The enthalpy of hydration of natural clinoptilolite was determined by isothermal immersion calorimetry on Ca-, Na- and K-exchanged clinoptilolite (Fish Creek Mountains, Nevada). Heats of immersion of clinoptilolite were determined at initial H2O contents ranging from θ = 0.02 to 0.85 (where θ is the ratio [H2O content]/[maximum H2O content]). The heat of immersion (liquid H2O reference state) of Ca-clinoptilolite ranged from -7.5 (θ = 0.87) to -25.7 kJ/mol-H2O (θ = 0.19); values for Na-clinoptilolite ranged from -6.3 (θ = 0.85) to -21.8 kJ/mol-H2O (θ = 0.11); and values for K-clinoptilolite ranged from -7.7 (θ = 0.80) to -24.6 kJ/mol-H2O (θ = 0.02). Linear regression of the calorimetric data provided the following values for the complete heat of immersion (from θ = 0): Ca-clinoptilolite, -30.3 ± 2.0; Na-clinoptilolite, -23.4 ± 0.6; and K-clinoptilolite, -22.4 ± 0.8 kJ/mol-H2O.

The heat of immersion measurements were compared with the enthalpy of hydration results of Carey and Bish (1996) determined in a thermogravimetric study of the same samples. The heat of immersion data are similar but of smaller magnitude than the values of enthalpy of hydration and are believed to be more accurate because they represent direct measurements of this thermodynamic property.

The effect of dehydration of clinoptilolite on the thermal evolution of the potential high-level radioactive waste repository at Yucca Mountain was considered by comparing the amount of energy consumed by clinoptilolite dehydration with the amount of energy necessary to heat rocks lacking hydrous minerals. The extra energy consumed on heating clinoptilolite from 25 to 200 °C ranges between 70 and 80% in excess of that required for nondehydrating materials (that is, clinoptilolite acts as a heat sink). These results indicate that accurate thermohydrologic modeling of rock units at Yucca Mountain should consider the thermal effect of dehydration/hydration processes in clinoptilolite and other hydrous minerals, in addition to the water produced/adsorbed during heating/cooling.

Smectites are clay minerals that expand and contract dramatically in response to changes in water vapor pressure. The expansion/contraction behavior of smectite has considerable importance in engineering applications (such as the stability of building foundations and the integrity of clay barriers) and affects hydrologic properties. To understand this behavior we have analyzed several purified, homoionic smectite standards over a wide range of relative humidities using X-ray powder diffraction (XRD) and a new computer-automated humidity-control system.

Humidity was controlled by mixing dry N2 with H2O-saturated (“wet”) N2 produced with a gas-washing bubbler held in a constant-temperature bath set at 35°C. Mixing of wet and dry N2 was controlled with automated MKS mass-flow controllers.