Systematically monitoring the baseline sensitivity of troublesome weeds to herbicides is a crucial step in the early detection of their market lifespan. Florpyrauxifen-benzyl is one of the most important herbicides used in rice production throughout the world, and has been used for 5 yr in China. Barnyardgrass is one of the main targeted weed species of florpyrauxifen-benzyl. In total, 114 barnyardgrass populations were collected from rice fields in Jiangsu Province, China, and using whole-plant bioassays they were screened for susceptibility to florpyrauxifen-benzyl. The GR50 values (representing the dose that causes a 50% reduction in fresh weight of aboveground parts) of florpyrauxifen-benzyl for all populations ranged from 1.0 to 34.5 g ai ha−1, with an average of 6.8 g ai ha−1, a baseline sensitivity dose of 3.3 g ai ha−1, and a baseline sensitivity index of 34.5. Twenty-one days after treatment with florpyrauxifen-benzyl at the labeled dose (36 g ai ha−1), 90% of the barnyardgrass populations exhibited >95% reductions in fresh weight of aboveground parts. Compared with the baseline sensitivity dose, 63, 44, and 7 populations had, respectively, no resistance (55%), low resistance (39%), and moderate resistance (6%) to florpyrauxifen-benzyl. Furthermore, the GR50 distribution of barnyardgrass populations did not show a significant correlation with collection location, planting method (direct-seeding or transplanting), or rice species (Oryza sativa L. ssp. indica or ssp. japonica) at any of rice fields where seeds had been collected (P > 0.05). In conclusion, florpyrauxifen-benzyl remains effective for barnyardgrass control in rice fields despite serious resistance challenges.

An advanced deformable Kirkpatrick–Baez (K-B) mirror system was developed, equipped with high-speed piezoelectric actuators, and designed to induce beam decoherence and significantly enhance the quality of X-ray imaging by minimizing undesirable speckles in synchrotron radiation or free-electron laser facilities. Each individual mirror is engineered with 36 independent piezoelectric actuators that operate in a randomized manner, orchestrating the mirror surface to oscillate at a high frequency up to 100 kHz. Through in situ imaging single-slit diffraction measurement, it has been demonstrated that this high-frequency-vibration mirror system is pivotal in disrupting the coherent nature, thereby diminishing speckle formation. The impact of the K-B mirror system is profound, with the capability to reduce the image contrast to as low as 0.04, signifying a substantial reduction in speckle visibility. Moreover, the coherence of the X-ray beam is significantly lowered from an initial value exceeding 80% to 13%.

Natural infection by Trichinella sp. has been reported in humans and more than 150 species of animals, especially carnivorous and omnivorous mammals. Although the presence of Trichinella sp. infection in wild boars (Sus scrofa) has been documented worldwide, limited information is known about Trichinella circulation in farmed wild boars in China. This study intends to investigate the prevalence of Trichinella sp. in farmed wild boars in China. Seven hundred and sixty-one (761) muscle samples from farmed wild boars were collected in Jilin Province of China from 2017 to 2020. The diaphragm muscles were examined by artificial digestion method. The overall prevalence of Trichinella in farmed wild boars was 0.53% [95% confidence interval (CI): 0.51–0.55]. The average parasite loading was 0.076 ± 0.025 larvae per gram (lpg), and the highest burden was 0.21 lpg in a wild boar from Fusong city. Trichinella spiralis was the only species identified by multiplex polymerase chain reaction. The 5S rDNA inter-genic spacer region of Trichinella was amplified and sequenced. The results showed that the obtained sequence (GenBank accession number: OQ725583) shared 100% identity with the T. spiralis HLJ isolate (GenBank accession number: MH289505). Since the consumption of farmed wild boars is expected to increase in the future, these findings highlight the significance of developing exclusive guidelines for the processing of slaughtered farmed wild boar meat in China.

This study aims to evaluate the impact of low-carbohydrate diet, balanced dietary guidance and pharmacotherapy on weight loss among individuals with overweight or obesity over a period of 3 months. The study involves 339 individuals with overweight or obesity and received weight loss treatment at the Department of Clinical Nutrition at the Second Affiliated Hospital of Zhejiang University, School of Medicine, between 1 January 2020 and 31 December 2023. The primary outcome is the percentage weight loss. Among the studied patients, the majority chose low-carbohydrate diet as their primary treatment (168 (49·56 %)), followed by balanced dietary guidance (139 (41·00 %)) and pharmacotherapy (32 (9·44 %)). The total percentage weight loss for patients who were followed up for 1 month, 2 months and 3 months was 4·98 (3·04, 6·29) %, 7·93 (5·42, 7·93) % and 10·71 (7·74, 13·83) %, respectively. Multivariable logistic regression analysis identified low-carbohydrate diet as an independent factor associated with percentage weight loss of ≥ 3 % and ≥ 5 % at 1 month (OR = 0·461, P < 0·05; OR = 0·349, P < 0·001). The results showed that a low-carbohydrate diet was an effective weight loss strategy in the short term. However, its long-term effects were comparable to those observed with balanced dietary guidance and pharmacotherapy.

As an important component of prehistoric subsistence, an understanding of bone-working is essential for interpreting the evolution of early complex societies, yet worked bones are rarely systematically collected in China. Here, the authors apply multiple analytical methods to worked bones from the Longshan site of Pingliangtai, in central China, showing that Neolithic bone-working in this area, with cervid as the main raw material, was mature but localised, household-based and self-sufficient. The introduction of cattle in the Late Neolithic precipitated a shift in bone-working traditions but it was only later, in the Bronze Age, that cattle bones were utilised in a specialised fashion and dedicated bone-working industries emerged in urban centres.

In the absence of the necessary valley topography, karst depressions are sometimes used to construct conventional impoundments in order to contain tailings. Leakage is a primary concern for such impoundments. The purpose of the current study was to determine the characteristics and barrier performance of laterite mantling karst depressions, using, as an example, the Wujiwatang (WJWT) tailings impoundment, located in the Gejiu mining area, southwestern China. The geotechnical-hydrogeological properties, geochemistry, mineral compositions, and particle shapes of the laterite were investigated by geotechnical techniques, chemical analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that the laterite contained poorly sorted particles that covered a wide spectrum of grain sizes (<5 mm to <50 nm), and was unexpectedly categorized as silty clay or silt with a high liquid limit. The continuous gradation and small D90 value helped the laterite achieve saturated hydraulic conductivities in the range of <10–6 cm/s required for impoundment liners. The laterite beneath the tailings impoundment was finer-grained and had a lower permeability than that of the laterite on the depression walls within the same depression. Geochemically and mineralogically, the laterite was classified as true laterite and its major mineralogical constituents were gibbsite and goethite with chlorite occurring in trace amounts. The laterite was dominated by subspherolitic–spherolitic cohesionless grains (concretions) made up of Al, Fe, Ti, and Mn oxides and hydroxides. The laterite did not have plasticity indices in the clay range. Fortunately, slopewash prior to tailings containment selectively transported the finer oxide concretions to the depression floor, creating a natural low-permeability barrier for the WJWT tailings impoundment. This is undoubtedly important for the planning and design of future karst depression-type tailings impoundments around the world.

In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

Hypertension represents one of the most common pre-existing conditions and comorbidities in Coronavirus disease 2019 (COVID-19) patients. To explore whether hypertension serves as a risk factor for disease severity, a multi-centre, retrospective study was conducted in COVID-19 patients. A total of 498 consecutively hospitalised patients with lab-confirmed COVID-19 in China were enrolled in this cohort. Using logistic regression, we assessed the association between hypertension and the likelihood of severe illness with adjustment for confounders. We observed that more than 16% of the enrolled patients exhibited pre-existing hypertension on admission. More severe COVID-19 cases occurred in individuals with hypertension than those without hypertension (21% vs. 10%, P = 0.007). Hypertension associated with the increased risk of severe illness, which was not modified by other demographic factors, such as age, sex, hospital geological location and blood pressure levels on admission. More attention and treatment should be offered to patients with underlying hypertension, who usually are older, have more comorbidities and more susceptible to cardiac complications.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

Isolated gametes can be used to investigate fertilization mechanisms, and probe distant hybridization between different species. Pollen grains of wheat and Setaria viridis are tricellular, containing sperm cells at anthesis. Sperm from these plants were isolated by breaking open pollen grains in a osmotic solution. Wheat ovules were digested in an enzyme solution for 20 min, and then transferred to an isolation solution without enzymes to separate egg cells from ovules. The fusion of wheat egg cells with wheat and S. viridis sperm was conducted using an electro-fusion apparatus. Under suitable osmotic pressure (10% mannitol), calcium concentration of 0.001% (CaCl2·2H2O), and a 30–35 V alternating electric field for 15 s, egg cells and sperm adhered to each other and became arranged in a line. Electroporation of the plasma membrane of egg cells and sperm using a 300–500 V direct-current electric field (45 µs amplitude pulse) caused them to fuse.

Seed reserves play vital roles in seed germination and seedling growth and their variation may be related to various environment factors, plant traits and phylogenetic history. Here, the evolutionary correlation associated with seed mass and altitude and carbon (C), nitrogen (N) and phosphorus (P) allocation of seeds among 253 alpine herbaceous plants was tested. In this study, phylogeny had strong limitations on nutrient allocation of seeds across species, and species from younger phylogenetic groups tended to have higher N and P contents, which might be considered as the evolutionary selection of seed plants. Higher seed N and P content would help seedlings to gain more survival chance and stronger competitive capacity, and their progeny would be more likely to be preserved. When phylogeny was considered, altitude only had a significant positive effect on P content, but the negative effects on seed mass were all expressed. The independent effects of altitude and seed mass suggest that the nutrient allocation of seeds might be affected by both environment and plant traits. In addition, altitude and seed mass displayed partial overlapping effects on nutrient allocation of seeds. The negative effects of seed mass were affected slightly by altitude, whereas altitude only had a significant positive effect on P content when seed mass was controlled. Above all, seed P content showed obvious and general correlations with seed mass, altitude and age of clade, which indicated that higher seed P content might be an adaptive selection of species associated with growth and survival of progeny.