Lymph node tuberculosis is particularly common in regions with a high tuberculosis burden, and it has a great risk of rupture. This study aims to investigate the utility of ultrasound multimodal imaging in predicting the rupture of cervical tuberculous lymphadenitis (CTL). 128 patients with unruptured CTL confirmed by pathology or laboratory tests were included. Various ultrasonic image features, including long-to-short-axis ratio (L/S), margin, internal echotexture, coarse calcification, Color Doppler Flow Imaging (CDFI), perinodal echogenicity, elastography score, and non-enhanced area proportion in contrast-enhanced ultrasound (CEUS), were analyzed to determine their predictive value for CTL rupture within a one-year follow-up period. As a result, L/S (P < 0.001), margin (P < 0.001), internal echotexture (P < 0.001), coarse calcification (P < 0.001), perinodal echogenicity (P < 0.001), and the area of non-enhancement in CEUS (P < 0.001) were identified as significant imaging features for predicting CTL rupture. The prognostic prediction showed a sensitivity of 89.29%, specificity of 100%, accuracy of 95.31%, respectively. Imaging findings such as L/S < 2, unclear margin, heterogeneous internal echotexture, perinodal echogenicity changed, and non-enhancement area in CEUS > 1/2, are indicative of CTL rupture, while coarse calcification in the lymph nodes is associated with a favorable prognosis.

Widely distributed Mid-Neoproterozoic mafic rocks of the Qilian – Qaidam – East Kunlun region record the tectonic evolution of the northeastern Tibetan Plateau. This study presents whole-rock geochemistry, zircon U–Pb geochronology and Hf isotopes for the Xialanuoer gabbros of the central South Qilian Belt (SQB). Zircon laser ablation – inductively coupled plasma – mass spectrometry (LA-ICP-MS) U–Pb dating indicates that the gabbros were emplaced at ca. 738 Ma, indicating they are contemporaneous with mafic magmatism elsewhere in the northeastern Tibetan Plateau. The gabbros have low SiO2, Cr and Ni contents and Mg# values, are relatively enriched in light rare-earth elements (LREEs) and depleted in high-field-strength elements (HFSEs; e.g. Nb and Ta), have no positive Zr or Hf anomalies and have relatively high Nb/Ta but low Nb/La ratios. These data indicate that the Xialanuoer gabbros formed from calc-alkaline basaltic magmas that were originally generated by the partial melting of an enriched mantle of type-I (EMI-type) enriched region of the lithospheric mantle, underwent little to no crustal contamination prior to their emplacement, and have within-plate basalt geochemical affinities. Combining these data with the presence of widespread contemporaneous continental rift-related magmatism and sedimentation in the North Qilian, Central Qilian, South Qilian, Quanji, North Qaidam and East Kunlun regions suggests that the northeastern Tibetan Plateau underwent Mid-Neoproterozoic continental rifting, which also affected other Rodinian blocks (e.g. Tarim, South China, Australia, North America and Southern Africa).

Efficient photosynthesis requires a balance of ATP and NADPH production/consumption in chloroplasts, and the exportation of reducing equivalents from chloroplasts is important for balancing stromal ATP/NADPH ratio. Here, we showed that the overexpression of purple acid phosphatase 2 on the outer membranes of chloroplasts and mitochondria can streamline the production and consumption of reducing equivalents in these two organelles, respectively. A higher capacity of consumption of reducing equivalents in mitochondria can indirectly help chloroplasts to balance the ATP/NADPH ratio in stroma and recycle NADP+, the electron acceptors of the linear electron flow (LEF). A higher rate of ATP and NADPH production from the LEF, a higher capacity of carbon fixation by the Calvin–Benson–Bassham (CBB) cycle and a greater consumption of NADH in mitochondria enhance photosynthesis in the chloroplasts, ATP production in the mitochondria and sucrose synthesis in the cytosol and eventually boost plant growth and seed yields in the overexpression lines.

B vitamins (including folate, vitamin B2, vitamin B6 and vitamin B12) and methionine are essential for methylation reactions, nucleotide synthesis, DNA stability and DNA repair. However, epidemiological evidence among Chinese populations is limited. The objective of this study was to evaluate B vitamins and methionine in relation to colorectal cancer risk in a Chinese population. A case–control study was conducted from July 2010 to April 2019. A total of 2502 patients with colorectal cancer were recruited along with 2538 age- (5-year interval) and sex-matched controls. Dietary data were collected using a validated FFQ. Multivariable logistic regression was used to assess OR and 95 % CI. The intake of folate, vitamin B2, vitamin B6 and vitamin B12 was inversely associated with colorectal cancer risk. The multivariable OR for the highest quartile v. the lowest quartile were 0·62 (95 % CI 0·51, 0·74; Ptrend < 0·001) for folate, 0·46 (95 % CI 0·38, 0·55; Ptrend < 0·001) for vitamin B2, 0·55 (95 % CI 0·46, 0·76; Ptrend < 0·001) for vitamin B6 and 0·72 (95 % CI 0·60, 0·86; Ptrend < 0·001) for vitamin B12. No statistically significant association was found between methionine intake and colorectal cancer risk. Stratified analysis by sex showed that the inverse associations between vitamin B12 and methionine intake and colorectal cancer risk were found only among women. This study indicated that higher intake of folate, vitamin B2, vitamin B6 and vitamin B12 was associated with decreased risk of colorectal cancer in a Chinese population.

The effects of dietary vitamin D, Ca and dairy products intakes on colorectal cancer risk remain controversial. The present study investigated the association between these dietary intakes and the risk of colorectal cancer in Guangdong, China. From July 2010 to December 2018, 2380 patients with colorectal cancer and 2389 sex- and age-matched controls were recruited. Dietary intake data were collected through face-to-face interviews using a validated FFQ. Unconditional multivariable logistic regression models were used to calculate the OR and 95 % CI after adjusting for various confounders. Higher dietary vitamin D and Ca intakes were associated with 43 and 52 % reductions in colorectal cancer risk, with OR of 0·57 (95 % CI 0·46, 0·70) and 0·48 (95 % CI 0·39, 0·61), respectively, for the highest quartile (v. the lowest quartile) intakes. A statistically significant inverse association was observed between total dairy product intake and colorectal cancer risk, with an adjusted OR of 0·32 (95 % CI 0·27, 0·39) for the highest v. the lowest tertile. Subjects who drank milk had a 48 % lower risk of colorectal cancer than those who did not (OR 0·52, 95 % CI 0·45, 0·59). The inverse associations of dietary vitamin D, Ca, total dairy products and milk intakes with the risk of colorectal cancer were independent of sex and cancer site. Our study supports the protective effects of high dietary vitamin D, Ca and dairy products intakes against colorectal cancer in a Chinese population.

Quantifying reasonable crop yield gaps and determining potential regions for yield improvement can facilitate regional plant structure adjustment and promote crop production. The current study attempted to evaluate the yield gap in a region at multi-scales through model simulation and farmer investigation. Taking the winter wheat yield gap in the Huang-Huai-Hai farming region (HFR) for the case study, 241 farmers’ fields in four typical high-yield demonstration areas were surveyed to determine the yield limitation index and attainable yield. In addition, the theoretical and realizable yield gap of winter wheat in 386 counties of the HFR was assessed. Results showed that the average field yield of the demonstration plots was 8282 kg/ha, accounting for 0.72 of the potential yield, which represented the highest production in the region. The HFR consists of seven sub-regions designated 2.1–2.7: the largest attainable yield gap existed in the 2.6 sub-region, in the southwest of the HFR, while the smallest was in the 2.2 sub-region, in the northwest of the HFR. With a high irrigated area rate, the yield gap in the 2.2 sub-region could hardly be reduced by increasing irrigation, while a lack of irrigation remained an important limiting factor for narrowing the yield gap in 2.3 sub-region, in the middle of the HFR. Therefore, a multi-scale yield gap evaluation framework integrated with typical field survey and crop model analysis could provide valuable information for narrowing the yield gap.

The purpose of the study was to determine the incidence of cardiovascular disease (CVD) among people living with human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (PLWHA) in Taiwan. PLWHA were identified from the Taiwan Centers for Disease Control HIV Surveillance System between 2000 and 2014. To examine the effect of active antiretroviral therapy (HAART) on CVD incidence, incidence densities and standardised incidence rates (SIRs) of CVD were calculated after stratifying PLWHA by HAART. Of 26 272 PLWHA (mean age, 32.3 years) identified, 73.4% received HAART. Compared with general population, SIRs (95% confidence interval) were higher for incident coronary artery disease (1.11 (1.04–1.19)), percutaneous coronary intervention (1.32 (1.18–1.47)), coronary artery bypass surgery (1.47 (1.29–1.66)), sudden cardiac death (3.01 (2.39–3.73)), heart failure (1.50 (1.31–1.70)) and chronic kidney disease (1.95 (1.81–2.10)), but was lower for incident atrial fibrillation (0.53 (0.37–0.73)). Considering the effect of HAART on incident CVD, the SIRs for all-cause, ischaemic and haemorrhagic stroke were higher in PLWHA who did not receive HAART, but were lower in PLWHA who received HAART. PLWHA had higher risks of incident coronary artery disease, percutaneous coronary intervention, coronary artery bypass surgery, sudden cardiac death, heart failure and chronic kidney disease. HAART reduces risks of incident CVD in PLWHA.

A glacier system is regarded as the ensemble of many glaciers sharing the same region, influenced by a similar climate and organized by certain intrinsic laws. It can be either ‘sensitive’ or ‘steady’. On the basis of the structure of the glacier system and the nature of the equilibrium-line altitudes at the steady state, functional models of a glacier system responding to climate warming were established, using the Kotlyakov–Krenke equation relating annual glacier ablation and mean summer temperature and the glacier system’s median size. The modeling results under the climatic scenarios with a rate of temperature increase of 0.01, 0.03 and 0.05 K a-1 indicate that by the end of this century the glacial area of China will be reduced by –14%, –40%and –60% respectively. However, model results show distinct differences between the sensitive glacier system and the steady glacier system.

A CO2-pulsed laser plasma deposition (CO2-PLD) system is installed and used for the quick synthesis of various hexagonal boron nitride (h-BN) and zinc oxide (ZnO) nanostructures. Each part of the CO2-PLD system, such as focusing of laser beam on the target surface, sample holder, shutter, heater, type of the gas, and gas flow rate, can be easily controlled independently to fit different experimental conditions. After installation of the system, a series of experiments were conducted using hBN and ZnO targets. Scanning electron microscopy images showed that the entire surface (2 × 2 cm2) of the substrate is covered with the conical- and disk-shaped BN nanostructures and web-like highly dense ZnO nanowires, indicating a significantly short-time approach to grow mass product nanostructures. Raman spectroscopy identified the hexagonal structure of the synthesized samples.

There exist several kinds of definitions for complexity in different areas. In mechanical engineering area, some formulations capable of measuring the complexity of robotic architectures have been proposed at the conceptual-design stage. This paper presents the definition of Kinematic Coupling Complexity to measure the kinematic coupling degree of a manipulator based on the input/output velocity matrix. In order to distinguish the differences among many matrixes, three factors will be considered including the proportion of nonzero elements in matrix J, the difference of nonzero elements' numbers in every row among many matrixes, and the difference of nonzero elements' positions among many matrixes. To illustrate the methods introduced in this paper, four types of heavy-payload forging manipulators are analyzed and the type of forging manipulator with the smallest Kinematic Coupling Complexity is chosen as our prototype.

Progenies derived from rice (Oryza sativa ssp. japonica) plants pollinated by Oenothera biennis exhibited numerous morphological and developmental traits. Some variant individuals appeared in generation D2. From generations D3 to D6, a large number of variants were observed, showing distinct variable traits including giant embryos. Statistical analysis on D6 lines showed significant differences between progenies and their rice parental line in several main traits, including plant height (49.2–164.5 cm), panicle number (12.1–38.2), panicle length (20.3–30.3 cm), length of sword leaf (13.8–57.5 cm), leaf width (11.1–25.2 mm), grain number of main panicle (142.0–367.0), percentage of seed setting (0.8–99.0%), 1000-grain weight (19.7–33.8 g) and time from germination to panicle emergence (90.0–108.0 days). Most of the variable coefficients were above 20% (the highest was 40.8%). Through pedigree selection of these plants, genetically stable lines were obtained, which are useful for rice breeding. Results from amplified fragment length polymorphism (AFLP) analysis showed that several rice lines contained extensive genetic variations, which included disappearance of rice parental bands and/or appearance of novel bands.

A new 3C duct design method is proposed for designing a high quality, energy-efficiency cost-effective air duct system. It not only considers the demand of volume flow rate, but also takes into consideration a number of issues including system pressure balance, noise, vibration, space limitation and total system cost. This new method comprises three major calculation procedures: initial computer-aided design (CAD), computer-aided simulation (CAS) and correction processes (CP). An example is presented in this study to understand the characteristics of 3C method. It shows that 3C duct design method provides a simple computation procedure for an optimum air duct system. It also shortens the design schedule, prevents human calculation errors, and reduces the dependence on designer experience. In addition to apply in a new duct system design, 3C duct design method is also a powerful design tool for the expansion of an existing duct system.

We have made a comparative invetigation of the surface microstructures of epitaxially grown ferroelectric SrBi2Ta2O9, BaTiO3 films, and metallic SrRuO3 films, using scanning probe microscopy. Though their lattices (or pseudotetrogonal lattices) match closely with SrTiO3 (001) substrates, SPM results show very different surface microstructures. The surfaces of SrRuO3 films display atomically flat terraces of 90° oriented step edges. The size of steps is about 6 Å. The surface of BaTiO3 films deposited at various temperatures displays uniform rectangular islands. Different stages of SrBi2Ta2O9 epitaxial growth have been studied on thickness gradient films, which show clearly 2D nucleation and layer-by-layer growth, following a transition from 2D to 3D island growth. It finally develops into a surface exhibiting round hills consisting of curved terraces with size of steps ranging from 6 Å to 12.5 Å.