One is not often called upon to review for a law journal a book which is not written either by a lawyer or specifically for a lawyer. Mr Stanley Brogden's Australia's Two-Airline Policy is such a book and its paper jacket states that the book is of particular interest for students of economics, public administration, business administration, political science and for general readers and libraries. Since, however, the Melbourne University Press is noted for its publication of serious and scholarly works, and further, because the two-airline policy cannot properly be understood without an adequate grasp of the legal and constitutional framework in which it operates, it seems quite proper to make an assessment of Mr Brogden's work. Mr Brogden is a very experienced aviation writer as the book will quickly demonstrate. It is the purpose of this review not only to assess the book on its merits but also to supplement the account of the two-airline policy by a closer examination of legal issues and some observations on the future implications of the policy.

Invasive emergent and floating macrophytes can have detrimental impacts on aquatic ecosystems. Management of these aquatic weeds frequently relies upon foliar application of aquatic herbicides. However, there is inherent variability of overspray (herbicide loss) for foliar applications into waters within and adjacent to the targeted treatment area. The spray retention (tracer dye captured) of four invasive broadleaf emergent species (water hyacinth, alligatorweed, creeping water primrose, and parrotfeather) and two emergent grass-like weeds (cattail and torpedograss) were evaluated. For all species, spray retention was simulated using foliar applications of rhodamine WT (RWT) dye as a herbicide surrogate under controlled mesocosm conditions. Spray retention of the broadleaf species was first evaluated using a CO2-pressurized spray chamber overtop dense vegetation growth or no plants (positive control) at a greenhouse (GH) scale. Broadleaf species and grass-like species were then evaluated in larger outdoor mesocosms (OM). These applications were made using a CO2-pressurized backpack sprayer. Evaluation metrics included species-wise canopy cover and height influence on in-water RWT concentration using image analysis and modeling techniques. Results indicated spray retention was greatest for water hyacinth (GH, 64.7 ± 7.4; OM, 76.1 ± 3.8). Spray retention values were similar among the three sprawling marginal species alligatorweed (GH, 37.5 ± 4.5; OM, 42 ± 5.7), creeping water primrose (GH, 54.9 ± 7.2; OM, 52.7 ± 5.7), and parrotfeather (GH, 48.2 ± 2.3; OM, 47.2 ± 3.5). Canopy cover and height were strongly correlated with spray retention for broadleaf species and less strongly correlated for grass-like species. Although torpedograss and cattail were similar in percent foliar coverage, they differed in percent spray retention (OM, 8.5± 2.3 and 28.9 ±4.1, respectively). The upright leaf architecture of the grass-like species likely influenced the lower spray retention values in comparison to the broadleaf species.

Unoccupied aerial application systems (UAAS) are gaining popularity for weed management to increase applicator safety and to deliver herbicide treatments where treatment sites limit ground-based spray equipment. Several studies have documented UAAS application strategies and procedures for weed control in terrestrial settings, yet literature describing remote spray technology for use in aquatics remains limited. Currently, applicators seek guidance for UAAS deployment for aquatic weed management to overcome site access restrictions, deal with environmental limitations, and improve ground-based applicator safety in hazardous treatment scenarios. In the present case studies, we evaluate a consumer-available UAAS to deliver the herbicide, florpyrauxifen-benzyl, as both foliar and directed in-water spray applications. The first case study showed that the invasive floating-leaved plant, yellow floating heart, was controlled 80% to 99% by 6 wk after treatment (WAT) following UAAS foliar herbicide treatments. The second case study demonstrated that UAAS directed in-water herbicide application reduced variable-leaf watermilfoil visible plant material by 94% at 5 WAT. Likewise, directed in-water applications from UAAS eliminated the need to deploy watercraft, which improved overall operational efficiency. Data from both case studies indicate that UAAS can provide an effective and efficient treatment strategy for floating-leaved and submersed plant control among common herbicide treatment scenarios. Future integration of UAAS in aquatic weed control programs is encouraged, especially among smaller treatment sites (≤4 ha) or where access limits traditional spray operations.

Expanding the current aquatic herbicide portfolio, reducing total spray volumes, or remotely delivering herbicide using novel spray technologies could improve management opportunities targeting invasive aquatic plants, where options are more limited. However, research on giant salvinia (Salvinia molesta Mitchell) response to foliar herbicide applications at carrier volumes ≤140 L ha−1 is incomplete. Likewise, no data exist documenting S. molesta control with unoccupied aerial application systems (UAAS). Following the recent >100-ha incursion of S. molesta in Gapway Swamp, NC, a case study was developed to provide guidance for ongoing management efforts. In total, three field trials evaluated registered aquatic and experimental herbicides using a 140 L ha−1 carrier volume. Select foliar applications from UAAS were also evaluated. Results at 8 wk after treatment (WAT) indicated the experimental protoporphyrinogen oxidase inhibitor, PPO-699-01 (424 g ai ha−1), in combination with endothall dipotassium salt (2,370 g ae ha−1) provided 78% visual control, whereas control when PPO-699-01 (212 g ai ha−1) was applied alone was lower at 35%. Evaluations also showed diquat (3,136 g ai ha−1) alone, glyphosate (4,539 g ae ha−1) alone, and metsulfuron-methyl (42 g ai ha−1) alone achieved 86% to 94% visual plant control at 8 WAT. Sequential foliar applications of diquat, flumioxazin (210 g ai ha−1), and carfentrazone (67 g ai ha−1) at 6 wk following exposure to in-water fluridone treatments were no longer efficacious by 6 WAT due to plant regrowth. Carfentrazone applications made from a backpack sprayer displayed greater control than applications made with UAAS deploying identical carrier volumes at 2 WAT; however, neither application method provided effective control at 8 WAT. Additional field validation is needed to further guide management direction of S. molesta control using low carrier volume foliar applications.

Invasive aquatic plants constantly threaten freshwaters and associated environs globally. Water resource managers frequently seek new control tactics to combat invasive macrophytes, especially when the availability of herbicides registered for submersed plant control is limited. The synthetic auxin herbicide, florpyrauxifen-benzyl, recently registered (2018) for aquatic site applications in the United States, has shown success in controlling several invasive aquatic weeds. Studies were conducted to evaluate responses of native and invasive submersed plants to florpyrauxifen-benzyl under growth chamber conditions to provide insight on the selectivity of varying herbicide concentrations in New Zealand. Florpyrauxifen-benzyl concentrations evaluated ranged from 0.01 to 107.86 µg ai L−1, encompassing the maximum use concentration (48 µg L−1) for submersed plant applications. Dose–response metrics indicated the New Zealand native species watermilfoil [Myriophyllum triphyllum Orchard] was highly sensitive to florpyrauxifen-benzyl following a 21-d static exposure, having a dry weight 50% effective concentration (EC50) value of 1.2 µg L−1. The invasive species oxygen-weed [Lagarosiphon major (Ridley) Moss] and Canadian waterweed (Elodea canadensis Michx.) were less sensitive, with dry weight EC50 values of 35.4 and >107.86 µg L−1, respectively. Brazilian waterweed (Egeria densa Planch.) was most tolerant to the tested concentrations, as EC50 values were not achieved. Overall, results indicate florpyrauxifen-benzyl demonstrates potential for controlling L. major, with further large-scale screening required to confirm control among field site applications. As the native species (M. triphyllum) was most sensitive to florpyrauxifen-benzyl compared with the invasive plant evaluated (I/N ratio indicated >31.3 times more sensitive), any targeted concentration used for invasive plant control for field applications would likely injure the native M. triphyllum plants. Future studies should investigate additional native and invasive species for management guidance and consider how exposure times influence plant response using similar florpyrauxifen-benzyl concentrations tested in the present study.

This paper presents the current state of mathematical modelling of the electrochemical behaviour of lithium-ion batteries (LIBs) as they are charged and discharged. It reviews the models developed by Newman and co-workers, both in the cases of dilute and moderately concentrated electrolytes and indicates the modelling assumptions required for their development. Particular attention is paid to the interface conditions imposed between the electrolyte and the active electrode material; necessary conditions are derived for one of these, the Butler–Volmer relation, in order to ensure physically realistic solutions. Insight into the origin of the differences between various models found in the literature is revealed by considering formulations obtained by using different measures of the electric potential. Materials commonly used for electrodes in LIBs are considered and the various mathematical models used to describe lithium transport in them discussed. The problem of upscaling from models of behaviour at the single electrode particle scale to the cell scale is addressed using homogenisation techniques resulting in the pseudo-2D model commonly used to describe charge transport and discharge behaviour in lithium-ion cells. Numerical solution to this model is discussed and illustrative results for a common device are computed.

Additional active ingredients are needed for use in aquatic systems to respond to new threats or treatment scenarios, enhance selectivity, reduce use rates, and mitigate the risk of herbicide resistance. Florpyrauxifen-benzyl is a new synthetic auxin developed for use as an aquatic herbicide. A study was conducted at North Carolina State University in which 10 µg L−1 of 25% radiolabeled florpyrauxifen-benzyl was applied to the isolated shoot tissue of 10 different aquatic plant species to elucidate absorption and translocation patterns in these species. Extremely high levels of shoot absorption were observed for all species, and uptake was rapid. Highest shoot absorptions were observed for crested floatingheart [Nymphoides cristata (Roxb.) Kuntze] (A192 = 20 µg g−1), dioecious hydrilla [Hydrilla verticillata (L. f.) Royle] (A192 = 25.3 µg g−1), variable watermilfoil (Myriophyllum heterophyllum Michx.) (A192 = 40.1 µg g−1), and Eurasian watermilfoil (Myriophyllum spicatum L.) (A192 = 25.3 µg g−1). Evidence of translocation was observed in all rooted species tested, with the greatest translocation observed in N. cristata (1.28 µg g−1 at 192 h after treatment). The results of this study add to the growing body of knowledge surrounding the behavior of this newly registered herbicide within aquatic plants.

In recent years, unmanned aerial vehicle (UAV) technology has expanded to include UAV sprayers capable of applying pesticides. Very little research has been conducted to optimize application parameters and measure the potential of off-target movement from UAV-based pesticide applications. Field experiments were conducted in Raleigh, NC during spring 2018 to characterize the effect of different application speeds and nozzle types on target area coverage and uniformity of UAV applications. The highest coverage was achieved with an application speed of 1 m s−1 and ranged from 30% to 60%, whereas applications at 7 m s−1 yielded 13% to 22% coverage. Coverage consistently decreased as application speed increased across all nozzles, with extended-range flat-spray nozzles declining at a faster rate than air-induction nozzles, likely due to higher drift. Experiments measuring the drift potential of UAV-applied pesticides using extended-range flat spray, air-induction flat-spray, turbo air–induction flat-spray, and hollow-cone nozzles under 0, 2, 4, 7, and 9 m s−1 perpendicular wind conditions in the immediate 1.75 m above the target were conducted in the absence of natural wind. Off-target movement was observed under all perpendicular wind conditions with all nozzles tested but was nondetectable beyond 5 m away from the target. Coverage from all nozzles exhibited a concave-shaped curve in response to the increasing perpendicular wind speed due to turbulence. The maximum target coverage in drift studies was observed when the perpendicular wind was 0 and 8.94 m s−1, but higher turbulence at the two highest perpendicular wind speeds (6.71 and 8.94 m s−1) increased coverage variability, whereas the lowest variability was observed at 2.24 m s−1 wind speed. Results suggested that air-induction flat-spray and turbo air–induction flat-spray nozzles and an application speed of 3 m s−1 provided an adequate coverage of target areas while minimizing off-target movement risk.

Early in a foodborne disease outbreak investigation, illness incubation periods can help focus case interviews, case definitions, clinical and environmental evaluations and predict an aetiology. Data describing incubation periods are limited. We examined foodborne disease outbreaks from laboratory-confirmed, single aetiology, enteric bacterial and viral pathogens reported to United States foodborne disease outbreak surveillance from 1998–2013. We grouped pathogens by clinical presentation and analysed the reported median incubation period among all illnesses from the implicated pathogen for each outbreak as the outbreak incubation period. Outbreaks from preformed bacterial toxins (Staphylococcus aureus, Bacillus cereus and Clostridium perfringens) had the shortest outbreak incubation periods (4–10 h medians), distinct from that of Vibrio parahaemolyticus (17 h median). Norovirus, salmonella and shigella had longer but similar outbreak incubation periods (32–45 h medians); campylobacter and Shiga toxin-producing Escherichia coli had the longest among bacteria (62–87 h medians); hepatitis A had the longest overall (672 h median). Our results can help guide diagnostic and investigative strategies early in an outbreak investigation to suggest or rule out specific etiologies or, when the pathogen is known, the likely timeframe for exposure. They also point to possible differences in pathogenesis among pathogens causing broadly similar syndromes.

The stellar winds of hot stars have an important impact on both stellar and galactic evolution, yet their structure and internal processes are not fully understood in detail. One of the best nearby laboratories for studying such massive stellar winds is the O4I(n)fp star ζ Pup. After briefly discussing existing X-ray observations from Chandra and XMM, we present a simulation of X-ray emission line profile measurements for the upcoming 840 kilosecond Chandra HETGS observation. This simulation indicates that the increased S/N of this new observation will allow several major steps forward in the understanding of massive stellar winds. By measuring X-ray emission line strengths and profiles, we should be able to differentiate between various stellar wind models and map the entire wind structure in temperature and density. This legacy X-ray spectrum of ζ Pup will be a useful benchmark for future X-ray missions.

Background: EMBRACE (NCT02462759) Part 1 is a randomized, double-blind, sham-procedure controlled study assessing safety/tolerability of intrathecal nusinersen (12-mg equivalent dose) in symptomatic infants/children with SMA who were not eligible to participate in ENDEAR or CHERISH. Methods: Eligible participants had onset of SMA symptoms at ≤6 months with 3 SMN2 copies; onset at ≤6 months, age >7 months and 2 copies; or onset at >6 months, age ≤18 months, and 2/3 copies. Safety/tolerability was the primary endpoint. Exploratory endpoints included Hammersmith Infant Neurological Examination Section 2 (HINE-2) motor milestone attainment, change in ventilator use, and growth. Results: EMBRACE Part 1 was terminated early based on positive results from ENDEAR. Safety/tolerability was similar to previous trials. More nusinersen-treated (11/14;79%) vs. sham–treated individuals (2/7;29%) were HINE-2 motor milestone responders. Between Day 183 and 302, mean (SD) hours of ventilator use changed by +1.236 (3.712) hours in nusinersen-treated (n=12) and +2.123 (3.023) hours in sham–treated individuals (n=7). Similar increases in weight and body length were observed in nusinersen-treated and sham–treated individuals by Day 183. Conclusions: In EMBRACE Part 1, nusinersen demonstrated a favorable benefit-risk profile. These results add to the aggregated efficacy, safety/tolerability data of nusinersen in SMA.

Study Supported by: Ionis and Biogen

Research has shown both production and health benefits for the use of chicory (Cichorium intybus) within ruminant diets. Despite this, little was known about the effects of this forage, containing differing fatty acid profiles and secondary plant compounds compared with ryegrass, on beef stability, fatty acid composition or sensory properties. An experiment was conducted to investigate whether the inclusion of chicory in the diet of grazing beef steers would alter these three properties in the M. Longissimus muscle when compared with beef steers grazing perennial ryegrass (Lolium perenne). Triplicate 2 ha plots were established with a chicory (cv. Puna II)/perennial ryegrass mix or a perennial ryegrass control. A core group of 36 Belgian Blue – cross steers were used within a 2-year beef finishing experiment (n=6/replicate plot). In the 2nd grazing year, steers were slaughtered as they reached a target fat class of 3. Muscle pH was checked 2 and 48 h post-slaughter. A section of the hindloin joint containing the M. Longissimus lumborum muscle was removed and a 20 mm-thick steak was cut and muscle samples were taken for analysis of vitamin E and fatty acid analysis. The remaining section of the loin was vacuum packed in modified atmosphere packs and subjected to simulated retail display. A section of the conditioned loin was used for sensory analysis. Data on pH, vitamin E concentration and colour stability in a simulated retail display showed there were no effects of including chicory in the diet of grazing beef steers on meat stability. There were also no differences found in the fatty acid composition or the overall eating quality of the steaks from the two treatments. In conclusion, there were no substantive effects of including chicory in the swards of grazing beef cattle on meat stability, fatty acid composition or sensory properties of the M. Longissimus muscle when compared with beef steers grazing ryegrass-only swards.

Woody plant encroachment restricts forage production and capacity to produce grazing livestock. Biophysical plant growth simulation and economic simulation were used to evaluate a prescribed burning range management technique. Modeling systems incorporated management practices and costs, historical climate data, vegetation and soil inventories, livestock production data, and historical regional livestock prices. The process compared baseline non-treatment return estimates to expected change in livestock returns resulting from prescribed burning. Stochastic analyses of production and price variability produced estimates of greater net returns resulting from use of prescribed burning relative to the baseline.

The effect of weather variation on pesticide losses was estimated with the Erosion-Productivity Impact Calculator (EPIC) model. Weather variations had little effect on pesticide loss from a hypothetical site near Memphis, TN, but the effect was more dramatic and in the expected direction at Des Moines, IA. Atrazine losses at Des Moines were reduced by lowering relative humidity or rainfall intensity. Increasing the CO2 level from 300 to 660 ppm slightly increased atrazine losses. Results from these two sites are very limited and only serve to demonstrate modeling potential for addressing weather/pesticide problems. Further, more comprehensive studies are needed to better estimate pesticide loss sensitivity to weather variation.

Government support uncertainty, scarce yield information, and the inherent risk in bioeconomic phenomena are some of the deterrents faced by investors in the nascent cellulosic biofuel industry. A financial probabilistic model was developed to contrast the economic feasibility of producing cellulosic biofuels from energy cane and sweet sorghum using three technologies: hydrolysis, pyrolysis, and gasification. Hydrolysis and pyrolysis proved feasible (showed possibilities of a positive net present value) without government support and conditioned to stochastic feedstock yields and biofuel prices. Gasification was feasible with government support. Improved feedstock and biofuel productivity would considerably raise the feasibility probabilities for hydrolysis and pyrolysis without government support.

Absorption coefficient (k), infinite reflectance (Ri), and scattering coefficient (s) were tabulated for five wavelengths and analyzed for statistical differences for seven weed species. The wavelengths were: 0.55 μm, 0.65 μm, 0.85 μm, 1.65 μm, and 2.20 μm. The Ri of common lambsquarters (Chenopodium album L.), johnsongrass [Sorghum halepense (L.) Pers.], and annual sowthistle (Sonchus oleraceus L.) leaves at the 0.85-μm wavelength were significantly (p = 0.05) higher than for sunflower (Helianthus annuus L.), ragweed parthenium (Parthenium hysterophorus L.), or London rocket (Sisymbrium irio L.). Annual sowthistle had the largest k value, and Palmer amaranth (Amaranthus palmeri S. Wats.) had the smallest k value at the 0.65-μm chlorophyll absorption wavelength. In general, johnsongrass, ragweed parthenium, or London rocket had the largest s values among the five wavelengths, whereas annual sowthistle and Palmer amaranth were usually lowest.

Virginia creeper and wild grape are troublesome perennial vines that often infest Christmas tree plantations. Field studies were conducted to evaluate Fraser fir injury and Virginia creeper and wild grape control with directed applications of triclopyr (1,680 g ai/ha) alone and in combination with 2,4-D (1,120 g ai/ha), clopyralid (280 g ai/ha), and halosulfuron (36 g ai/ha). Additional treatments included 2,4-D, clopyralid, glyphosate (1,120 g ai/ha), halosulfuron, hexazinone (560 g ai/ha), mesotrione (105 g ai/ha), and sulfometuron (71 g ai/ha) applied alone; and a mixture of hexazinone plus mesotrione. In the triclopyr-containing treatments, Fraser fir injury ranged from 6 to 13% at 1 mo after treatment (MAT) and was 4 to 8% at 11 MAT. Leader growth was not impacted by the herbicide treatments. At 11 MAT, all triclopyr-containing treatments controlled Virginia creeper 93 to 98% and wild grape 98 to 100%, which was greater than the control observed with glyphosate at 63 and 59%, respectively. Virginia creeper and wild grape control with 2,4-D was 88 to 90%. Clopyralid, halosulfuron, hexazinone, hexazinone plus mesotrione, mesotrione, and sulfometuron provided less than 66% control of both perennial vines. Directed applications of triclopyr-containing treatments or 2,4-D were effective management tools for selective removal of wild grape and Virginia creeper from Fraser fir Christmas tree plantations. Additional research is needed on the potential sensitivity of other commonly grown Christmas tree species to triclopyr-containing treatments.

Synthetic auxin herbicides are commonly used in forage, pasture, range, and turfgrass settings for dicotyledonous weed control. Aminocyclopyrachlor (AMCP) is a newly developed pyrimidine carboxylic acid with a chemical structure and mode of action similar to the pyridine carboxylic acids—aminopyralid, clopyralid, and picloram. Injury to sensitive dicotyledonous plants has been observed following exposure to monocotyledonous plant material previously treated with pyridine compounds. The absorption, translocation, and metabolism of AMCP has been documented in susceptible broadleaf weeds; however, no information is available, to our knowledge, regarding AMCP fate in tolerant Poaceae, which may serve as the vector for off-target plant injury. Based on this premise, research was conducted to characterize absorption, translocation, and metabolism of AMCP in tall fescue. 14C-AMCP was applied to single tiller tall fescue plant foliage under controlled laboratory conditions at North Carolina State University (Raleigh, NC). Radiation was quantified in leaf wash, treated leaf, foliage, crown, roots, and root exudates at 3, 12, 24, 48, 96, and 192 h after treatment (HAT). 14C-AMCP was rapidly absorbed by tall fescue, reaching 38 and 68% at 3 and 48 HAT, respectively. Translocation of 14C-AMCP was limited to the foliage, which reached maximum translocation (34%) at 96 HAT. Most of the recovered 14C-AMCP remained in the leaf wash, treated leaf, or foliage, whereas minimal radiation was detected in the crown, roots, or root exudates throughout the 192-h period. No AMCP metabolism was observed in tall fescue through the 192 HAT. These data suggest AMCP applied to tall fescue can remain bioavailable, and mishandling treated plant material could result in off-target injury.

The synthetic auxin herbicides, aminocyclopyrachlor and clopyralid, control dicotyledonous weeds in turf. Clippings of turfgrass treated with synthetic auxin herbicides have injured off-target plants exposed to herbicide-laden clippings. Labels of aminocyclopyrachlor and clopyralid recommend that clippings of treated turfgrass remain on the turf following a mowing event. Alternative uses for synthetic auxin-treated turfgrass clippings are needed because large quantities of clippings on the turf surface interfere with the functionality and aesthetics of golf courses, athletic fields, and residential turf. A white clover bioassay was conducted to determine the persistence and bioavailability of aminocyclopyrachlor and clopyralid in turfgrass clippings. Aminocyclopyrachlor and clopyralid were each applied at 79 g ae ha−1 to mature tall fescue at 56, 28, 14, 7, 3.5, and 1.75 d before clipping collection (DBCC). Clippings were collected, and the treated clippings were recycled onto adjacent white clover plots to determine herbicidal persistence and potential for additional weed control. Clippings of tall fescue treated with aminocyclopyrachlor produced a nonlinear regression pattern of response on white clover. Calculated values for 50% response (GR50) for visual control, for normalized difference vegetative index (NDVI), and for reduction in harvested biomass were 20.5, 17.3, and 18.7 DBCC, respectively, 8 wk after clippings were applied. Clippings of tall fescue treated with clopyralid did not demonstrate a significant pattern for white clover control, presumably because clopyralid was applied at a less-than-label rate. The persistence and bioavailability of synthetic auxin herbicides in clippings harvested from previously treated turfgrass creates the opportunity to recycle clippings for additional weed control.