Benghal dayflower and sicklepod are weeds of economic importance in peanut in the southeastern United States due to their extended emergence pattern and limited effective herbicides for control. Field studies were conducted near Jay, Florida, in 2022 and 2023, to evaluate the effect of planting date and herbicide combinations on Benghal dayflower and sicklepod control in peanut crops. Peanut planted in June was exposed to a higher Benghal dayflower density than peanut planted in May. Sicklepod density was similar between May and June planting dates at 28 d after preemergence and early postemergence herbicide applications, but density was greater in peanut that was planted in June, 28 d after the mid-postemergence application. A preemeergence herbicide application followed by (fb) an early postemergence application of S-metolachlor or diclosulam + S-metolachlor controlled Benghal dayflower 84% to 93% 28 d after early postemergence in peanut that was planted in May, but control was reduced to 58% to 78% in the crop that had been planted in June. Regardless of planting date, a preemeergence application fb S-metolachlor or diclosulam + S-metolachlor applied early postemergence provided <80% sicklepod control 28 d after early postemergence. Imazapic + dimethenamid-P + 2,4-DB applied postemergence improved Benghal dayflower control to at least 94% 28 d after mid-postemergence, but sicklepod control was not >85%. Regardless of the planting date, paraquat + bentazon + S-metolachlor applied early postemergence was required to achieve ≥95% sicklepod control. However, herbicide combinations that included paraquat + bentazon + S-metolachlor reduced peanut yield when planting was delayed to June. In fields that are infested with Benghal dayflower and sicklepod, it is recommended that peanut be planted in early May to minimize the potential impact of these weeds and to increase peanut yield. Late-planted peanut required more intensive herbicide applications to obtain the same peanut yield as the May-planted peanut.

Sicklepod is one of the most difficult to control weeds in peanut production in the southeastern United States due to its extended emergence pattern and limited effective herbicides for control. Growers rely on preemergence herbicides as the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objectives of this study were to evaluate the effect of planting pattern and herbicide combinations for sicklepod control in peanut crops. Due to rapid canopy closure, twin-row planting improved late-season sicklepod control by 13% and peanut yield by 5% compared with a single-row pattern. A preemergence application of fluridone, flumioxazin, or fluridone + flumioxazin provided 76% to 89% control of sicklepod 28 d after preemergence. Regardless of the herbicide applied preemergence, paraquat + bentazon + S-metolachlor applied early postemergence was required to achieve ≥90% sicklepod control 28 d after early postemergence. All preemergence herbicide treatments followed by (fb) S-metolachlor or diclosulam + S-metolachlor applied early postemergence provided <90% control 28 d after early postemergence. A mid-postemergence application of imazapic + dimethenamid-P + 2,4-DB controlled sicklepod by 67% to 79% prior to peanut harvest, and biomass reduction was unacceptable (<80%), resulting in difficulty in peanut digging. The highest peanut yield was observed when paraquat + bentazon + S-metolachlor was applied early postemergence fb imazapic + dimethenamid-P + 2,4-DB applied mid-postemergence. Based on the results of this study, a herbicide combination of paraquat + bentazon + S-metolachlor is an important early-season tool for controlling sicklepod in peanut crops. The results also showed that a twin-row planting pattern improved late-season sicklepod control but did not reduce herbicide input to protect peanut yield.

Targeted spraying application technologies have the capacity to drastically reduce herbicide inputs, but to be successful, the performance of both machine vision–based weed detection and actuator efficiency needs to be optimized. This study assessed (1) the performance of spotted spurge recognition in ‘Latitude 36’ bermudagrass turf canopy using the You Only Look Once (YOLOv3) real-time multiobject detection algorithm and (2) the impact of various nozzle densities on model efficiency and projected herbicide reduction under simulated conditions. The YOLOv3 model was trained and validated with a data set of 1,191 images. The simulation design consisted of four grid matrix regimes (3 × 3, 6 × 6, 12 × 12, and 24 × 24), which would then correspond to 3, 6, 12, and 24 nonoverlapping nozzles, respectively, covering a 50-cm-wide band. Simulated efficiency testing was conducted using 50 images containing predictions (labels) generated with the trained YOLO model and by applying each of the grid matrixes to individual images. The model resulted in prediction accuracy of an F1 score of 0.62, precision of 0.65, and a recall value of 0.60. Increased nozzle density (from 3 to 12) improved actuator precision and predicted herbicide-use efficiency with a reduction in the false hits ratio from ∼30% to 5%. The area required to ensure herbicide deposition to all spotted spurge detected within images was reduced to 18%, resulting in ∼80% herbicide savings compared to broadcast application. Slightly greater precision was predicted with 24 nozzles but was not statistically different from the 12-nozzle scenario. Using this turf/weed model as a basis, optimal actuator efficacy and herbicide savings would occur by increasing nozzle density from 1 to 12 nozzles within the context of a single band.

Carrier water quality is an important consideration for herbicide efficacy. Field and greenhouse studies were conducted from 2021 to 2023 to evaluate the effect of carrier water pH and hardness on imazapic efficacy for sicklepod control in peanut crops. In separate field experiments imazapic was applied postemergence at 0.071 kg ai ha−1 with carrier water pH levels of 5, 6, 7, 8, or 9; and hardness levels of 0 (deionized water), 100, 200, 400, or 500 mg L−1 of CaCO3 equivalent. In greenhouse experiments, imazapic was applied to sicklepod that was either 10 cm, 15 cm, or 20 cm tall at similar carrier water pH levels and hardness levels of 0, 100, 200, 400, or 800 mg L−1 of CaCO3. In the field study, sicklepod control, density, and biomass reductions were lower with carrier water pH 5 or 9 compared with pH 7. In the greenhouse study, control was not different among carrier water pH levels when imazapic was applied to 10-cm-tall sicklepod; however, when applied to 15- or 20-cm-tall sicklepod, control was at least 25% greater with acidic (pH 5) compared to alkaline (pH 9) carrier water. Results from the field study showed that carrier water hardness ≤500 ppm did not reduce the efficacy of imazapic to control sicklepod. In the greenhouse study, regardless of sicklepod height, carrier water hardness of 800 mg L−1 reduced sicklepod control by 15% and biomass reduction by 17% compared with deionized water (pH 7). The effects of carrier water pH and hardness on imazapic efficacy did not compromise peanut yield in the field study. However, this study indicates that both acidic and alkaline carrier water pH and hardness (800 mg L−1 CaCO3 L−1) have the potential to reduce imazapic efficacy on sicklepod, and appropriate spray solution amendments maybe be needed to maintain optimum efficacy.

Herbicides are the primary tool for controlling weeds in peanut (Arachis hypogaea L.) and are crucial to sustainable peanut production in the United States. The literature on chemical weed management in peanut in the past 53 yr (1970 to 2022) in the United States was systematically reviewed to highlight the strengths and weaknesses of different herbicides and identify current research gaps in chemical weed management. Residual weed control in peanut is achieved mainly with dimethenamid-P, ethalfluralin, pendimethalin, and S-metolachlor. More recently, the use of the protoporphyrinogen oxidase inhibitor flumioxazin and acetolactate synthase inhibitors, such as diclosulam, for residual weed control in peanut has increased considerably. Postemergence broadleaf weed control in peanut is achieved mainly with acifluorfen, bentazon, diclosulam, imazapic, lactofen, paraquat, and 2,4-DB, while the graminicides clethodim and sethoxydim are the major postemergence grass weed control herbicides in peanut. Although several herbicides are available for weed control in peanut, no single herbicide can provide season-long weed control due to limited application timing, lack of extended residual activity, variability in weed control spectrum, and rotational restrictions. Therefore, effective weed management in peanut often requires herbicide mixtures and/or sequential application of preplant-incorporated, preemergence, and/or postemergence herbicides. However, the available literature showed a substantive range in herbicide efficacy due to variations in environmental conditions and flushes of weed germination across years and locations. Despite the relatively high efficacy of herbicides, the selection of herbicide-resistant weeds is another area of increasing concern. Future research should focus on developing new strategies for preventing or delaying the development of resistance and improving herbicide efficacy within the context of climate change and emerging constraints such as water shortages, rising temperatures, and increasing CO2 concentration.

Weed interference is a major factor that reduces peanut (Arachis hypogaea L.) yield in the United States. Peanut growers rely heavily on herbicides for weed control. Although effective, herbicides are not a complete solution to the complex challenge that weeds present. Therefore, the use of nonchemical weed management options is essential. The literature on weed research in peanut in the past 53 yr in the United States was reviewed to assess the achievements and identify current research gaps and prospects for nonchemical weed management for future research. More than half (79%) of the published studies were from the southeastern United States. Most studies (88%) focused on weed management, while fewer studies (12%) addressed weed distribution, ecology, and competitive mechanisms. Broadleaf weeds were the most frequently studied weed species (60%), whereas only 23% and 19% of the published studies were relevant to grasses and Cyperus spp., respectively. Seventy-two percent of the published studies focused on curative measures using herbicides. Nonchemical methods using mechanical (5%) and preventive (13%) measures that influence crop competition and reduce the buildup of the weed seedbank, seedling recruitment, and weed seed production have received less attention. In most studies, the preventive weed management measures provided weed suppression and reduced weed competition but were not effective enough to reduce the need for herbicides to protect peanut yield. Therefore, future research should focus on developing integrated weed management strategies based on multiple preventive measures rather than one preventive measure combined with one or more curative measures. We recommend that research on mechanical weed management should focus on the role of cultivation when integrated with currently available herbicides. For successful weed management with lasting outcomes, the dominant weed communities of specific target locations should be addressed within the context of climate change and emerging constraints rather than focusing on single problematic species.

Dissipation of S-metolachlor, a soil-applied herbicide, on organic and mineral soils used for sugarcane production in Florida was evaluated using field studies in 2013 to 2016. S-metolachlor was applied PRE at 2,270 g ha−1 on organic and mineral soils with 75% and 1.6% organic matter, respectively. The rate of dissipation of S-metolachlor was rapid on mineral soils compared with organic soils. Dissipation of S-metolachlor on organic soils followed a negative linear trend resulting in half-lives (DT50) ranging from 50 to 126 d. S-metolachlor loss on organic soils was more rapid under high soil-moisture conditions than in corresponding low soil-moisture conditions. On mineral soils, dissipation of S-metolachlor followed an exponential decline. The DT50 of S-metolachlor on mineral soils ranged from 12 to 24 d. The short persistence of S-metolachlor on mineral soils was likely attributed to low organic matter content with limited adsorptive capability. The results indicate that organic matter content and soil moisture are important for persistence of S-metolachlor on organic and mineral soils used for sugarcane production in Florida.

Field studies were conducted on organic soils in Belle Glade, FL, in 2016 to 2017 to evaluate sugarcane tolerance and fall panicum control with topramezone applied alone or in combination with triazine herbicides (atrazine, metribuzin, ametryn). Treatments included topramezone (25 and 50 g ai ha−1) applied alone or in combination with atrazine (2,240 g ai ha−1), metribuzin (2,240 g ai ha−1), and ametryn (440 g ha−1) on four plant cane varieties to evaluate tolerance, and on second ratoon fields to determine efficacy on fall panicum control. Topramezone applied alone had no effect on sugarcane chlorophyll fluorescence (i.e., the ratio of variable fluorescence to maximum fluorescence), total chlorophyll, and carotenoid 7 to 28 d after treatment (DAT), suggesting sugarcane tolerance. Significant reduction of these parameters occured 7 to 14 DAT when topramezone (50 g ai ha−1) was applied with ametryn or metribuzin; however, reductions were not detected thereafter, indicating recovery. Sugarcane yield was not affected by topramezone applied alone or in combination with the triazine herbicides. Topramezone (50 g ai ha−1) plus metribuzin resulted in acceptable control of fall panicum (84%) with limited to no regrowth of meristematic tissue at sugarcane canopy closure, equivalent to 56 to 70 DAT. These results indicate that when sequential applications of topramezone, applied alone or in combination with these triazine herbicides, are required for efficacious weed control, topramezone applications alone can be made after 7 d, whereas the combinations can be made after 14 or 21 d, depending on sugarcane sensitivity.

Zoysia germplasm exhibit different levels of sensitivity to fluazifop-P-butyl, but the genetic factors responsible for such differences are unknown. Segregation patterns of the fluazifop-P-butyl tolerance trait were studied under greenhouse conditions. In total, 244 F1 lines were generated from multiple crosses between the tolerant line 5337-2 (non–target site tolerance) and three more-sensitive lines (123, 252, and 5330-23). Progeny segregation showed that fluazifop-P-butyl tolerance within zoysiagrass (Zoysia spp.) is expressed as a quantitative trait with a wide range of intermediate phenotypes between parental phenotypes. Transgressive segregation was extensive and largely favored susceptibility in most families, but was especially evident for 5337-2 × 123 and 5337-2 × 5330-23. The segregation patterns for biomass reduction and percent injury were different within reciprocal crosses and among three different family crosses. Reciprocal effects were observed in growth reduction for 5337-2 × 5330-23, in percent injury at 3 wk after the treatment (WAT), and for 5337-2 × 252 at 6 WAT. This indicated that fluazifop-P-butyl tolerance was not completely controlled by nuclear genetic factors in 5337-2 and maternal/cytoplasmic inheritance was also partially responsible. These results suggested that fluazifop-P-butyl tolerance may be attributed to multiple genetic mechanisms, which could present a challenge for future breeding efforts because of the difficulty of fixing multiple traits within a breeding population.

Breeding herbicide tolerance into new cultivars can improve safety and weed control in turfgrass systems. The sensitivity to fluazifop-P-butyl of 27 zoysiagrass (Zoysia spp.) lines was screened under greenhouse conditions to identify potential tolerant germplasm for breeding programs. The herbicide rate that caused 50% biomass reduction (GR50) and the rate that caused 50% injury (ID50) were calculated to select the three most-tolerant and the five most-susceptible lines for studying the physiological mechanisms responsible for fluazifop-P-butyl tolerance. The differences in GR50 and ID50 between susceptible and tolerant lines ranged from 4-fold to more than 10-fold. Cytochrome P450–mediated metabolism was not detected in fluazifop-P-butyl–tolerant lines. Sequencing of the ACCase gene confirmed that none of the seven previously reported mutations conferring resistance to acetyl-CoA carboxylase (ACCase)-inhibiting herbicides in other species were present in any of the tolerant or susceptible zoysiagrass lines studied. An Ala-2073-Thr substitution was identified in two tolerant lines, but this mutation did not completely explain the tolerant phenotype. No clear differences in absorption and translocation rates of 14C-radiolabeled fluazifop-P-butyl were observed among most lines, with the exception of a susceptible line that exhibited greater translocation than two of the tolerant lines. Metabolite profiles did not differ between tolerant and susceptible lines. Our results suggest that the diversity in tolerance to fluazifop-P-butyl in zoysiagrass germplasm is most likely the result of a combination of different, minor, additive non–target site mechanisms such as translocation rate and compartmentation after absorption.

Common reed [Phragmites australis (Cav.) Trin. ex Steud.], an aggressive invader in North American wetlands, is likely to undergo a range expansion as the climate changes. Increased atmospheric [CO2] and temperature have been shown to cause morphological and physiological changes in many species, sometimes altering the way they respond to herbicides. To understand how climate-related environmental parameters may impact P. australis management, we grew two P. australis haplotypes (the Gulf Coast type and the Eurasian type) under ambient (400 ppm CO2, 32/21 C) or elevated (650 ppm CO2, 35/24 C) climate conditions. After 6 wk, the Gulf Coast type had reduced leaf area, increased stomatal conductance, and increased transpiration under the elevated conditions. The Eurasian type had lower Vcmax (the maximum carboxylation rate of Rubisco) and lower Jmax (the maximum electron transport rate of RuBP regeneration) under elevated climate conditions. Results likely reflected a greater impact of higher temperatures rather than increased [CO2]. After the 6-wk period, plants were either treated with glyphosate (0.57 kg ae ha−1) or remained an untreated control. Data were collected 30 d after treatment (DAT) and 60 DAT to evaluate herbicide efficacy. Overall, the Gulf Coast type was less responsive to glyphosate applications under the elevated climate conditions than under current climate conditions. The lower leaf area of the Gulf Coast type in these climate conditions may have resulted in less herbicide interception and uptake. Glyphosate efficacy was less impacted by climate treatment for the Eurasian type than for the Gulf Coast type.

Sugarcane growers in Florida have been reporting reduced control of fall panicum with asulam, the main herbicide used for POST grass control. Therefore, outside container experiments were conducted to determine the response of four fall panicum populations from Florida to asulam applied alone and to evaluate whether tank-mix combination with trifloxysulfuron enhances control. Asulam was applied at 230 to 7,400 g ai ha−1, corresponding to 1/16 to 2X the maximum labeled rate for a single application in sugarcane, with or without combination with trifloxysulfuron at 16 g ai ha−1. Three fall panicum populations were collected from fields in which reduced control had been reported, while one population was from a field not used for sugarcane production but adjacent to a sugarcane field. The potency of asulam based on ED50 values (the rate required to cause 50% dry weight reduction at 28 d after treatment) ranged from 2,249 to 5,412 g ha−1 for tolerant populations with reported reduced fall panicum control compared with 1,808 g ha−1 for the susceptible population from the field not used for sugarcane production, showing that the latter was most sensitive to asulam. Addition of trifloxysulfuron to asulam increased potency on fall panicum by 5- to 15-fold, indicating that the tank mix enhanced dry weight reduction for all populations. The probability of fall panicum survival (regrowth after aboveground biomass harvesting) at the labeled rate of asulam ranged from 2% to 47% compared with 0% to 6% when trifloxysulfuron was added to the tank mix. Our results show differential response of fall panicum populations in Florida to asulam, which can be overcome by tank mixing with trifloxysulfuron even for populations that are difficult to control in sugarcane, but no evolution of resistance to asulam.

Cogongrass is commonly found in disturbed areas in Florida, where it is increasingly becoming a problem in bahiagrass pastures. Soil pH has been suggested as a possible mechanism for this invasion; to evaluate this, replacement series competition studies were conducted under greenhouse conditions at two soil pH levels: pH 4.5, or pH 6.8. Cogongrass ramets and bahiagrass seedlings were planted at proportions of 0:40, 1:20, 2:10, 4:1, and 8:0, respectively. Aboveground biomass was measured after 8 weeks and used to calculate relative yield, relative crowding coefficients, and aggressivity values. At soil pH 4.5, the relative competitiveness of cogongrass and bahiagrass was similar, with both species contributing equally to relative yield. At soil pH 6.8, bahiagrass seedlings showed greater competitive ability than cogongrass ramets. Relative crowding coefficient and aggressivity values supported this, with bahiagrass showing increased competitiveness under higher soil pH. This indicates that decreases in soil pH, often associated with poor soil fertility, is likely a contributing factor for cogongrass invasion into bahiagrass pastures. Soil amendments to raise pH may provide a cultural management tool for cogongrass infestations in pastures.

Weed scientists regularly attend conferences, symposiums, and workshops to communicate with colleagues about their current weed research programs. Communication of research can be hindered by poor visual aids. Computer programs, film recorders, and color printers have greatly increased the ease of visual aid production but have also increased the opportunity to prepare incomprehensible presentations. The size of the text, the amount of information presented, and the contrast between the text color and background color are the most important factors that affect the legibility of visual aids. Text, tables, and graphs should be short, simple, and legible. Computers and film recorders are not essential to produce good visual aids. The greatest assets in the production of visual aids are common sense, familiarity with the production equipment, sufficient preparation time, and critical assessment of the visual aids well in advance of the presentation date.

Laboratory studies were conducted to determine the effect of various factors on germination of dogfennel and yankeeweed. Dogfennel seed were found to be strongly photoblastic with no germination in the dark. Yankeeweed seed were moderately photoblastic, with 12% germination occurring in the absence of light Germination for both species increased in response to red light (650 nm), indicating phytochrome regulation. At the soil surface, dogfennel and yankeeweed emergence was 40 and 48%, respectively, but declined rapidly with increasing soil depths where dogfennel germination was lower than that of yankeeweed. Yankeeweed germination was 60 to 75% from 10 to 30 C while dogfennel germination was 45 to 70% between 15 to 30 C. Both species germinated over a broad range of pH (6 to 10) with the highest germination occurring at pH 8. Yankeeweed and dogfennel were moderately tolerant to water stress, but yankeeweed tolerated higher water stress than dogfennel. Both species germinated over a wide range of conditions, possibly enhancing adaptation to many diverse environments.

In field studies effective dogfennel control was obtained with glyphosate, dicamba + 2,4-D, triclopyr + 2,4-D, and fluroxypyr at rates of 1.68, 0.44 + 1.25, 0.56 + 1.12, and 0.28 kg ai/ha, respectively, applied after dogfennel was 75 cm tall. Mowing alone reduced dogfennel regrowth by 81% and when combined with dicamba + 2,4-D or triclopyr + 2,4-D regrowth was reduced over 94%. Triclopyr, dichlorprop, and sulfometuron also controlled dogfennel greater than 90% but metsulfuron did not.

Field studies were conducted near Sparr, FL, in 2001 and 2002 to evaluate the response of ‘Valencia 102’ grown for the green peanut market (or boiling peanut) to preemergence (PRE) and postemergence (POST) applications of herbicides registered for dry peanut production (roasted market). Green peanut exhibited excellent tolerance to most PRE and POST treatments. There was minimal injury (8%) from flumioxazin applications when evaluated early season in both years, and peanut quickly recovered. Norflurazon caused chlorosis to peanut foliage (23%) in both years. Yield reduction was observed in 2001 for flumioxazin (15%), metolachlor (20%), and norflurazon (41%) compared with the untreated control. However, there were no yield reductions for any of the PRE treatments in 2002. Bentazon + paraquat early postemergence (EPOST) followed by (fb) 2,4-DB POST, bentazon + paraquat EPOST fb clethodim POST, and imazapic EPOST caused ≤5% injury and had no effect on yield in either year.

Smutgrass is an invasive warm-season perennial bunch-type grass native to tropical Asia. The two varieties of smutgrass prevalent in Florida are small smutgrass and giant smutgrass. Laboratory seed germination experiments were conducted on both smutgrass varieties to determine the effect of various environmental factors on germination and emergence. The average germination rate for both varieties was 88% at 30/20 C day/night temperatures. Seed germination for both varieties was greater under simulated temperature flux than at constant temperatures. Seed of both varieties germinated at four simulated Florida temperature fluxes (22/11, 27/15, 33/24, and 29/19 C day/night), although the germination of small smutgrass and giant smutgrass was reduced at 33/24 and 22/11 C, respectively. Germination of small and giant smutgrass under dark conditions was 27 and 53%, respectively. Both smutgrass varieties germinated over a wide range of pH values. Small and giant smutgrass germination was inhibited at water potentials below −0.2 MPa and when small smutgrass seed was placed below the soil surface. Emergence of giant smutgrass seed did not occur below 3 cm. Both smutgrass varieties germinated over a broad range of environmental conditions, indicating their capability of year-round germination; however, germination is only likely to occur under field conditions during the summer growing season when rainfall is prevalent. These results indicate that both species have the ability to germinate over a wide range of environmental conditions but that germination is inhibited by moisture stress and depth of burial. Considering that giant smutgrass prefers higher temperatures than small smutgrass, the advent of rainfall from June through September is conducive for germination. Practices that focus on the germination pattern of smutgrass could lead to better long-term management of smutgrass in Florida.

Hydrilla is one of the most serious aquatic weed problems in the United States, and fluridone is the United States Environment Protection Agency (USEPA)-approved herbicide that provides relatively long-term systemic control. Mature (6-wk-old) and young (freshly planted from 10-cm apical shoot apices) hydrilla were grown in 540 L fiberglass vaults under short- (natural 8 to 10 hr light/14 to 16 hr dark photoperiod) or long- (artificially extended 16 h light/8 h dark photoperiod) day greenhouse conditions. Fluridone treatments of 0, 1, 5, and 10 µg L−1 were applied after 2 wk and maintained within each population and photoperiodic regime throughout the study. Short days promoted subterranean turion formation, but this effect was reduced by long days and 5 and 10 µg L−1 fluridone. Fluridone caused a reduction in chlorophyll and carotenoid levels but the effect on anthocyanin content was variable. Short days caused elevated anthocyanin, and this effect was diminished by fluridone. Fluridone reduced the abscisic acid content of mature apical stems and was higher under short days in younger plants. These studies provide further evidence that fluridone can be used as a fall herbicide application to reduce turion production.

Dodder is a serious parasitic weed in the crops in which it is a problem (particularly citrus). Alternaria destruens is the active ingredient in a registered bioherbicide for control of dodder species. In greenhouse studies, the treatments applied to citrus parasitized with field dodder were a nontreated control; oil at 7.5% v/v in water; ammonium sulfate at 0.125% w/v in water; glyphosate at 0.02 kg ae/L; A. destruens at 1.8 × 1010 spores/L; A. destruens (1.8 × 1010 spores/L) + oil at 7.5% v/v in water; and a mixture of A. destruens (1.8 × 1010 spores/L) + oil at 7.5% v/v in water + glyphosate at 0.02 kg ae/L + ammonium sulfate 0.125% w/v (the mixture treatment). The highest disease or damage severity rating out of all treatments, measured as the area under the disease or damage progress curve (AUDPC), was obtained for the mixture treatment. By 35 d after treatment, all field dodder plants that received the mixture treatment were dead but the host plant, citrus, was not. These results indicate the feasibility of integrating glyphosate, ammonium sulfate, and A. destruens to manage dodder.