un ESPT aigu ou tardif, leur permettant ainsi d’alerter précocement les équipes psychiatriques de liaison ou de pschotraumatologie.

Laser–plasma interactions have been studied in detail over the past twenty years, as they show great potential for the next generation of particle accelerators. The interaction between an ultra-intense laser and a solid-state target produces a huge amount of particles: electrons and photons (X-rays and $\unicode[STIX]{x03B3}$-rays) at early stages of the process, with protons and ions following them. At SPARC_LAB Test Facility we have set up two diagnostic lines to perform simultaneous temporally resolved measurements on both electrons and protons.

Giant electromagnetic pulses (EMP) generated during the interaction of high-power lasers with solid targets can seriously degrade electrical measurements and equipment. EMP emission is caused by the acceleration of hot electrons inside the target, which produce radiation across a wide band from DC to terahertz frequencies. Improved understanding and control of EMP is vital as we enter a new era of high repetition rate, high intensity lasers (e.g. the Extreme Light Infrastructure). We present recent data from the VULCAN laser facility that demonstrates how EMP can be readily and effectively reduced. Characterization of the EMP was achieved using B-dot and D-dot probes that took measurements for a range of different target and laser parameters. We demonstrate that target stalk geometry, material composition, geodesic path length and foil surface area can all play a significant role in the reduction of EMP. A combination of electromagnetic wave and 3D particle-in-cell simulations is used to inform our conclusions about the effects of stalk geometry on EMP, providing an opportunity for comparison with existing charge separation models.

The generalized theory of terawatt laser pulse interaction with a low-dense porous substance of light chemical elements including laser light absorption and energy transfer in a wide region of parameter variation is developed on the base of the model of laser-supported hydrothermal wave in a partially homogenized plasma. Laser light absorption, hydrodynamic motion, and electron thermal conductivity are implemented in the hydrodynamic code, according to the degree of laser-driven homogenization of the laser-produced plasma. The results of numerical simulations obtained by using the hydrodynamic code are presented. The features of laser-supported hydrothermal wave in both possible cases of a porous substance with a density smaller and larger than critical plasma density are discussed along with the comparison with the experiments. The results are addressed to the development of design of laser thermonuclear target as well as and powerful neutron and X-ray sources.

The development of high-intensity lasers has opened the field of nuclear reactions initiated by laser-accelerated particles. One possible application is the production of aneutronic fusion reactions for clean fusion energy production. We propose an innovative scheme based on the use of two targets and present the first results obtained with the ELFIE facility (at the LULI Laboratory) for the proton–boron-11 (p–11B) fusion reaction. A proton beam, accelerated by the Target Normal Sheat Acceleration mechanism using a short laser pulse (12 J, 350 fs, 1.056 µm, 1019 W cm−2), is sent onto a boron target to initiate fusion reactions. The number of reactions is measured with particle diagnostics such as CR39 track-detectors, active nuclear diagnostic, Thomson Parabola, magnetic spectrometer, and time-of-flight detectors that collect the fusion products: the α-particles. Our experiment shows promising results for this scheme. In the present paper, we discuss its principle and advantages compared with another scheme that uses a single target and heating mechanisms directly with photons to initiate the same p–11B fusion reaction.

The detailed description of the asymmetric magnetostatic field, used to confine a plasma in a typical electron cyclotron resonance set-up, and of the related resonance surface, associated with an electromagnetic wave feeding the source, has been obtained by means of exact expressions, employing complete elliptic integrals. This field representation is necessary in the studies regarding particles magnetically confined in these apparatuses.

Fish assemblages associated with shallow rocky bottoms along the coast of Cape Milazzo were investigated within three selected habitats, each represented by a different degree of complexity and namely vermetid reef (VR), rocky-algal reef (RR) and boulder and pebbles (BP). The area, located along the northern coast of Sicily (southern Tyrrhenian Sea) was studied by using a non-destructive diver visual census methodology evaluating species composition and abundance. A total of 39 fish taxa belonging to 15 families were recorded over the three habitats investigated. Multivariate and univariate approaches detected significant differences among the three habitats. These differences were either in fish assemblage structure, in the assemblage parameters or in the abundances of some common species. A multidimensional scaling performed on the entire fish density data set showed distinct groupings for the three habitats. The highest values of mean species richness (S), diversity (H′), evenness (J) and density (N) occurred over the more complex habitat, represented by VR, than over rocky-algal reef habitat or BP. Different habitat preferences were evidenced for several fish species. Diplodus sargus, Serranus scriba, Tripterygion tripteronotus, T. delaisi and T. melanurus were significantly more abundant over VR whereas Thalassoma pavo and Symphodus tinca were more abundant both over VR and BP habitats. Statistical comparison did not detect habitat preferences in Symphodus roissali, Oblada melanura, Diplodus vulgaris and Sarpa salpa. As far as the size is concerned, small, medium and large-sized specimens of D. sargus and only large-sized individuals of D. vulgaris were significantly more abundant over the VR habitat side than over the other two. These results suggest that differences in assemblage parameters are related to habitat structure. Greater habitat complexity means greater surface available, thus providing additional resources for adults and juveniles of many species: food, cavities, caves and then new niches, refuges from predation, from artisan fishery nets, as well as resting or mating sites, boosting the total number of individuals and species. The results of this study highlight the importance of VR in sustaining the biodiversity of fish assemblages and emphasize the need for their careful management in an area already proposed as a Site of Community Interest.