Accurate characterization of high-power laser parameters, especially the near-field and far-field distributions, is crucial for inertial confinement fusion experiments. In this paper, we propose a method for computationally reconstructing the complex amplitude of high-power laser beams using modified coherent modulation imaging. This method has the advantage of being able to simultaneously calculate both the near-field (intensity and wavefront/phase) and far-field (focal-spot) distributions using the reconstructed complex amplitude. More importantly, the focal-spot distributions at different focal planes can also be calculated. To verify the feasibility, the complex amplitude optical field of the high-power pulsed laser was measured after static aberrations calibration. Experimental results also indicate that the near-field wavefront resolution of this method is higher than that of the Hartmann measurement. In addition, the far-field focal spot exhibits a higher dynamic range (176 dB) than that of traditional direct imaging (62 dB).

Based on a contingent valuation method survey on air quality improvement in northern China, we construct several subjective perception determinants of respondents' valuation uncertainty from both the demand and perceived supply sides. Using the individual-level uncertainty measurements initially proposed by Wang and He (2011) and their alternative transformations, we analyze how these factors of demand and perceived supply sides affect people's valuation uncertainty. Our results demonstrate the significant contribution of these determinants in explaining respondents' uncertainty. On the demand side, people who ‘don't know much’ about benefits-related factors have the highest level of uncertainty, and those claiming to ‘know nothing’ most often report the lowest level of uncertainty. On the supply side, people who either do not trust or are not satisfied with the control policies tend to be more certain of their valuation. The subsequent analyses also suggest that these results be interpreted as negative certainty, which is attributed to a lack of interest.

OBJECTIVES/GOALS: High serum copper (Cu) levels have previously been described in bariatric patients. The kidneys are a target organ for Cu toxic insult but the role of Cu on kidney function (eGFR) is uncertain. This study examines the association between Cu and eGFR in a bariatric population in Southeast Louisiana. METHODS/STUDY POPULATION: Seven hundred fifty patients will be recruited from the Bariatric Center of the University Medical Center in New Orleans. Inclusion criteria include: age ≥ 18 years, clinic visit between June 1, 2018 – May 31st 2024, and having a serum Cu test result. Covariables such as inflammatory markers and hormonal contraception use will be assessed as potential confounders. Blood pressure will be assessed as a potential effect modifier. Data will be obtained from electronic medical records. Two cohorts will be assembled, a pre-surgery cross-sectional cohort and another followed post-surgery. Separate models will be developed stratified by race-ethnicity. RESULTS/ANTICIPATED RESULTS: In a pilot study of bariatric patients 26% had elevated (>155 mcg/dl) serum Cu and pronounced racial differences were noted. Characteristics consisted of a mean BMI of approximately 50 kg/m2; 91% were female and 69% were Black. Black patients had approximately double the prevalence (OR 1.98; 95% CI: 1.15, 3.4) compared to white patients. Due to the dual nature of the kidneys’ involvement in metabolism via excretion and being the target organ for toxic insult, racial differences in exposure, coupled with the disproportionate rates of chronic kidney disease in Black adults, may be an explanation for the association between elevated Cu levels and eGFR in Black adults in this study. DISCUSSION/SIGNIFICANCE: Results from this study will provide insight into the prevalence of Cu and its association with kidney function in a bariatric population. Chronic kidney disease or other forms of renal impairment may result in the need for more conservative guidelines for dietary copper in bariatric medicine.

Microplastics (MPs) are carbon-rich polymers that are ubiquitous in the environment. With the increase of plastic production, microplastic pollution may be exacerbated and result in significant changes in microbial communities and biogeochemical processes such as carbon cycling, eventually impacting greenhouse gas emission and carbon storage in terrestrial ecosystems. However, current research on the effect of MPs on soil carbon cycling is still limited, and there is a lack of systematic review of the scattered information obtained from previous studies. Accordingly, this review provides a systematic overview of the current knowledge on the effects of MPs on soil carbon cycling and gives future research suggestions. Emerging evidence indicates that MPs could affect soil carbon stability and CO2 and CH4 emission by modifying soil physicochemical and microbiological properties; though biodegradable MPs often exhibit a greater effect than nonbiodegradable ones, the specific effects are highly dependent on plastic type, size and concentration. The specific mechanisms of MPs’ impact on soil carbon cycles remain elusive, which are discussed mainly from the perspective of microbial changes, including microbial biomass, microbial community composition, and key enzymes and functional genes associated with carbon metabolism. Further research is needed to elucidate whether MPs have a positive priming effect on soil carbon decomposition and the biotic and abiotic mechanisms involved. This review paper helps researchers gain a clearer picture of how and through which way MPs impact carbon cycling in soil ecosystems.

The Wood Snipe Gallinago nemoricola is one of the least known shorebird species, and its habitat associations are very poorly understood. Here we provide the first assessment of the habitat use of the Wood Snipe during the breeding season. Between May and July 2021 at a 4-km2 alpine meadow in Sichuan province, China, we conducted population surveys and behavioural observations to identify sites where breeding Wood Snipe occurred and foraged. We quantified the habitat characteristics and food resource availability of these sites and compared them with randomly selected “background” sites. Comparison between 34 occurrence sites and 25 background sites indicated that during the breeding season, Wood Snipes are not distributed evenly across alpine meadow habitats, but preferred habitats in the lower part (3,378–3,624 m) of the alpine meadow with intermediate levels of soil moisture. In addition, comparison between 17 foraging sites and 24 background sites showed that the Wood Snipe tended to forage at sites with higher soil fauna abundance. We found weak evidence for denser vegetation cover at its height and no evidence for other biotic habitat variables such as vegetation composition or other abiotic habitat variables such as slope, soil penetrability, or disturbance level to influence Wood Snipe habitat associations. Our results suggest that the actual distribution range of the Wood Snipe during the breeding season may be smaller than expected from the extent of apparently suitable habitat. We advise caution in evaluating the potential habitat availability and distribution of the Wood Snipe, and call for further research to better understand the ecology of this rare species to inform its conservation.

High-molecular-weight glutenin subunits (HMW-GS) contribute to dough elasticity and bread baking quality in wheat. In this study, wheat varieties were classified based on their HMW-GS composition into three groups: 1Dx5 (5 + 10, Gaoyou 8901, Xinmai 28, Xinmai 19, Xinmai 26 and Jinbaoyin), 1Dx2 (2 + 12, Zhoumai 24, Xinmai 9 and Yumai) and 1Dx4 (4 + 12, Aikang 58). Sequence analysis showed that 1Dx-GY8901, 1Dx-XM28, 1Dx-XM19 and 1Dx-XM26 were similar to the 1Dx5 gene and clustered on the same branch, while 1Dx-AK58, 1Dx-ZM24, 1Dx-JBY, 1Dx-YM, 1Dx-XM9 and 1Dx-JBY were more similar to the 1Dx2 gene and clustered on the same branch with 1Dx.2.2. There was a mutation of Ser to Cys at position S2, for an extra Cys in the repeat regions of 1Dx-XM19, 1Dx-XM26, 1Dx-XM28 and 1Dx-GY8901. The wheat HMW-GS genes exhibited similar percentages of α-helix, extended strand, β-turn and random coil structure, with ranges of 13.33–13.59, 4.77–5.78, 7.08–9.18 and 72.3–73.94%, respectively. Sequence conservation and the composition of HMW-GS subunits were also analysed for a series of strong gluten wheat varieties, Xinmai 9 (1, 7 + 8, 2 + 12), Xinmai 19 (1, 7 + 9, 5 + 10), Xinmai 26 (1, 7 + 8, 5 + 10) and Xinmai 28 (1, 7 + 9, 5 + 10). The results of this work should facilitate future breeding efforts and provide the theoretical basis for wheat quality improvement.

The orogenic process and crustal growth of the Changning–Menglian Palaeo-Tethys orogenic belt in the southeastern Tibetan Plateau is not fully understood. Triassic Caojian rhyolites and granites occur extensively in this orogenic belt and represent important constraints for this issue. This study aims to examine the relationships between the Triassic Caojian rhyolites and granites and to gain a better understanding of their possible petrogenesis. The study used zircon U–Pb geochronology, trace element analyses and Sr–Nd–Hf isotope data to better understand the relationships and possible origin of the rhyolites and granites. Recent zircon U–Pb ages indicated that the Caojian rhyolites were emplaced at 227.2 Ma, whereas age estimates for Caojian granites were slightly older (233.4–236.9 Ma). The Caojian rhyolites are enriched in large-ion lithophile elements and high-field-strength elements, with elevated FeOtot/MgO and Ga/Al ratios. However, they are significantly depleted in Ba, Sr, Eu, P and Ti. These geochemical characteristics indicate that they have an A-type affinity. Furthermore, the Caojian granites comprise biotite monzogranites and granodiorites and show unfractionated composition. Mineralogically, the Caojian granites were found to contain diagnostic I-type minerals such as hornblende. Geochemical data suggest that the petrogenesis of the Triassic Caojian rhyolites is characterized by rejuvenation of crystal mush represented by the Triassic Caojian granites. The necessary thermal input was supplied by mafic magma. This magmatic evolution was likely related to lithospheric delamination and upwelling of the asthenosphere during the Mid- to Late Triassic, forming post-collisional I-type granites and A-type volcanics in the Changning–Menglian Palaeo-Tethys orogenic belt.

Chronic inflammation exerts pleiotropic effects in the aetiology and progression of chronic obstructive pulmonary disease (COPD). Glucosamine is widely used in many countries and may have anti-inflammatory properties. We aimed to prospectively evaluate the association of regular glucosamine use with incident COPD risk and explore whether such association could be modified by smoking in the UK Biobank cohort, which recruited more than half a million participants aged 40–69 years from across the UK between 2006 and 2010. Cox proportional hazards models with adjustment for potential confounding factors were used to calculate hazard ratios (HR) as well as 95 % CI for the risk of incident COPD. During a median follow-up of 8·96 years (interquartile range 8·29–9·53 years), 9016 new-onset events of COPD were documented. We found that the regular use of glucosamine was associated with a significantly lower risk of incident COPD with multivariable adjusted HR of 0·80 (95 % CI, 0·75, 0·85; P < 0·001). When subgroup analyses were performed by smoking status, the adjusted HR for the association of regular glucosamine use with incident COPD were 0·84 (0·73, 0·96), 0·84 (0·77, 0·92) and 0·71 (0·62, 0·80) among never smokers, former smokers and current smokers, respectively. No significant interaction was observed between glucosamine use and smoking status (P for interaction = 0·078). Incident COPD could be reduced by 14 % to 84 % through a combination of regular glucosamine use and smoking cessation.

Nicotine 3,5-dihydroxybenzoate dihydrate is a nicotine salt and can be used as compositions in tobacco products. X-ray powder diffraction data, unit-cell parameters, and space group for nicotine 3,5-dihydroxybenzoate, C10H15N2⋅C7H5O4⋅2H2O, are reported [a = 8.424(1) Å, b = 13.179(8) Å, c = 8.591(1) Å, α = 90°, β = 102.073(8)°, γ = 90°, unit-cell volume V = 932.765(3) Å3, Z = 2, ρcal = 1.256 g⋅cm−3, and space group P21] at room temperature. All measured lines were indexed and are consistent with the P21 space group.

A recently developed pneumonia caused by SARS-CoV-2 has quickly spread across the world. Unfortunately, a simplified risk score that could easily be used in primary care or general practice settings has not been developed. The objective of this study is to identify a simplified risk score that could easily be used to quickly triage severe COVID-19 patients. All severe and critical adult patients with laboratory-confirmed COVID-19 on the West campus of Union Hospital, Wuhan, China, from 28 January 2020 to 29 February 2020 were included in this study. Clinical data and laboratory results were obtained. CURB-65 pneumonia score was calculated. Univariate logistic regressions were applied to explore risk factors associated with in-hospital death. We used the receiver operating characteristic curve and multivariate COX-PH model to analyse risk factors for in-hospital death. A total of 74 patients (31 died, 43 survived) were finally included in the study. We observed that compared with survivors, non-survivors were older and illustrated higher respiratory rate, neutrophil-to-lymphocyte ratio, D-dimer and lactate dehydrogenase (LDH), but lower SpO2 as well as impaired liver function, especially synthesis function. CURB-65 showed good performance for predicting in-hospital death (area under curve 0.81, 95% confidence interval (CI) 0.71–0.91). CURB-65 ⩾ 2 may serve as a cut-off value for prediction of in-hospital death in severe patients with COVID-19 (sensitivity 68%, specificity 81%, F1 score 0.7). CURB-65 (hazard ratio (HR) 1.61; 95% CI 1.05–2.46), LDH (HR 1.003; 95% CI 1.001–1.004) and albumin (HR 0.9; 95% CI 0.81–1) were risk factors for in-hospital death in severe patients with COVID-19. Our study indicates CURB-65 may serve as a useful prognostic marker in COVID-19 patients, which could be used to quickly triage severe patients in primary care or general practice settings.

The effect of holly polyphenols (HP) on intestinal inflammation and microbiota composition was evaluated in a piglet model of lipopolysaccharide (LPS)-induced intestinal injury. A total of twenty-four piglets were used in a 2 × 2 factorial design including diet type and LPS challenge. After 16 d of feeding with a basal diet supplemented with or without 250 mg/kg HP, pigs were challenged with LPS (100 μg/kg body weight) or an equal volume of saline for 4 h, followed by analysis of disaccharidase activities, gene expression levels of several representative tight junction proteins and inflammatory mediators, the SCFA concentrations and microbiota composition in intestinal contents as well as proinflammatory cytokine levels in plasma. Our results indicated that HP enhanced intestinal disaccharidase activities and reduced plasma proinflammatory cytokines including TNF-α and IL-6 in LPS-challenged piglets. Moreover, HP up-regulated mRNA expression of intestinal tight junction proteins such as claudin-1 and occludin. In addition, bacterial 16S rRNA gene sequencing showed that HP altered hindgut microbiota composition by enriching Prevotella and enhancing SCFA production following LPS challenge. These results collectively suggest that HP is capable of alleviating LPS-triggered intestinal injury by improving intestinal disaccharidase activities, barrier function and SCFA production, while reducing intestinal inflammation.

Although the streaked optical pyrometer (SOP) system has been widely adopted in shock temperature measurements, its reliability has always been of concern. Here, two calibrated Planckian radiators with different color temperatures were used to calibrate and verify the SOP system by comparing the two calibration standards using both multi-channel and single-channel methods. A high-color-temperature standard lamp and a multi-channel filter were specifically designed for the measurement system. To verify the reliability of the SOP system, the relative deviation between the measured data and the standard value of less than 5% was calibrated out, which demonstrates the reliability of the SOP system. Furthermore, a method to analyze the uncertainty and sensitivity of the SOP system is proposed. A series of laser-induced shock experiments were conducted at the ‘Shenguang-II’ laser facility to verify the reliability of the SOP system for temperature measurements at tens of thousands of kelvin. The measured temperature of the quartz in our experiments agreed fairly well with previous works, which serves as evidence for the reliability of the SOP system.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

Conventional pNIPAAm microgel synthesis utilizes surfactants to suspend pre-gel droplets in the immiscible continuous phase due to the slow polymerization required for synthesizing pNIPAAm in aqueous solvent. To improve the fabrication process and to eliminate the effects of surfactant on microgel quality, a surfactant-free and water-free method was developed. Rapid polymerization of high-quality microgels was achieved in a single-channel microfluidic device to help maintain the integrity of gel particles without the addition of surfactants. The droplet generation mechanism and the effect of flow rate of the two in-going immiscible fluid on the geometry of the produced microgels were studied. The produced microgels have low polydispersity with a dispersity index of 6.4%. The pNIPAAm hydrogels fabricated in the DMSO solvent has smaller pore size and more uniform microstructure compared to that synthesized in water. The fabricated pNIPAAm microgels show a sharp volume phase transition at ∼32 °C and high deswelling/swelling rate.

The evolution of fatigue performance and surface mechanical properties of AISI 304 stainless steel induced by the electropulsing-assisted ultrasonic surface rolling process (EP-USRP) was systematically investigated by integrating instrumented indentation, scanning electron microscopy with electron backscatter diffraction, and transmission electron microscopy. The results indicate that higher hardness, greater strength, finer ultra-refined grains, and higher residual compressive stress are formed within the strengthened layer compared with the original ultrasonic surface rolling process (USRP). EP-USRP with the optimized experimental parameters can produce a higher average rotating bending fatigue strength for AISI 304 stainless steel than USRP. Anomalously and noteworthily, all fatigue specimens treated by EP-USRP showed an incomplete fracture, revealing a higher reservation of safety in practical engineering applications. The further modified structure strengthening and stress strengthening induced by EP-USRP are likely the primary intrinsic reasons for the observed phenomena. Furthermore, the influence mechanism of EP-USRP was discussed scrupulously.