Few studies have examined the association of various types of Fe with colorectal cancer risk. The aim of this study was to investigate different forms and sources of Fe in relation to colorectal cancer risk in a Chinese population. A total of 2138 patients with colorectal cancer and 2144 sex- and age-matched (5-year interval) controls were recruited from July 2010 to November 2017. Dietary information was assessed by face-to-face interviews using a validated FFQ. Multivariable logistic regression was used to estimate the OR and 95 % CI on models. Intake of Fe from plants and Fe from white meat were inversely associated with the risk of colorectal cancer, while haem Fe and Fe from red meat were positively associated with colorectal cancer risk. The multivariable OR for the highest quartile v. the lowest quartile were 0·72 (95 % CI 0·59, 0·87, Ptrend<0·001) for Fe from plants, 0·54 (95 % CI 0·45, 0·66, Ptrend<0·001) for Fe from white meat, 1·26 (95 % CI 1·04, 1·53, Ptrend=0·005) for haem Fe and 1·83 (95 % CI 1·49, 2·24, Ptrend<0·001) for Fe from red meat intake, respectively. However, no significant association was found between the consumption of total dietary Fe, non-haem Fe, Fe from meat and colorectal cancer risk. This study showed that lower intake of Fe from plants and white meat, as well as higher intake of haem Fe and Fe from red meat, were associated with colorectal cancer risk in a Chinese population.

Identifying the relative importance of urban and non-urban land-use types for potential denitrification derived N2O at a regional scale is critical for quantifying the impacts of human activities on nitrous oxide (N2O) emission under changing environments. In this study we used a regional dataset from China including 197 soil samples and six land-use types to evaluate the main predictors (land use, heavy metals, soil pH, soil moisture, substrate availability, functional and broad microbial abundances) of potential denitrification using multivariate and pathway analysis. Our results provide empirical evidence that soils on farms have the greatest potential denitrifying ability (PDA) (10.92±6.08ng N2O-N·g–1 dry soil·min–1) followed by urban soil (6.80±5.35ng N2O-N·g–1 dry soil·min–1). Our models indicate that land use (low vs. high human activity), followed by total nitrogen (TN) and heavy metals (Cu, Zn, Pb, Cd) was the most important driver of PDA. In addition, our path analysis suggests that at least part of the impacts of land use on potential denitrification were mediated via microbial abundance, soil pH and substrates including TN, dissolved organic carbon and nitrate. This study identifies the main predictors of denitrification at a regional scale which is needed to quantify the impact of human activities on ecosystem functionality under changing conditions.

To produce pulses with good flat-top quality, pulse-forming lines (PFLs) have been widely used in the field of Tesla-type pulse generators. To shorten the physical length of the PFL, a double-width PFL (DWPFL) is proposed that doubles the output pulse width while maintaining flat-top quality. A repetitively 10 GW Tesla-type long-pulse generator producing pulses with flat-top width of about 110 ns was developed with a coaxial DWPFL to produce high-current electron beams. Electron beams of about 10 GW with flat-top widths of about 110 ns were obtained on a planar vacuum diode load. With this pulse generator and a C-band high-power microwave system, microwaves of ~2.2 GW power and full-width at half-maximum of 101 ns were generated. The experiment demonstrates the feasibility and ideal output waveform quality of the DWPFL.

A new minimally invasive surgical (MIS) robot consisting of a spherical remote center motion (RCM) mechanism with modular design is proposed. A multi-objective dimensional synthesis model is presented to obtain the excellent performance indices. There are four objectives: a global kinematic index, a compactness index, a global comprehensive stiffness index, and a global dynamic index. Other indices characterizing the design requirement, such as workspace, mechanical parameter, and mass, are chosen as constraints. A new decoupled mechanism is raised to solve the coupled motion between the linear platform and the four degrees of freedom (DoF) of surgical instrument as a result of post-driving motors. Another new mechanical decoupled method is proposed to eliminate the coupled motion between the wrist and the forceps, enhance the dexterity of surgical instrument, and improve the independence of each motor. Then, a 7-DoF MIS robotic prototype based on optimization results has been built up. Experiment results validate the effectiveness of the two mechanical decoupled methods. The position change of the RCM point, accuracy, and repeatability of the MIS robot meet the requirements of MIS. Successful animal experiments validate the effectiveness of the novel MIS robot.

Mycobacterial diseases are prevalent in cancer and rheumatoid arthritis (RA) patients, especially those receiving tumor necrosis factor-α inhibitor (TNFi). However, the impact of cancer development on the risk of mycobacterial diseases among RA patients is unknown. Data from the Taiwan National Health Insurance Research Database were used to conduct a retrospective study to assess the occurrence of mycobacterial diseases in RA patients developing cancer (cancer-positive), those using TNFi (TNFi-exposure), those with cancer and using TNFi (cancer-TNFi-comb), and those without cancer and not using TNFi (cancer-TNFi-free). Cancer and TNFi exposure were time-dependent, and independent risk factors of mycobacterial diseases were assessed by Cox regression. Among 1344 RA patients diagnosed during 2000–2013, 68 (5·1%) developed cancer before their end points. The incidence rates of mycobacterial diseases in the cancer-positive (n = 56), TNFi-exposure (n = 290), cancer-TNFi-comb (n = 12), and cancer-TNFi-free (n = 986) subgroups were 6·7, 2·0, 7·6, and 1·3 per 1000 person-years, respectively. As compared with the cancer-TNFi-free group, the risk for mycobacterial diseases increased for the TNFi-exposure group (adjusted HR = 3·6, 95% confidence interval (95% CI) 1·1–11·5, P = 0·032) and remained high for cancer-positive (adjusted HR = 14·6, 95% CI 3·3–63·7, P < 0·001) after adjustment. This study suggested that cancer development increased the risk of mycobacterial diseases in RA patients, and risk assessment for this subgroup should be considered.

Elderly individuals with tuberculosis (TB) are more likely to have a non-specific clinical presentation of TB and high mortality. However, factors associated with mortality in elderly TB patients have not been extensively studied. This retrospective cohort study aimed to identify factors associated with death among elderly Taiwanese with TB. All elderly patients with TB from 2006 to 2014 in Taipei, Taiwan, were included in a study. Multiple logistic regression was used to identify the factors associated with death in elderly TB patients. The mean age of the 5011 patients was 79·7 years; 74·1% were men; 32·7% had mortality during the study follow-up period. After controlling for potential confounders, age ⩾75 years (reference: 65–74 years), male sex, end-stage renal disease (ESRD), malignancy, acid-fast bacilli-smear positivity, TB-culture positivity, pleural effusion on chest radiograph and notification by an ordinary ward or intensive care unit were associated with a higher risk of all-cause death; while high school, and university or higher education, cavity on chest radiograph and directly observed therapy were associated with a lower risk of all-cause death. This study found that the proportion of death among elderly patients with TB in Taipei, Taiwan, was high. To improve TB treatment outcomes, future control programmes should particularly target individuals with comorbidities (e.g. ESRD and malignancy) and those with a lower socio-economic status (e.g. not educated).

Wake vortex evolution of a square cylinder with a slot synthetic jet issuing from the cylinder’s rear surface has been experimentally investigated using the time-resolved particle image velocimetry technique. The Reynolds number based on the side length of the square cylinder is $Re=836$ . The excitation frequency normalized by the natural shedding frequency $f_{e}/f_{0}$ varies from 0 to 6 at the dimensionless stroke length $L_{0}/w=72.6$ . The distributions of the time-averaged Reynolds stresses present significant differences as the excitation frequency increases. With control, the mean streamwise velocity deficit of the wake recovers more quickly in comparison with the natural case, and the vertical velocity fluctuation intensity becomes weaker. Moreover, a drag reduction can be achieved for the control cases, especially, for $f_{e}/f_{0}=4$ and $f_{e}/f_{0}=6$ , a thrust instead of drag reduction can be obtained. The profiles of the mean streamwise velocity tend to have jet-like distributions. The wake vortex dynamics and its evolution with the excitation frequency are revealed. (i) For the low excitation frequency cases ( $f_{e}/f_{0}=0.5$ , 1, 2), no significant changes in the dominant frequency and the spanwise vortex structures are observed in comparison with the natural case. (ii) For the moderate excitation frequency case ( $f_{e}/f_{0}=3$ ), the wake vortex shedding frequency is locked on half of the control frequency. In this case, the shear layer is divided into two parts by the synthetic jet vortex, and the wake vortices with smaller scales still shed asymmetrically and appear closer to the square cylinder. (iii) For the high excitation frequency case ( $f_{e}/f_{0}=6$ ), the flow is governed by the synthetic jet. As a result of strong perturbations of the synthetic jet, the wake vortex shedding becomes symmetric with the shedding frequency consistent with the control frequency. And the separation is suppressed effectively. The different control effects of the slot synthetic jet on a square cylinder and a circular cylinder are also compared in detail. Generally speaking, the circular cylinder is easier to be controlled due to its non-fixed separation points.

The dynamics of vortical structures in flow over a circular cylinder in the vicinity of a flat plate is investigated using particle image velocimetry (PIV). The cylinder is placed above the flat plate with its axis parallel to the wall and normal to the flow direction. The Reynolds number $Re_{D}$ based on the cylinder diameter  $D$ is 1072 and the gap  $G$ between the cylinder and the flat plate is varied from gap-to-diameter ratio $G/D=0$ to $G/D=3.0$ . The flow statistics and vortex dynamics are strongly dependent on the gap ratio $G/D$ . Statistics show that as the cylinder comes close to the wall ( $G/D\leqslant 2.0$ ), the cylinder wake becomes more and more asymmetric and a boundary layer separation is induced on the flat plate downstream of the cylinder. The wake vortex shedding frequency increases with decreasing $G/D$ until a critical gap ratio (about $G/D=0.25$ ) below which the vortex shedding is irregular. The deflection of the gap flow away from the wall and its following interaction with the upper shear layer may be the cause of the higher shedding frequency. The vortex dynamics is investigated based on the phase-averaged flow field and virtual dye visualization in the instantaneous PIV velocity field. It is revealed that when the cylinder is close to the wall ( $G/D=2.0$ ), the cylinder wake vortices can periodically induce secondary spanwise vortices near the wall. As the cylinder approaches the wall ( $G/D=1.0$ ) the secondary vortex can directly interact with the lower wake vortex, and a further approaching of the cylinder ( $G/D=0.5$ ) can result in more complex interactions among the secondary vortex, the lower wake vortex and the upper wake vortex. The breakdown of vortices into filamentary debris during vortex interactions is clearly revealed by the coloured virtual dye visualizations. For $G/D<0.25$ , the lower shear layer is strongly inhibited and only the upper shear layer can shed vortices. Investigation of the vortex formation, evolution and interaction in the flow promotes the understanding of the flow physics for different gap ratios.

Evolution of Lagrangian coherent structures (LCS) in a flat plate boundary layer transition induced by the wake of a circular cylinder is investigated. Both hydrogen bubble visualization and particle image velocimetry (PIV) techniques are used. It is found that downstream of the cylinder, the disturbance in the boundary layer experiences a fast growth followed by a slow decay in the transition. Lagrangian coherent structures are revealed by qualitative hydrogen bubble visualizations and quantitative finite-time Lyapunov exponents (FTLE) fields derived from the PIV data. The evolution of the LCS is considered from the very beginning of the transition up to when the boundary layer becomes fully developed turbulent flow. The mean convection velocity and average inclination angle of the LCS are first extracted from the FTLE fields. The streamwise length of the low-speed streaks seems to increase, while their spanwise distance decreases in the boundary layer transition. Proper orthogonal decomposition (POD) of the PIV data shows that low-speed streaks associated with the hairpin vortices and hairpin packets are the dominant coherent structures close to the wall in the transitional and turbulent boundary layer. The POD modes also reveal a variety of scales in the turbulent boundary layer. Moreover, it is found that large-scale coherent structures can modulate the amplitude of the small-scale ones.

Autophagy process in Toxoplasma gondii plays a vital role in regulating parasite survival or death. Thus, once having an understanding of certain effects of autophagy on the transformation of tachyzoite to bradyzoite this will allow us to elucidate the function of autophagy during parasite development. Herein, we used three TgAtg proteins involved in Atg8 conjugation system, TgAtg3, TgAtg7 and TgAtg8 to evaluate the autophagy level in tachyzoite and bradyzoite of Toxoplasma in vitro based on Pru TgAtg7-HA transgenic strains. We showed that both TgAtg3 and TgAtg8 were expressed at a significantly lower level in bradyzoites than in tachyzoites. Importantly, the number of parasites containing fluorescence-labelled TgAtg8 puncta was significantly reduced in bradyzoites than in tachyzoites, suggesting that autophagy is downregulated in Toxoplasma bradyzoite in vitro. Moreover, after treatment with drugs, bradyzoite-specific gene BAG1 levels decreased significantly in rapamycin-treated bradyzoites and increased significantly in 3-MA-treated bradyzoites in comparison with control bradyzoites, indicating that Toxoplasma autophagy is involved in the transformation of tachyzoite to bradyzoite in vitro. Together, it is suggested that autophagy may serve as a potential strategy to regulate the transformation.

Intra-uterine growth restriction (IUGR) impairs postnatal growth and skeletal muscle development in neonatal infants. This study evaluated whether dietary β-hydroxy-β-methylbutyrate Ca (HMB-Ca) supplementation during the early postnatal period could improve muscle growth in IUGR neonates using piglets as a model. A total of twelve pairs of IUGR and normal-birth-weight (NBW) male piglets with average initial weights (1·85 (sem 0·36) and 2·51 (sem 0·39) kg, respectively) were randomly allotted to groups that received milk-based diets (CON) or milk-based diets supplemented with 800 mg/kg HMB-Ca (HMB) during days 7–28 after birth. Blood and longissimus dorsi (LD) samples were collected and analysed for plasma amino acid content, fibre morphology and the expression of genes related to muscle development. The results indicate that, regardless of diet, IUGR piglets had a significantly decreased average daily weight gain (ADG) compared with that of NBW piglets (P<0·05). However, IUGR piglets fed HMB-Ca had a net weight and ADG similar to that of NBW piglets fed the CON diet. Irrespective of body weight (BW), HMB-Ca supplementation markedly increased the type II fibre cross-sectional area and the mRNA expression of mammalian target of rapamycin (mTOR), insulin-like growth factor-1 and myosin heavy-chain isoform IIb in the LD of piglets (P<0·05). Moreover, there was a significant interaction between the effects of BW and HMB on mTOR expression in the LD (P<0·05). In conclusion, HMB-Ca supplementation during the early postnatal period could improve skeletal muscle growth and maturity by accelerating fast-twitch glycolytic fibre development in piglets.

Mussels are typical macrofouling organisms in the world. In this study, the interaction between the settlement of Mytilus coruscus plantigrades and bacterial community on coloured substrata was determined. Bacterial communities in biofilms developed on seven coloured substrata were analysed by Illumina Miseq sequencing. The mussel settlement response to coloured substrata with no biofilms was also examined. Flavobacteria, Alphaproteobacteria and Gammaproteobacteria were the first, second and third most dominant groups in seven biofilm samples. The results suggest that the inducing activities of these biofilms on plantigrade settlement varied with coloured substrata and the lowest percentage of settlement was observed on biofilms on the green substratum. High-throughput sequencing showed that bacterial community in biofilms also changed with the substratum colour. No significant difference in the inducing activity on plantigrade settlement was observed between the coloured substrata with no biofilms. Thus, difference in plantigrade settlement response may be correlated to the changes in bacterial community on coloured substrata. This finding extends current knowledge of interaction among mussel settlement and bacterial community variability.

One-dimensional carbon nanomaterials (1-DCNMs), as one of the most promising one-dimension nanomaterials due to its unique microstructure, peculiar chemical, mechanical, thermal, and electronic properties, have long been considered as an important building block to construct micro-nano-electrics and devices. The growth controllability in direction, morphology and microstructure may provide a straightforward platform for fabricating high performance 1-DCNMs-based devices. Recently, electric and magnetic fields have emerged as key techniques to control the 1-DCNMs' growth direction, morphology and microstructure. In this paper, we focus explicitly on the 1-DCNMs preparations with assistance of a magnetic field, and the main problems that should be solved in the future are also discussed.

The need for higher energy density batteries has spawned recent renewed interest in alternatives to lithium ion batteries, including multivalent chemistries that theoretically can provide twice the volumetric capacity if two electrons can be transferred per intercalating ion. Initial investigations of these chemistries have been limited to date by the lack of understanding of the compatibility between intercalation electrode materials, electrolytes, and current collectors. This work describes the utilization of hybrid cells to evaluate multivalent cathodes, consisting of high surface area carbon anodes and multivalent nonaqueous electrolytes that are compatible with oxide intercalation electrodes. In particular, electrolyte and current collector compatibility was investigated, and it was found that the carbon and active material play an important role in determining the compatibility of PF6-based multivalent electrolytes with carbon-based current collectors. Through the exploration of electrolytes that are compatible with the cathode, new cell chemistries and configurations can be developed, including a magnesium-ion battery with two intercalation host electrodes, which may expand the known Mg-based systems beyond the present state of the art sulfide-based cathodes with organohalide-magnesium based electrolytes.

Surface properties affect the attachment of micro- and macroscopic marine organisms. The current study examined the settlement response of the mussel Mytilus coruscus plantigrades to natural biofilms formed on surfaces of different wettability. The percentages of plantigrade settlement were not influenced by the biofilms formed on variously wettable surfaces in the short term, but after 10 days, the plantigrade settlement rates decreased on biofilms formed on lower wettability surfaces. In general, lower wettability of the surfaces resulted in the decrease of the dry weight, bacterial and diatom density and the thickness of natural biofilms when compared to high wettability surfaces. In contrast, chlorophyll-a concentration in biofilms was independent of the initial wettability of the surfaces. Comparative cluster analysis of bacterial denaturing gradient gel electrophoresis patterns revealed that high variability existed between the bacterial community on high wettability surfaces and that on low wettability surfaces. Thus, surface wettability affects the formation of natural biofilms, and this variation in biofilms developed on different wettability surfaces may explain the discrepancy in their corresponding inducing activities on M. coruscus plantigrade settlement. This finding provides new insight into interactions between mussel settlement, biofilm characteristics and surface properties.

Fault tolerance is a very important issue for legged robots, especially in some harsh environments. One of the most fragile parts is the actuation system. There are two common faults of robot actuators: (1) the motor is locked and could not move anymore; (2) the motor is uncontrollable and can be treated as a passive joint. In this paper, we first discuss all fault combinations of a single leg of a hexapod walking robot with parallel-parallel mechanism topology. Then, the leg tolerable criterion is brought out, which defines whether a leg is fault tolerant. After that, the fault tolerance of the whole robot is researched, and we found that the robot can walk with one tolerable leg or two opposite tolerable legs. Finally, relative simulation results are given, which show the robot walk with one or two broken legs.

In this work, mechanical stability, thermodynamic and elastic properties of rhodium (Rh), rhodium monohydride (RhH), and the newly discovered rhodium dihydride (RhH2) under high temperature and pressure are studied by ab initio method together with quasiharmonic Debye model. Mechanical stability test indicates that RhH2 is no longer mechanically stable when pressure is higher than 22.7 GPa, which is quite less than the dynamically stable pressure (90 GPa). The heat capacity at constant volume (Cv) of Rh, RhH, or RhH2 increases proportional to T3 at low temperature, and tends to Dulong–Petit limit (about 241.67, 478.47, and 706.15 J/(kg·K), respectively). The thermal expansion coefficient (α) of Rh, RhH, and RhH2 increases acutely when temperature is not more than 300 K. And then, the increase of α slows down. The α reduces with pressure transiently. H atom's entering in fcc-Rh lattice would greatly change the electron density distribution, which would cause obvious difference in thermodynamic and elastic properties between Rh, RhH, and RhH2.

Carnitine has been reported to improve growth performance and reduce body lipid content in fish. Thus, we hypothesised that carnitine supplementation can improve growth performance and reduce lipid content in the liver and muscle of yellow catfish (Pelteobagrus fulvidraco), a commonly cultured freshwater fish in inland China, and tested this hypothesis in the present study. Diets containing l-carnitine at three different concentrations of 47 mg/kg (control, without extra carnitine addition), 331 mg/kg (low carnitine) and 3495 mg/kg (high carnitine) diet were fed to yellow catfish for 8 weeks. The low-carnitine diet significantly improved weight gain (WG) and reduced the feed conversion ratio (FCR). In contrast, the high-carnitine diet did not affect WG and FCR. Compared with the control diet, the low-carnitine and high-carnitine diets increased lipid and carnitine contents in the liver and muscle. The increased lipid content in the liver could be attributed to the up-regulation of the mRNA levels of SREBP, PPARγ, fatty acid synthase (FAS) and ACCa and the increased activities of lipogenic enzymes (such as FAS, glucose-6-phosphate dehydrogenase, 6-phosphogluconate dehydrogenase and malic enzyme) and to the down-regulation of the mRNA levels of the lipolytic gene CPT1A. The increased lipid content in muscle could be attributed to the down-regulation of the mRNA levels of the lipolytic genes CPT1A and ATGL and the increased activity of lipoprotein lipase. In conclusion, in contrast to our hypothesis, dietary carnitine supplementation increased body lipid content in yellow catfish.

The highly ordered mesoporous chromium–alumina catalysts (denoted as OMCA(x)) with different nAl/nCr ratios of 10 and 20 have been successfully synthesized via an evaporation-induced self-assembly (EISA) pathway associated with thermal treatment and were applied to the liquid phase oxidation of cyclohexane with hydrogen peroxide (H2O2) as an oxidant. For comparison studies, a chromium catalyst with the nAl/nCr ratio of 10 supported on an ordered mesoporous alumina support [denoted as Cr/OMA(10)] was also prepared by an incipient wetness impregnation (IWI) method. Although both kinds of catalysts retained a unidimensionally ordered mesoporous structure, textural properties of the catalysts were significantly affected by the preparation method. The characteristic results from XRD, N2 adsorption, TEM, UV-Vis, 27Al MNS NMR, and H2-TPR showed that the OMCA(x) catalysts exhibited much more highly ordered hexagonal mesostructure, narrower pore-size distribution, higher Brunauer-Emmett-Teller surface area and pore volume, and more homogeneous distribution of Cr species in mesoporous alumina framework in the form of tetrahedrally coordinated hexavalent Cr-oxide moieties than those of Cr/OMA(10) synthesized by an IWI method. In addition, in comparison with Cr/OMA(10), OMCA(x) catalysts showed higher catalytic activity and stability for the liquid phase oxidation of cyclohexane.