This study explores an interesting fluid–structure interaction scenario: the flow past a flexible filament fixed at two ends. The dynamic performance of the filament under various inclination angles ($\theta$) was numerically investigated using the immersed boundary method. The motion of the filament in the $\theta$–$Lr$ space was categorised into three flapping modes and two stationary modes, where $Lr$ is the ratio of filament length to the distance between its two ends. The flow fields for each mode and their transitions were introduced. A more in-depth analysis was carried out for flapping at a large angle (FLA mode), which is widely present in the $\theta$–$Lr$ space. The maximum width $W$ of the time-averaged shape of the filament has been shown to strongly correlate with the flapping frequency. After non-dimensionalising based on $W$, the flapping frequency shows little variation across different $Lr$ and $\theta$. Moreover, two types of lift variation process were also identified. Finally, the total lift, drag and lift-to-drag ratio of the system were studied. Short filaments, such as those with $Lr\leqslant 1.5$, were shown to significantly increase lift and the lift-to-drag ratio over a wide range of $\theta$ compared with a rigid plate. Flow field analysis concluded that the increases in pressure difference on both sides of the filament, along with the upper part of the flexible filament having a normal direction closer to the $y$ direction, were the primary reasons for the increase in lift and lift-to-drag ratio. This study can provide some guidance for the potential applications of flexible structures.

Aphis gossypii Glover (Hemiptera: Aphididae) is a significant pest of Capsicum annuum (Solanales: Solanaceae) and exhibits intraspecific differentiation within populations. To investigate the adaptability of Hap3 and Hap17 A. gossypii to various C. annuum varieties, including ‘Lvzhou101’ (LZ), ‘Lashen’ (LA), ‘Saierweilvtianjiao’ (SE), ‘Haimaihongri’ (HM), ‘Chaotianjiao’ (CT), and ‘Luosijiangjun’ (LS), we employed life tables to analyse growth and population parameters post-feeding and conducted petri dish host choice experiments to assess the host plant preference of A. gossypii. Survival rates of A. gossypii varied significantly across C. annuum varieties. Notably, Hap3 and Hap17 thrived on ‘LZ’ but failed to establish populations on ‘LA’. The net reproductive rate (R0), average generation time (T), and intrinsic rate of increase (rm) differed markedly between Hap3 and Hap17 across C. annuum varieties. Feeding on ‘LZ’ resulted in a significantly higher R0 value (26.49) for Hap3 relative to other varieties. The T (7.60 days) and rm (0.27) values for Hap3 on ‘SE’ were superior to those observed on other C. annuum varieties. These findings indicate that ‘SE’ is the optimal host for Hap3 growth, while ‘LZ’ best supports Hap17. Both haplotypes exhibited the lowest adaptability to ‘LA’. Therefore, the utilisation capacity of A. gossypii populations on C. annuum demonstrates differentiation, and the resistance levels among C. annuum varieties to A. gossypii vary. This differentiation can inform targeted management strategies for aphid infestations on pepper crops.

Broadband frequency-tripling pulses with high energy are attractive for scientific research, such as inertial confinement fusion, but are difficult to scale up. Third-harmonic generation via nonlinear frequency conversion, however, remains a trade-off between bandwidth and conversion efficiency. Based on gradient deuterium deuterated potassium dihydrogen phosphate (KDxH2-xPO4, DKDP) crystal, here we report the generation of frequency-tripling pulses by rapid adiabatic passage with a low-coherence laser driver facility. The efficiency dependence on the phase-matching angle in a Type-II configuration is studied. We attained an output at 352 nm with a bandwidth of 4.4 THz and an efficiency of 36%. These results, to the best of our knowledge, represent the first experimental demonstration of gradient deuterium DKDP crystal in obtaining frequency-tripling pulses. Our research paves a new way for developing high-efficiency, large-bandwidth frequency-tripling technology.

Time-domain characterization of ultrashort pulses is essential for studying interactions between light and matter. Here, we propose and demonstrate an all-optical pulse sampling technique based on reflected four-wave mixing with perturbation on a solid surface. In this method, a weak perturbation pulse perturbs the four-wave mixing signal generated by a strong fundamental pulse. The modulation signal of the four-wave mixing, which is detected in the reflection geometry to ensure a perfect phase-matching condition, directly reflects the temporal profile of the perturbation pulse. We successfully characterized multi-cycle and few-cycle pulses using this method. The reliability of our approach was verified by comparing it to the widely employed frequency-resolved optical gating method. This technique provides a simple and robust method for characterizing ultrashort laser pulses.

An ultrasonic phased array system is introduced to study the three-dimensional (3-D) movement of a single bubble in a GaInSn alloy under a transverse magnetic field (MF), which is verified by bubble experiments in water. The 3-D motion trajectories of individual bubbles in the GaInSn are obtained under a horizontal MF. As the MF becomes stronger, the bubble successively oscillates in random directions (R mode), a direction perpendicular to the MF (V mode), a direction parallel to the MF (P mode) and finally it rises straight (S mode). The significant anisotropy of the oscillation directions at a moderate MF intensity may be due to the anisotropy of the vortex structure around the bubble. Furthermore, the oscillation amplitude gradually declines with increasing MF intensity until the bubble trajectory finally becomes a straight line. Our measurements allow us to specify the characteristic regions for the observed bubble modes in the $N-Eo-Re$ parameter space (N is the magnetic interaction parameter, Eo is the Eötvös number and Re is the Reynolds number). In addition, more detailed characteristics of bubble terminal velocity are revealed, showing that the bubble velocities are closely related to the motion modes. The increase in bubble velocity at a moderate MF intensity is caused by the weakening oscillation. At a high strength, the MF monotonically suppresses the rise velocity of the bubble with a fixed scaling law.

As an important component of prehistoric subsistence, an understanding of bone-working is essential for interpreting the evolution of early complex societies, yet worked bones are rarely systematically collected in China. Here, the authors apply multiple analytical methods to worked bones from the Longshan site of Pingliangtai, in central China, showing that Neolithic bone-working in this area, with cervid as the main raw material, was mature but localised, household-based and self-sufficient. The introduction of cattle in the Late Neolithic precipitated a shift in bone-working traditions but it was only later, in the Bronze Age, that cattle bones were utilised in a specialised fashion and dedicated bone-working industries emerged in urban centres.

Differences in the properties of clay minerals cause formation damage under the condition of thermal production in heavy-oil reservoirs; asphaltenes adsorbed on clay minerals exacerbate the formation damage. The purpose of the present study was to reveal the variation in clay minerals and the adsorption behavior of asphaltenes on clay mineral surfaces under thermal recovery conditions. Volume changes and transformations of typical clay minerals were studied under various conditions (80 and 180°C, pH 9 and 11, aqueous and oven-dry conditions). On this basis, the adsorption behavior and mechanism of asphaltenes on the surfaces of clay minerals in various simulated conditions were investigated. The adsorption mechanism was revealed using kinetics and isothermal adsorption models. The results showed that the volume of montmorillonite expanded by up to 159.13% after water–rock interaction at 180°C with pH 11; meanwhile, the conversion rates of kaolinite and illite to montmorillonite were 6.6 and 7.8%, respectively. The water–rock interaction intensified the volume changes and transformations of clay minerals under thermal conditions. The amounts of asphaltene adsorbed on clay minerals at 180°C were greater than those at 80°C. The adsorption process of asphaltenes was inhibited under aqueous conditions. The abilities of the constituent minerals to bind asphaltenes was in order: montmorillonite > chlorite > kaolinite > illite > quartz sand. The adsorption process of asphaltenes yielded high coefficients of regression with both the Freundlich and Langmuir models under oven-dry (>0.99) and aqueous (>0.98) conditions. At 180°C under aqueous conditions, the water film significantly inhibited the adsorption of asphaltene on the clay minerals. The adsorption process of asphaltenes, therefore, could be regarded as the adsorption occurring at lower concentrations under oven-dry conditions.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

The production and industrial use of asbestos cement and other asbestos-containing materials have been restricted in most countries because of the potential detrimental effects on human health and the environment. Chrysotile is the most common form of asbestos and investigations into how to recycle this serpentine phyllosilicate mineral have attracted extensive attention. Chrysotile asbestos tailings can be transformed thermally, at high temperature, by in situ carbothermal reduction (CR). The CR method aims to maximize use of the chrysotile available and uses high temperatures and carbon to change the mineral form and structure of the chrysotile asbestos tailings. When chrysotile asbestos is employed as the raw material and coke (carbon) powder is used as the reducing agent for CR transformation, stable, high-temperature composites consisting of forsterite, stishovite, and silicon carbide are formed. Forsterite (Mg2SiO4) was the most abundant crystalline phase formed in samples heat treated below 1500ºC. At 1600ºC, forsterite was exhausted through decomposition and β-SiC formed by reduction of stishovite. A larger proportion of β-SiC was generated as the carbon content was increased. This research revealed that both temperature and carbon addition play key roles in the transformation of chrysotile asbestos tailings.

This article focuses on the luggage trolley transportation problem, an essential part of robotic autonomous luggage trolley collection. To efficiently address the nonholonomic constraints derived from the formation of two collaborative robots and a queue of luggage trolleys, we propose a comprehensive framework consisting of a global planning method and a real-time divide-and-conquer control strategy. The popular Hybrid A* algorithm generates a feasible path as the global planner. A model predictive controller is designed to track this path stably and in real time. To maintain the formation so that the whole queue of robots and luggage trolleys does not split, a safety filter that consists of a discrete-time control Lyapunov function and a decentralized control barrier function is implemented in the transportation process. Finally, we conduct real-world experiments to verify the effectiveness of the proposed method on three representative paths, and the results show that our approach can achieve robust performance. The demonstration video can be found at https://www.youtube.com/watch?v=iPiT8BfLIpU.

The discharged capillary plasma channel has been extensively studied as a high-gradient particle acceleration and transmission medium. A novel measurement method of plasma channel density profiles has been employed, where the role of plasma channels guiding the advantages of lasers has shown strong appeal. Here, we have studied the high-order transverse plasma density profile distribution using a channel-guided laser, and made detailed measurements of its evolution under various parameters. The paraxial wave equation in a plasma channel with high-order density profile components is analyzed, and the approximate propagation process based on the Gaussian profile laser is obtained on this basis, which agrees well with the simulation under phase conditions. In the experiments, by measuring the integrated transverse laser intensities at the outlet of the channels, the radial quartic density profiles of the plasma channels have been obtained. By precisely synchronizing the detection laser pulses and the plasma channels at various moments, the reconstructed density profile shows an evolution from the radial quartic profile to the quasi-parabolic profile, and the high-order component is indicated as an exponential decline tendency over time. Factors affecting the evolution rate were investigated by varying the incentive source and capillary parameters. It can be found that the discharge voltages and currents are positive factors quickening the evolution, while the electron-ion heating, capillary radii and pressures are negative ones. One plausible explanation is that quartic profile contributions may be linked to plasma heating. This work helps one to understand the mechanisms of the formation, the evolutions of the guiding channel electron-density profiles and their dependences on the external controllable parameters. It provides support and reflection for physical research on discharged capillary plasma and optimizing plasma channels in various applications.

Relativistic few-cycle mid-infrared (mid-IR) pulses are unique tools for strong-field physics and ultrafast science, but are difficult to generate with traditional nonlinear optical methods. Here, we propose a scheme to generate such pulses with high efficiency via plasma-based frequency modulation with a negatively chirped laser pulse (NCLP). The NCLP is rapidly compressed longitudinally due to dispersion and plasma etching, and its central frequency is downshifted via photon deceleration due to the enhanced laser intensity and plasma density modulations. Simulation results show that few-cycle mid-IR pulses with the maximum center wavelength of $7.9\;\unicode{x3bc} \mathrm{m}$ and pulse intensity of ${a}_{\mathrm{MIR}}=2.9$ can be generated under a proper chirp parameter. Further, the maximum energy conversion efficiency can approach 5.0%. Such a relativistic mid-IR source is promising for a wide range of applications.

Breast cancer is a high-risk disease with a high mortality rate among women. Chemotherapy plays an important role in the treatment of breast cancer. However, chemotherapy eventually results in tumours that are resistant to drugs. In recent years, many studies have revealed that the activation of Wnt/β-catenin signalling is crucial for the emergence and growth of breast tumours as well as the development of drug resistance. Additionally, drugs that target this pathway can reverse drug resistance in breast cancer therapy. Traditional Chinese medicine has the properties of multi-target and tenderness. Therefore, integrating traditional Chinese medicine and modern medicine into chemotherapy provides a new strategy for reversing the drug resistance of breast tumours. This paper mainly reviews the possible mechanism of Wnt/β-catenin in promoting the process of breast tumour drug resistance, and the progress of alkaloids extracted from traditional Chinese medicine in the targeting of this pathway in order to reverse the drug resistance of breast cancer.

In the Yili terrane at Awulale mountain, most shoshonitic lavas are related to post-collision extension and were extruded during the Late Carboniferous to Early Permian (310–280 Ma). Herein, we evaluate a small-volume occurrence of shoshonitic magmas in the southern Yili terrane formed c. 346 Ma ago. The high MgO (Mg#) and positive Hf isotope values of the shoshonitic magmas indicate the input of juvenile mantle-derived material. Still, their high Ba–Sr signatures were likely inherited from the partial melting of previously metasomatized lithospheric mantle. We argue the shoshonitic magmatic activity recorded a syn-subduction extensional history in the Yili terrane. This interpretation is consistent with the magmatic records from Early Carboniferous A-type granite and magnesian andesite found in the Zhaosu–Adentao–Dahalajunshan area of the southern Yili terrane. Combined with the geological development in this area, we propose that the emergence of the shoshonitic rocks records either the retreat of the trench or the rollback of the Junggar oceanic slab that occurred at or before the 346.1 ± 3.1 Ma age of the rocks.

The purpose of this study was to analyse the clinical characteristics of patients with severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) PCR re-positivity after recovering from coronavirus disease 2019 (COVID-19). Patients (n = 1391) from Guangzhou, China, who had recovered from COVID-19 were recruited between 7 September 2021 and 11 March 2022. Data on epidemiology, symptoms, laboratory test results and treatment were analysed. In this study, 42.7% of recovered patients had re-positive result. Most re-positive patients were asymptomatic, did not have severe comorbidities, and were not contagious. The re-positivity rate was 39%, 46%, 11% and 25% in patients who had received inactivated, mRNA, adenovirus vector and recombinant subunit vaccines, respectively. Seven independent risk factors for testing re-positive were identified, and a predictive model was constructed using these variables. The predictors of re-positivity were COVID-19 vaccination status, previous SARs-CoV-12 infection prior to the most recent episode, renal function, SARS-CoV-2 IgG and IgM antibody levels and white blood cell count. The predictive model could benefit the control of the spread of COVID-19.

This paper develops the estimation method of mean and covariance functions of functional data with additional covariate information. With the strength of both local linear smoothing modeling and general weighing scheme, we are able to explicitly characterize the mean and covariance functions with incorporating covariate for irregularly spaced and sparsely observed longitudinal data, as typically encountered in engineering technology or biomedical studies, as well as for functional data which are densely measured. Theoretically, we establish the uniform convergence rates of the estimators in the general weighing scheme. Monte Carlo simulation is conducted to investigate the finite-sample performance of the proposed approach. Two applications including the children growth data and white matter tract dataset obtained from Alzheimer's Disease Neuroimaging Initiative study are also provided.

To verify whether a graph is suitable for describing driver behaviour performance under the effects of navigation information, this study applies two types of prompt messages: simple and detailed. The simple messages contain only direction instructions, while the detailed messages contain distance, direction, road and lane instructions. A driving simulation experiment was designed to collect the empirical data. Two vehicle operating indicators (velocity and lateral offset), and two driver manoeuvre indicators (accelerator power and steering wheel angle) were selected, and T-test was used to compare the differences of behavioural performance. Driving behaviour graphs were constructed for the two message conditions; their characteristics and similarities were further analysed. Finally, the results of T-test of behavioural performance and similarity results of the driving behaviour graphs were compared. Results indicated that the two different types of prompt messages were associated with significant differences in driving behaviours, which implies that it is feasible to describe the characteristics of driving behaviours guided by navigation information using such graphs. This study provides a new method for systematically exploring the mechanisms affecting drivers’ response to navigation information, and presents a new perspective for the optimisation of navigation information.