To meet the high-precision positioning requirements for hybrid machining units, this article presents a geometric error modeling and source error identification methodology for a serial–parallel hybrid kinematic machining unit (HKMU) with five axis. A minimal kinematic error modeling of the serial–parallel HKMU is established with screw-based method after elimination of redundant errors. A set of composite error indices is formulated to describe the terminal accuracy distribution characteristics in a quantitative manner. A modified projection method is proposed to determine the actual compensable and noncompensable source errors of the HKMU by identifying such transformable source errors. Based on this, the error compensation and comparison analysis are carried out on the exemplary HKMU to numerically verify the effectiveness of the proposed modified projection method. The geometric error evaluations reveal that the parallel module has a larger impacts on the terminal accuracy of the platform of the HKMU than the serial module. The error compensation results manifest that the modified projection method can find additional compensable source errors and significantly reduce the average and maximum values of geometric errors of the HKMU. Hence, the proposed methodology can be applied to improve the accuracy of kinematic calibration of the compensable source errors and can reduce the difficulty and workload of tolerance design for noncompensable source errors of such serial–parallel hybrid mechanism.

Breast cancer is a high-risk disease with a high mortality rate among women. Chemotherapy plays an important role in the treatment of breast cancer. However, chemotherapy eventually results in tumours that are resistant to drugs. In recent years, many studies have revealed that the activation of Wnt/β-catenin signalling is crucial for the emergence and growth of breast tumours as well as the development of drug resistance. Additionally, drugs that target this pathway can reverse drug resistance in breast cancer therapy. Traditional Chinese medicine has the properties of multi-target and tenderness. Therefore, integrating traditional Chinese medicine and modern medicine into chemotherapy provides a new strategy for reversing the drug resistance of breast tumours. This paper mainly reviews the possible mechanism of Wnt/β-catenin in promoting the process of breast tumour drug resistance, and the progress of alkaloids extracted from traditional Chinese medicine in the targeting of this pathway in order to reverse the drug resistance of breast cancer.

Evidence of couples’ BMI and its influence on birth weight is limited and contradictory. Therefore, this study aims to assess the association between couple’s preconception BMI and the risk of small for gestational age (SGA)/large for gestational age (LGA) infant, among over 4·7 million couples in a retrospective cohort study based on the National Free Pre-pregnancy Checkups Project between 1 December 2013 and 30 November 2016 in China. Among the live births, 256 718 (5·44 %) SGA events and 506 495 (10·73 %) LGA events were documented, respectively. After adjusting for confounders, underweight men had significantly higher risk (OR 1·17 (95 % CI 1·15, 1·19)) of SGA infants compared with men with normal BMI, while a significant and increased risk of LGA infants was obtained for overweight and obese men (OR 1·08 (95 % CI 1·06, 1·09); OR 1·19 (95 % CI 1·17, 1·20)), respectively. The restricted cubic spline result revealed a non-linear decreasing dose–response relationship of paternal BMI (less than 22·64) with SGA. Meanwhile, a non-linear increasing dose–response relationship of paternal BMI (more than 22·92) with LGA infants was observed. Moreover, similar results about the association between maternal preconception BMI and SGA/LGA infants were obtained. Abnormal preconception BMI in either women or men were associated with increased risk of SGA/LGA infants, respectively. Overall, couple’s abnormal weight before pregnancy may be an important preventable risk factor for SGA/LGA infants.

As an attractive collector medium for hypervelocity particles, combined with outstanding physical properties and suitable compositional characteristics, SiO2 aerogel has been deployed on outer space missions and laser shock-loaded collection experiments. In this paper, impact experiments were conducted to understand the penetration process of irregular grains, irregular Al2O3 grains with two different sizes and speeds (~110 μm@7 km/s, ~251 μm@2.3 km/s) at various density silica aerogels. By classifying the shapes of projectile residues and tracks, the morphology of tracks was analyzed. It was observed that there were several kinds of typical tracks in the penetration of irregular grains, accompanied by residues with the shapes of near-sphere, polyhedron, streamlined body wedge, and rotator. The rotational behavior was demonstrated by the final status of one flake projectile as direct evidence. In addition, there was no obvious relationship between the track length and experimental parameters, which may be caused by the uncertain interaction between aerogels and irregular particles. In addition, it confirmed the existence of fragmentation, melting situation by observing the shape of the impact entrance hole. At the same time, optical coherence tomography was used to observe the detail of tracks clearly, which provided a method to characterize the tracks nondestructively.

Anaemia is a global public health problem affecting women worldwide, and reproductive-age women are at increased risk. We conducted a population-based cross-sectional study analysing the prevalence of overall anaemia and anaemia according to severity in Chinese pre-pregnant women to update current knowledge on anaemia epidemiology. Based on the National Free Preconception Check-up Projects supported by the Chinese government, 5 679 782 women participating in this project in 2017 were included in the present study. The cyanmethemoglobin method was applied to assess Hb concentrations. Univariate and multivariate logistic regressions were applied for associated factors. The prevalence of anaemia among Chinese pre-pregnant women was 21·64 % (mild: 14·10 %, moderate: 7·17 % and severe : 0·37 %). The prevalence of overall and severe anaemia was the highest in Tibet and the lowest in Beijing among thirty-one provinces. Women’s age, region, ethnic origin, educational level, occupation and pregnancy history were all correlated with anaemia. Women with B blood type (adjusted OR (aOR) = 0·89), higher BMI (overweight: aOR = 0·84; obesity: aOR = 0·70) and alcohol consumption (aOR = 0·69) were less likely to have anaemia, while those with rhesus negative blood type (aOR = 1·10), history of anaemia (aOR = 2·60), older age at menarche (aOR = 1·19), heavy menstrual blood loss (aOR = 1·39), longer menstrual period (aOR = 1·09) and shorter menstrual cycle (aOR = 1·08) were more likely to suffer from anaemia. Meat or egg eaters were not significantly associated with severe anaemia. Anaemia is of moderate public health significance among Chinese pre-pregnant women. Interventions should be considered to prevent anaemia to the greatest extent possible to avoid potential harm in this population.

Spatial profiles of impurity emission measurements in the extreme ultraviolet (EUV) spectroscopic range in radiofrequency (RF)-heated discharges are combined with one-dimensional and three-dimensional transport simulations to study the effects of resonant magnetic perturbations (RMPs) on core impurity accumulation at EAST. The amount of impurity line emission mitigation by RMPs appears to be correlated with the ion Z for lithium, carbon, iron and tungsten monitored, i.e. stronger suppression of accumulation for heavier ions. The targeted effect on the most detrimental high-Z impurities suggests a possible advantage using RMPs for impurity control. Profiles of transport coefficients are calculated with the STRAHL one-dimensional impurity transport code, keeping $\nu /D$ fixed and using the measured spatial profiles of $\textrm{F}{\textrm{e}^{20 + }}$, $\textrm{F}{\textrm{e}^{21 + }}$ and $\textrm{F}{\textrm{e}^{22 + }}$ to disentangle the transport coefficients. The iron diffusion coefficient ${D_{\textrm{Fe}}}$ increases from $1.0- 2.0\;{\textrm{m}^2}\;{\textrm{s}^{ - 1}}$ to $1.5- 3.0\;{\textrm{m}^2}\;{\textrm{s}^{ - 1}}$ from the core region to the edge region $(\rho \gt 0.5)$ after the onset of RMPs. Meanwhile, an inward pinch of iron convective velocity ${\nu _{\textrm{Fe}}}$ decreases in magnitude in the inner core region and increases significantly in the outer confined region, simultaneously contributing to preserving centrally peaked $\textrm{Fe}$ profiles and exhausting the impurities. The ${D_{\textrm{Fe}}}$ and ${\nu _{\textrm{Fe}}}$ variations lead to reduced impurity contents in the plasma. The three-dimensional edge impurity transport code EMC3-EIRENE was also applied for a case of RMP-mitigated high-Z accumulation at EAST and compared to that of low-Z carbon. The exhaust of ${\textrm{C}^{6 + }}$ toward the scrape-off layer accompanying an overall suppression of heavier ${\textrm{W}^{30 + }}$ is observed when using RMPs.

Iodine intake and excretion vary widely; however, these variations remain a large source of geometric uncertainty. The present study aims to analyse variations in iodine intake and excretion and provide implications for sampling in studies of individuals or populations. Twenty-four healthy women volunteers were recruited for a 12-d sampling period during the 4-week experiment. The duplicate-portion technique was used to measure iodine intake, while 24-h urine was collected to estimate iodine excretion. The mean intra-individual variations in iodine intake, 24-h UIE (24-h urinary iodine excretion) and 24-h UIC (24-h urinary iodine concentration) were 63, 48 and 55 %, respectively, while the inter-individual variations for these parameters were 14, 24 and 32 %, respectively. For 95 % confidence, approximately 500 diet samples or 24-h urine samples should be taken from an individual to estimate their iodine intake or iodine status at a precision range of ±5%. Obtaining a precision range of ±5% in a population would require twenty-five diet samples or 150 24-h urine samples. The intra-individual variations in iodine intake and excretion were higher than the inter-individual variations, which indicates the need for more samples in a study on individual participants.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

There is a dearth of data on the iodine balance studies of Chinese population. In the present study, we aimed to explore the appropriate recommended nutrient intake (RNI) of iodine based on healthy Chinese women. A 4-week study was conducted in twenty-five Chinese euthyroid women. Uniform diets with different iodine contents were provided in two different periods, in which non-iodised salt was given in the first 3 weeks, followed by 1 week of iodised salt administration. The total iodine intake from diet, water and air as well as the total iodine excretion through urine, faeces and respiration were monitored and determined. The sweat iodine loss was also considered. Moreover, the regression curve model was established between the 24 h iodine intake and 24 h iodine excretion. The 24 h iodine intake in the two periods was 194·8 (sd 62·9) and 487·1 (sd 177·3) μg/d, respectively. The 24 h iodine excretion was 130·9 (sd 39·5) and 265·4 (sd 71·8) μg/d, respectively. Both 24 h iodine intake and 24 h iodine excretion of the two periods were significantly different (all P<0·05). The iodised salt contributed approximately 62·7 % of the total daily iodine intake. Moreover, 92·3 % (277/300) of samples were in positive balance, while twenty-three cases were in negative balance. Our data show that the estimated average requirement for iodine was 110·5 μg/d. Therefore, the RNI for iodine to non-pregnant, non-lactating Chinese women was 154·7 μg/d.

The microstructure evolution of the directionally solidified NiAl–Cr(Mo) planar eutectic lamellar structure was studied at 1150 °C and times of up to 400 h. The planar eutectic lamellar structure is obtained at the withdrawal rate range of 2.5–7.5 μm/s. The interlamellar spacing decreases gradually with increasing the withdrawal rate. The lamellar termination (like angular or smooth) commonly exists in the as-DS alloy. After high temperature treatment, the lamellar structure at 2.5 μm/s (interlamellar spacing, 3.7 μm) is almost stable, only a little migration of termination occurs at 400 h. When the withdrawal rate increases to 4.5 μm/s, the coarsening and migration of termination occur at 200 h. The adjacently coarsened terminations assemble when the coarsening processes to a certain degree, thus resulting in the formation of the blocky Cr(Mo) phase. Similarly, the above instable phenomenon occurs at 7.5 μm/s. The relevant instability mechanisms are discussed.

We designed a resorcinol-formaldehyde (RF) sol–gel ink for direct ink writing of the microlattices. To improve the formability, the fresh microlattices were strengthened by surface catalysis with HCl atmosphere. After supercritical drying and carbonization, the sample’s specific surface area was 631 m2/g and the average pore size was 3.81 nm. Both RF aerogel and carbonized RF aerogel samples had millimeter-scale pore, micron-scale pore, and nanoscale skeleton. The pore and skeleton could provide high surface area and diffusion channels, which were beneficial to the adsorption performances. The carbonized RF aerogel sample fully adsorbed Dulbecco’s modified eagle medium in 250 min, which exhibited a good capacity of quick adsorption and indicated the potential application for cell supports.

Stimulated Brillouin scattering (SBS) effect is currently the major limitation for the power scaling of single-frequency/narrow linewidth fiber laser systems. A single-mode linearly polarized all-fiber amplifier system is set up to investigate SBS effect in triple-frequency high-power amplifiers. With this amplifier, up to 302 W output power with 83% slope efficiency is achieved and the SBS threshold is scaled up to 12 dB. To the best of our knowledge, this is the highest output power of multifrequency laser from a single-mode polarization maintaining fiber. Good spectral properties and high brightness make this laser source available for the application of second harmonic generation, coherent beam combining.

Super-black carbon aerogel sleeves (CAS) with different reflectivities and a clear aperture had been made, by the sol–gel polycondensation of resorcinol (R) and formaldehyde (F) under the catalysis of sodium carbonate (C), and was used to eliminate stray light. We explained that the subwavelength structure is the main factor that leads to the low reflectivity of CA and constructed a simple optical system to measure the exit power from CAS in different directions. We proved that different CASs have different matting effects, and all of these CASs have better matting effects than that of monolithic graphite that has higher reflectivity. To show the fine angular resolution ability of CAS, we measured the faculae from the reflected light of a compact disc and found that the CAS with a clear aperture of 1.0 mm is the best. The super-black CAS could be used in precision optical instruments and to eliminate stray light in the optical.

A stalagmite with high 238U content from Yangkou Cave, China, revealed the evolution of the Asian summer monsoon (ASM) between 49.1 and 59.5 ka, and the δ18O values recorded Dansgaard/Oeschger (D/O) events 13–17. The Yangkou record shows a relatively gradual transition into the D/O 14 and 16 events. The discrepancy between the abrupt and gradual transitions of D/O 14 in the records from northern and southern China, respectively, suggests different responses of the ASM to climate changes in the high northern latitudes. The higher resolution δ18O record and more precise 230Th dating indicate that the timing of D/O 14 and 17 in the Hulu records at 53 and 58 ka should be shifted to 54.3 and 59 ka, respectively. The gradual strengthening of the ASM at the onsets of D/O 16 and 14 in our record is different from the abrupt temperature rise in the northern high latitudes. Some other factors must contribute to this relatively gradual ASM change in southern China, but the actual reason is still unknown.

Thousands of Paleolithic artifacts have been recovered from Paleolithic sites in the Luonan Basin, in the upper South Luohe River of central China. Their discovery suggests that the basin was an important area for hominin settlement during the Pleistocene. However, the initial timing of this occupation and the environmental conditions for this period are still largely unknown. In addition, the sediments are not well dated and most of the artifacts lie on the surface. In an attempt to resolve these issues, a new systemic paleomagnetic analysis was carried out on the loess deposits that contain in situ stone tools. Our detailed loess–paleosol analyses of the stratigraphy of different sites in the basin and Chinese Loess Plateau shows the accumulation of the loess since at least 1.1 million years (Ma) ago. Moreover, recently discovered in situ cores, flakes and retouched stone tools in these deposits show that hominins used this region repeatedly from 0.8–0.7 Ma to 0.4–0.3 and 0.2–0.1 Ma. Pedostratigraphic analyses, magnetic susceptibility and carbon isotope analyses also indicate that these hominins lived in a subtropical to warm-temperate climate with broad-needle-leaf forest vegetation mixed with grasses.

In this study, the effects of HA combined with NPK fertilizer (HANPK) on root growth and leaf quality of tobacco plants were investigated in tobacco fields. Results indicated that the application of HA alone did not enhance the growth of tobacco obviously, while HANPK increased tobacco biomass by 36.9% and stimulated the growth of lateral roots significantly. The number of the second-order lateral roots was increased by 89.3% compared with the control. Furthermore, HANPK raised the ratio of root biomass in 0–20 cm soil layer over the whole soil layer and increased the proportion of fine roots over the total roots. Tobacco leaf yield, output value, and benefit of HANPK were 12.2%, 29.4% and 35.5% higher than those of the control, respectively. The above results suggest that the combined application of HA and NPK chemical fertilizer is an economical pattern for improving tobacco growth.

CALIFA data show that isolated disk galaxies present a common gas-phase metallicity gradient, with a characteristic slope of -0.1dex/re between 0.3 and 2 disk effective radius re (Sanchez et al. 2014). Here we construct a simple model to investigate which processes regulate the formation and evolution.

The microstructure, room temperature compressive property, and elevated temperature tensile property of directionally solidified NiAl–Cr(Mo)–(Hf,Dy) hypereutectic alloy were investigated. The directional solidifications of liquid metal cooling technique (LMC) and zone melted liquid metal cooling technique (ZMLMC) were adopted. In the LMC alloy, the well-aligned and fully eutectic lamellar structure parallel to the growth direction is obtained. The interlamellar spacing gradually decreases with increasing the withdrawal rate, and the compressive yield strength gradually increases. In the ZMLMC alloy, the eutectic lamellar structure is disordered and not parallel to the growth direction, and the quantities of Cr(Mo) primary phases are observed. Compared to the ZMLMC alloy, the LMC alloy has a better combination property because of the well-aligned lamellar structure. The observations of crack propagation and fracture surface are performed to better understand the fracture behavior.