OBJECTIVES/GOALS: Despite efforts to improve COVID-19 health outcomes through testing and vaccination, SARS-CoV-2 has exacerbated health disparities in underserved populations. Through this study we examined socio-contextual factors impacting decisions to test for COVID-19 among Native Americans in the Flathead Reservation and Hispanics in the Yakima Valley. METHODS/STUDY POPULATION: A series of 28 key informant interviews and 6 focus groups (N=39 focus group participants) were completed with community and tribal leaders using an interview guide informed by the Theory of Planned Behavior, Social Cognitive Theory, and the Social Contextual Factor Frameworks. The interview guide was designed to examine the socio-contextual factors impacting decisions to test for COVID-19 among Native Americans and Hispanics in the Northwest. A codebook was developed to apply deductive coding to informant responses, followed by an inductive, constant comparison approach. Three analysts met to refine the codebook and conduct inter-rater agreement. RESULTS/ANTICIPATED RESULTS: Five themes (social, cultural, health, religious and political factors) were identified that impacted testing for COVID-19. For social factors, participants discussed the influence of families and friends and unfair employment practices influencing decisions to test. Cultural factors included deep rooted distrust for the government and historical trauma. Health factors participants reported included the importance of testing to save lives, distrust for medical system, and health communications around COVID-19 affecting decisions to test. There was some interaction between religious and political factors. While participants mentioned beliefs in putting things in God’s hands, some decisions to test seemed to be affected by their political views. DISCUSSION/SIGNIFICANCE: Several socio-cultural factors influence decisions to test for COVID-19. Understanding the community’s perception of COVID-19 testing is critical for successful implementation of preventive strategies.

OBJECTIVES/GOALS: The COVID-19 pandemic impacted health systems and exposed disparities in access to health care among underserved populations. We examined how the pandemic shaped social, mental, and physical health among Native American and Latino communities in rural and underserved areas. METHODS/STUDY POPULATION: Using Theory of Planned Behavior, Social Cognitive Theory, and Social Contextual Factor frameworks, we developed interview guides to examine perceptions of the COVID-19 pandemic on social, mental, and physical health among community members. Stakeholders of the Confederated Salish and Kootenai Tribes of the Flathead Reservation in Montana and the Hispanic/Latinx population in Yakima Valley in Washington were selected through purposeful community-engagement. A total of six focus group discussions and 30 key informant interviews were administered in both communities. A codebook was developed and deductive coding was applied to informant responses, followed by an inductive, constant comparison approach. The codebook was further refined and inter-rater agreement was completed by three analysts. RESULTS/ANTICIPATED RESULTS: Four themes were highlighted as areas impacted by the COVID-19 pandemic (mental and physical health, family dynamics, and social disruptions) with few differences among geographic areas or between focus group (n=39) and key informant (n=28) participants. Perceived impacts on mental health included increased stress, anxiety, and depression, while pandemic-related lifestyle or family changes impacted physical health. Participants reported changes to family routines and dynamics due to staying home, social distancing, and more frequent interactions inside or limited interactions outside the household respectively. Social distruptions reported included impacts on finances, employment, and household staples, though participants highlighted how many community members stepped up to help those in need. DISCUSSION/SIGNIFICANCE: The COVID-19 pandemic had similar impacts on two geographically distinct underserved communities in Montana and Washington. Understanding the community’s experience with the COVID-19 pandemic is critical to identify strategies to support families, community needs, and mental and physical health in underserved communities.

A controversy at the 2016 IUCN World Conservation Congress on the topic of closing domestic ivory markets (the 007, or so-called James Bond, motion) has given rise to a debate on IUCN's value proposition. A cross-section of authors who are engaged in IUCN but not employed by the organization, and with diverse perspectives and opinions, here argue for the importance of safeguarding and strengthening the unique technical and convening roles of IUCN, providing examples of what has and has not worked. Recommendations for protecting and enhancing IUCN's contribution to global conservation debates and policy formulation are given.

The peroxyformic process is based on the action of a carboxylic acid (mainly formic acid) and the corresponding peroxyacid. The influences of processing time (60–180 min), formic acid concentration (80–95%), temperature (60–80°C), and hydrogen peroxide concentration (2–4%) on peroxyformic pulping of agave leaves were studied by surface response methodology using a face-centered factorial design. Empirical models were obtained for the prediction of yield, κ number (KN) and pulp viscosity as functions of the aforementioned variables. Mathematical optimization enabled us to select a set of operational variables that produced the best fractionation of the material with the following results: pulp yield (26.9%), KN (3.6), and pulp viscosity (777 mL/g). Furthermore, this work allowed the description and evaluation of changes to the agave fibers during the fractionation process using different microscopic and spectroscopic techniques, and provided a comprehensive and qualitative view of the phenomena occurring in the delignification of agave fibers. The use of confocal and scanning electron microscopy provided a detailed understanding of the microstructural changes to the lignin and cellulose in the fibers throughout the process, whereas Raman spectroscopy and X-ray diffraction analysis indicated that cellulose in the pulp after treatment was mainly of type I.

The objective of this work was to obtain Spirulina (Arthrospira maxima) nanoparticles (SNPs) by using high-impact mechanical milling and to characterize them by electron microscopy and spectroscopy techniques. The milling products were analyzed after various processing times (1–4 h), and particle size distribution and number mean size (NMS) were determined by analysis of high-resolution scanning electron microscopic images. The smallest particles are synthesized after 3 h of milling, had an NMS of 55.6±3.6 nm, with 95% of the particles being smaller than 100 nm. High-resolution transmission electron microscopy showed lattice spacing of ~0.27±0.015 nm for SNPs. The corresponding chemical composition was obtained by energy-dispersive X-ray spectroscopy, and showed the presence of Ca, Fe, K, Mg, Na, and Zn. The powder flow properties showed that the powder density was higher when the average nanoparticle size is smaller. They showed free flowability and an increase in their specific surface area (6.89±0.23 m2/g) up to 12–14 times larger than the original material (0.45±0.02 m2/g). Fourier transform infrared spectroscopy suggested that chemical damage related to the milling is not significant.

Recently, the use of different types of natural fibers to produce paper and textiles from agave plants has been proposed. Agave atrovirens can be a good source of cellulose and lignin; nevertheless, the microstructural changes that happen during delignification have scarcely been studied. The aim of this work was to study the microstructural changes that occur during the delignification of agave fibers by means of microscopy techniques and image analysis. The fibers of A. atrovirens were obtained from leaves using convective drying, milling, and sieving. Fibers were processed using the Acetosolv pulping method at different concentrations of acetic acid; increasing acid concentration promoted higher levels of delignification, structural damage, and the breakdown of fiber clumps. Delignification followed by spectrometric analysis and microstructural studies were carried out by light, confocal laser scanning and scanning electron microscopy and showed that the delignification process follows three stages: initial, bulk, and residual. Microscopy techniques and image analysis were efficient tools for microstructural characterization during delignification of agave fibers, allowing quantitative evaluation of the process and the development of linear prediction models. The data obtained integrated numerical and microstructural information that could be valuable for the study of pulping of lignocellulosic materials.

Carbon nanotubes (CNT) have proven to be materials with great potential for the construction of biosensors. Development of fast, simple, and low cost biosensors to follow reactions in bioprocesses, or to detect food contaminants such as toxins, chemical compounds, and microorganisms, is presently an important research topic. This report includes microscopy and spectroscopy to characterize raw and chemically modified multiwall carbon nanotubes (MWCNTs) synthesized by chemical vapor deposition with the intention of using them as the active transducer in bioprocessing sensors. MWCNT were simultaneously purified and functionalized by an acid mixture involving HNO3–H2SO4 and amyloglucosidase attached onto the chemically modified MWCNT surface. A 49.0% decrease in its enzymatic activity was observed. Raw, purified, and enzyme-modified MWCNTs were analyzed by scanning and transmission electron microscopy and Raman and X-ray photoelectron spectroscopy. These studies confirmed purification and functionalization of the CNTs. Finally, cyclic voltammetry electrochemistry was used for electrical characterization of CNTs, which showed promising results that can be useful for construction of electrochemical biosensors applied to biological areas.

Skeletal muscle exhibits a remarkable flexibility in the usage of fuel in response to the nutrient intake and energy demands of the organism. In fact, increased physical activity and fasting trigger a transcriptional programme in skeletal muscle cells leading to a switch from carbohydrate to lipid oxidation. Impaired metabolic flexibility has been reported to be associated with obesity and type 2 diabetes, but it is not known whether the disability to adapt to metabolic demands is a cause or a consequence of these pathological conditions. Inasmuch as a poor nutritional environment during early life is a predisposing factor for the development of metabolic diseases in adulthood, in the present study, we aimed to determine the long-term effects of maternal malnutrition on the metabolic flexibility of offspring skeletal muscle. To this end, the transcriptional responses of the soleus and extensor digitorum longus muscles to fasting were evaluated in adult rats born to dams fed a control (17 % protein) or a low-protein (8 % protein, protein restricted (PR)) diet throughout pregnancy and lactation. With the exception of reduced body weight and reduced plasma concentrations of TAG, PR rats exhibited a metabolic profile that was the same as that of the control rats. In the fed state, PR rats exhibited an enhanced expression of key regulatory genes of fatty acid oxidation including CPT1a, PGC-1α, UCP3 and PPARα and an impaired expression of genes that increase the capacity for fat oxidation in response to fasting. These results suggest that impaired metabolic inflexibility precedes and may contribute to the development of metabolic disorders associated with early malnutrition.