Burial diagenetic reactions of di- and trioctahedral clay minerals were compared in Brazilian offshore, basinal sediment sequences of Cretaceous age. Originally dioctahedral smectite-rich shales of three basins—Potiguar,Ceara, and Ilha de Santana—exhibited the classical smectite-to-illite burial pattern. Trioctahedral clay-rich shales and trioctahedral clay-mineral cements in sandstones, however, showed a burial sequence of saponite to mixed-layer chlorite/saponite with progressive increase in the percentage of chlorite layers with increasing burial depth.

The change from disordered to ordered interstratifications of chlorite/saponite occurred in the temperature range 60°-70°C at a vitrinite reflectance value of about 0.65. These values are lower than those found for the ordering of illite/smectite clays. Increasing substitution of Al for Si in tetrahedral sites, followed by fixation of interlayer hydroxide sheets was found to be the major chemical change promoting transformation of saponite to chlorite via corrensite.

In urban systems, there is an interdependency between neighborhood roles and transportation patterns between neighborhoods. In this paper, we classify docking stations in bicycle-sharing networks to gain insight into the human mobility patterns of three major cities in the United States. We propose novel time-dependent stochastic block models, with degree-heterogeneous blocks and either mixed or discrete block membership, which classify nodes based on their time-dependent activity patterns. We apply these models to (1) detect the roles of bicycle-sharing stations and (2) describe the traffic within and between blocks of stations over the course of a day. Our models successfully uncover work blocks, home blocks, and other blocks; they also reveal activity patterns that are specific to each city. Our work gives insights for the design and maintenance of bicycle-sharing systems, and it contributes new methodology for community detection in temporal and multilayer networks with heterogeneous degrees.

This article is a summary of perspectives on training curricula from child and adolescent psychiatry trainees globally. We aimed to identify the relative strengths, weaknesses and gaps in learning needs from a trainee's perspective. The 20 early-career child psychiatrists who contributed are from 16 countries and represent all the five continents. We could identify some global challenges as well as local/regional challenges that need to be addressed to develop competent child psychiatrists.

A trend toward greater body size in dizygotic (DZ) than in monozygotic (MZ) twins has been suggested by some but not all studies, and this difference may also vary by age. We analyzed zygosity differences in mean values and variances of height and body mass index (BMI) among male and female twins from infancy to old age. Data were derived from an international database of 54 twin cohorts participating in the COllaborative project of Development of Anthropometrical measures in Twins (CODATwins), and included 842,951 height and BMI measurements from twins aged 1 to 102 years. The results showed that DZ twins were consistently taller than MZ twins, with differences of up to 2.0 cm in childhood and adolescence and up to 0.9 cm in adulthood. Similarly, a greater mean BMI of up to 0.3 kg/m2 in childhood and adolescence and up to 0.2 kg/m2 in adulthood was observed in DZ twins, although the pattern was less consistent. DZ twins presented up to 1.7% greater height and 1.9% greater BMI than MZ twins; these percentage differences were largest in middle and late childhood and decreased with age in both sexes. The variance of height was similar in MZ and DZ twins at most ages. In contrast, the variance of BMI was significantly higher in DZ than in MZ twins, particularly in childhood. In conclusion, DZ twins were generally taller and had greater BMI than MZ twins, but the differences decreased with age in both sexes.

For over 100 years, the genetics of human anthropometric traits has attracted scientific interest. In particular, height and body mass index (BMI, calculated as kg/m2) have been under intensive genetic research. However, it is still largely unknown whether and how heritability estimates vary between human populations. Opportunities to address this question have increased recently because of the establishment of many new twin cohorts and the increasing accumulation of data in established twin cohorts. We started a new research project to analyze systematically (1) the variation of heritability estimates of height, BMI and their trajectories over the life course between birth cohorts, ethnicities and countries, and (2) to study the effects of birth-related factors, education and smoking on these anthropometric traits and whether these effects vary between twin cohorts. We identified 67 twin projects, including both monozygotic (MZ) and dizygotic (DZ) twins, using various sources. We asked for individual level data on height and weight including repeated measurements, birth related traits, background variables, education and smoking. By the end of 2014, 48 projects participated. Together, we have 893,458 height and weight measures (52% females) from 434,723 twin individuals, including 201,192 complete twin pairs (40% monozygotic, 40% same-sex dizygotic and 20% opposite-sex dizygotic) representing 22 countries. This project demonstrates that large-scale international twin studies are feasible and can promote the use of existing data for novel research purposes.

One means by which Intolerance of Uncertainty (IU) purports to contribute to anxiety is by increasing Threat Perception (TP). This process was examined by comparing two different definitions of uncertainty: ambiguity versus unpredictability. N = 104 participants were measured for IU and then made worry and TP estimates for four different scenario types: Ambiguous Scenarios (where an outcome could be interpreted as threatening), Unpredictable Positive Scenarios (where a surprising and positive outcome was anticipated), as well as Positive and Negative Scenarios (with certain outcome). Both Ambiguous and Unpredictable Positive Scenarios more strongly predicted the relationship between IU and worry scores than (certain) Positive or Negative Scenarios. The relationship between IU and ‘ambiguous worry’ was largely explained by TP estimates, whereas the relationship between IU and ‘Unpredictable Positive Worry’ was largely independent of TP. Results suggest ambiguity and unpredictability are differentially explained by TP such that they produce different types of response. The authors argue ambiguity and unpredictability are explanatory components within IU.

Whole-grain intake has been reported to be associated with a lower risk of several lifestyle-related diseases such as type 2 diabetes, CVD and some types of cancers. As measurement errors in self-reported whole-grain intake assessments can be substantial, dietary biomarkers are relevant to be used as complementary tools for dietary intake assessment. Alkylresorcinols (AR) are phenolic lipids found almost exclusively in whole-grain wheat and rye products among the commonly consumed foods and are considered as valid biomarkers of the intake of these products. In the present study, we analysed the plasma concentrations of five AR homologues in 2845 participants from ten European countries from a nested case–control study in the European Prospective Investigation into Cancer and Nutrition. High concentrations of plasma total AR were found in participants from Scandinavia and Central Europe and lower concentrations in those from the Mediterranean countries. The geometric mean plasma total AR concentrations were between 35 and 41 nmol/l in samples drawn from fasting participants in the Central European and Scandinavian countries and below 23 nmol/l in those of participants from the Mediterranean countries. The whole-grain source (wheat or rye) could be determined using the ratio of two of the homologues. The main source was wheat in Greece, Italy, the Netherlands and the UK, whereas rye was also consumed in considerable amounts in Germany, Denmark and Sweden. The present study demonstrates a considerable variation in the plasma concentrations of total AR and concentrations of AR homologues across ten European countries, reflecting both quantitative and qualitative differences in the intake of whole-grain wheat and rye.

Metal/high-k dielectric core shell nanocrystal memory capacitor was demonstrated. This kind of MOS memory shows good performance in charge storage capacity, programming and erasing speed. By using a self-assembled Block Co-Polymer, Co/HfO2 core shell nanocrystals were well arrayed and showed uniform dot size and inter distance between dots. Compared with traditional metal nanocrystal fabrication process with E-Beam Evaporation followed by RTA (Rapid Thermal Annealing), core shell nanocrystal memory prepared by Block Co-Polymer produces a wide memory window of 8.4V at the ±12 V voltage sweep. Co/HfO2 core shell nanocrystals prepared by low-temperature Block Co-polymer process ensure high reliability of the devices.

The interfacial regimes of cobalt/pentacene/cobalt (Co/Pc/Co) trilayers were emulated through the ultrathin pentacene/cobalt (Pc/Co) and cobalt/pentacene (Co/Pc) bilayers. Employing the magneto-optical Kerr effect (MOKE) measurement, we found the coercivity of Co bottom film in a thickness of 3.4 nm experienced a slight reduction upon the adsorption of Pc molecules. For the bilayers prepared with reversed order of deposition, the Co film deposited on a 6.4 nm Pc layer showed no observable ferromagnetic order at room temperature until its thickness reached 3 nm. After the onset of magnetic order, the x-ray images acquired on Pc/Co revealed a complicated magnetization patterns comparing to those observed on Co/Pc bilayers. Because the spin-polarized carriers will interact with the environment along their transport path, the presence of a non-magnetic layer and the occurrence of complicated domain structures suggested the spin-polarized carriers would experience a greater disturbance on their spin coherence when crossing the Pc/Co interface.

Highly oriented ?-Al2O3 thin films on 4H-SiC were engineered to demonstrate their potential as a crystalline high-k gate dielectric in SiC power MOSFETs. As-deposited Al2O3 thin films grown on 4H-SiC (0001) by thermal atomic layer deposition (ALD) were amorphous as determined by in-situ reflection high-energy electron diffraction (RHEED). Upon annealing in N2 at 1100°C, the film crystallized to the ?-Al2O3 phase as observed by RHEED, high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). Based on Fourier transforms of the HRTEM image, an epitaxial relationship of ?-Al2O3 (111) on 4H-SiC (0001) was observed in which ?-Al2O3 (-110) is oriented with 4H-SiC (-12-10). This orientation was further confirmed by XRD analysis in which only the ?-Al2O3 (111) and (222) peaks were observed. An abrupt interface of both amorphous and crystalline Al2O3 with 4H-SiC was determined by HRTEM.

A carbothermal reaction process was employed to synthesize nano-sized boron carbide particles. The reactions were carried out by heating a mixture of boric oxide powder and amorphous carbon reactant under a flow of argon atmosphere in a conventional high temperature tube furnace at 1350–1700 °C for 1–4 h. In order to obtain stoichiometric powder product, additional pure boron powder was added to the reaction mixture to compensate for the boron loss in the form of B2O2/B2O3 vapor during the reaction. The effect of the structure and morphology of the precursor materials on that of the products was also investigated. X-ray diffraction (XRD) studies indicated that the powdered product prepared under optimized reaction conditions was crystalline boron carbide. Transmission electron microscopy (TEM) observations showed that the product nanoparticles ranged from 50 nm to 250 nm with the average size between 100 nm and 150 nm depending on the reaction conditions. Some boron carbide particles were as small as 50 nm. Energy dispersive spectroscopy (EDS) was also used to determine the stoichiometry of the boron carbide nanoparticle products.

ZrO2 ([.kappa]∼ 18) was deposited on Si(100) wafers by rapid thermal chemical vapor deposition (RT-CVD) process to replace SiO2 as the gate dielectric material in metal-oxide- semiconductor devices for its high dielectric constant, good thermal stability on silicon, and large bandgap. The deposited films are nearly stoichiometric, amorphous, uniform, and highly smooth, as determined by X-ray photoemission spectroscopy, X-ray diffraction, ellipsometry, and atomic force microscopy. The high resolution transmission electron microscopy (TEM) image shows an interfacial ZrSiO4 layer between ZrO2 and the silicon substrate, and this interfacial layer is verified by thermodynamic calculations and etching resistance measured at the interface. Excellent step coverage was observed for depositing ZrO2 on nanometer scale features with an aspect ratio of 4. The dielectric constant of RTCVD ZrO2 was 15-18, with small C-V hysteresis and low leakage current.