The effects of the evolution of vortices on the aeroacoustics generated by a hovering wing are numerically investigated by using a hybrid method of an immersed boundary–finite difference method for the three-dimensional incompressible flows and a simplified model based on the Ffowcs Williams-Hawkings acoustic analogy. A low-aspect-ratio ($AR=1.5$) rectangular wing at low Reynolds ($Re=1000$) and Mach ($M=0.04$) numbers is investigated. Based on the simplified model, the far-field acoustics is shown to be dominated by the time derivative of the pressure on the wing surface. Results show that vortical structure evolution in the flow fields, which is described by the divergence of the convection term of the incompressible Navier–Stokes equations in a body-fixed reference frame, determines the time derivative of the surface pressure and effectively the far-field acoustics. It dominates over the centrifugal acceleration and Coriolis acceleration terms in determining the time derivative of the surface pressure. The position of the vortex is also found to affect the time derivative of the surface pressure. A scaling analysis reveals that the vortex acoustic source is scaled with the cube of the flapping frequency.

We report an experimental study of the formation and evolution of laminar thermal structures generated by a small heat source, with a focus on their correlation to the thermal boundary layer and effects of heating time $t_{heat}$. The experiments are performed over the flux Rayleigh number ($Ra_f$) range $2.1\times 10^6 \leq Ra_f \leq 3.6\times 10^{7}$ and the Prandtl number ($Pr$) range $28.6 \leq Pr \leq 904.7$. The corresponding Rayleigh number ($Ra= t_{heat}\,Ra_{f}/\tau _0\,Pr$) range is $900 \leq Ra \leq 4\times 10^{4}$, where $\tau _0$ is a diffusion time scale. For thermal structures generated by continuous heating (i.e. starting plumes), their formation process exists three characteristic times that are well reflected by changes in the thermal boundary layer thickness. These characteristic times, denoted as $t_{emit}$, $t_{recover}$ and $t_{static}$, correspond to the moments when the plume emission begins and completes, and when the thermal boundary layer becomes quasi-static, respectively. Their $Ra_f$–$Pr$ dependencies are found to be $t_{emit}/\tau _0\sim Ra_f^{-0.41}\,Pr^{0.41}$, $t_{recover}/\tau _0\sim Ra_f^{-0.48}\,Pr^{0.48}$ and $t_{static}/\tau _0\sim Ra_f^{-0.49}\,Pr^{0.33}$, respectively. Thermal structures generated by finite $t_{heat}$ exhibit similar evolution dynamics once $t_{heat} \ge t_{emit}$, with the accelerating stage behaving like starting plumes and the decay stage like thermals (i.e. a finite amount of buoyant fluids). It is further found that their maximum rising velocity experiences a transition in the $Ra$-dependence from $Ra$ to $(Ra\ln Ra)^{0.5}$ at $Ra \simeq 6000$; and their maximum acceleration reaches the value of starting plumes at $t_{heat}\simeq t_{recover}$, and remains unchanged for larger $t_{heat}$. In particular, the maximum rising velocity for the cases with $t_{heat} = t_{recover}$ follows a scaling relation $Ra_f^{0.37}\,Pr^{-0.37}$, in contrast to the relation $Ra_f^{0.48}\,Pr^{-0.48}$ for starting plumes. This study provides a more comprehensive understanding of laminar thermal structures, which are relevant to a range of processes in nature and laboratory systems such as Rayleigh–Bénard convection.

Understanding user perceptions of interacting with the virtual world is one of the research focuses in recent years, given the rapid proliferation of virtual reality (VR) and driven to establish the metaverse. Users can generate a familiar connection between their bodies and the virtual world by being embodied in virtual hands, and hand representations can induce users’ embodiment in VR. The sense of embodiment represents the cognitive awareness of one's manifestation and includes three subcomponents: the sense of body ownership, agency and self-location. There is insufficient evidence in the literature about the effects of hand designs on the embodiment, especially based on studying its three subcomponents. This study investigates how virtual hand designs with five realism levels influence the three subcomponents of embodiment in VR. This research employs a self-report questionnaire commonly used in the literature to assess embodiment and evaluates agency and self-location by introducing implicit methods (intentional binding and proprioceptive measurement) derived from psychology. Besides, the objective data of eye tracking is used to explore the connection between embodiment and hand designs, and classifying participants’ eye tracking data to help analyze the link between embodiment and user attention. Overall, this research makes a major contribution through a systematic exploration of users’ embodied experience in VR and offers important evidence of the effects of virtual hand designs on body ownership, agency, and self-location, respectively. In addition, this study provides a valuable reference for further investigation of embodiment through implicit and objective methods, and practical design recommendations for virtual hand design in VR applications.

Computer-aided design (CAD) plays an essential role in creative idea generation on 2D screens during the design process. In most CAD scenarios, virtual object translation is an essential operation, and it is commonly used when designers simulate their innovative solutions. The degrees of freedom (DoF) of virtual object translation modes have been found to directly impact users’ task performance and psychological aspects in simulated environments. Little is known in the existing literature about the sense of agency (SoA), which is a critical psychological aspect emphasizing the feeling of control, in translation modes on 2D screens during the design process. Hence, this study aims to assess users’ SoA in virtual object translation modes on mouse-based, touch-based, and handheld augmented reality (AR) interfaces through subjective and objective measures, such as self-report, task performance, and electroencephalogram (EEG) data. Based on our findings in this study, users perceived a greater feeling of control in 1DoF translation mode, which may help them come up with more creative ideas, than in 3DoF translation mode in the design process; additionally, the handheld AR interface offers less control feel, which may have a negative impact on design quality and creativity, as compared with mouse- and touch-based interfaces. This research contributes to the current literature by analyzing the association between virtual object translation modes and SoA, as well as the relationship between different 2D interfaces and SoA in CAD. As a result of these findings, we propose several design considerations for virtual object translation on 2D screens, which may enable designers to perceive a desirable feeling of control during the design process.

The COVID-19 pandemic is reshaping the landscape of Chinese dispute resolution. The aim of this article is to outline China's various approaches to such development in times of global pandemic. The article primarily examines the features of online arbitration in China with a special focus on the significance of party autonomy and the authority of the tribunal in handling virtual hearings. This trend prompts the question as to whether virtual hearings and the use of digital technology ensure the protection of data and privacy. Further, the article analyses the impacts of online dispute resolution on litigation and different sets of new rules adopted in China to handle online hearings. It concludes that China successfully addressed most of the raised questions in terms of data and privacy protection, and that the processes through which dispute resolution becomes increasingly digitalised seems to be an irreversible trend that warrants further research into its consequences.

It is crucial to understand the genetic mechanisms and biological pathways underlying the relationship between obesity and serum lipid levels. Structural equation models (SEMs) were constructed to calculate heritability for body mass index (BMI), total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), and the genetic connections between BMI and the four classes of lipids using 1197 pairs of twins from the Chinese National Twin Registry (CNTR). Bivariate genomewide association studies (GWAS) were performed to identify genetic variants associated with BMI and lipids using the records of 457 individuals, and the results were further validated in 289 individuals. The genetic background affecting BMI may differ by gender, and the heritability of males and females was 71% (95% CI [.66, .75]) and 39% (95% CI [.15, .71]) respectively. BMI was positively correlated with TC, TG and LDL-C in phenotypic and genetic correlation, while negatively correlated with HDL-C. There were gender differences in the correlation between BMI and lipids. Bivariate GWAS analysis and validation stage found 7 genes (LOC105378740, LINC02506, CSMD1, MELK, FAM81A, ERAL1 and MIR144) that were possibly related to BMI and lipid levels. The significant biological pathways were the regulation of cholesterol reverse transport and the regulation of high-density lipoprotein particle clearance (p < .001). BMI and blood lipid levels were affected by genetic factors, and they were genetically correlated. There might be gender differences in their genetic correlation. Bivariate GWAS analysis found MIR144 gene and its related biological pathways may influence obesity and lipid levels.

Low molecular weight glutenin subunits (LWM-GSs) play a crucial role in determining wheat flour processing quality. In this work, 35 novel LMW-GS genes (32 active and three pseudogenes) from three Aegilops umbellulata (2n = 2x = 14, UU) accessions were amplified by allelic-specific PCR. We found that all LMW-GS genes had the same primary structure shared by other known LMW-GSs. Thirty-two active genes encode 31 typical LMW-m-type subunits. The MZ424050 possessed nine cysteine residues with an extra cysteine residue located in the last amino acid residue of the conserved C-terminal III, which could benefit the formation of larger glutenin polymers, and therefore may have positive effects on dough properties. We have found extensive variations which were mainly resulted from single-nucleotide polymorphisms (SNPs) and insertions and deletions (InDels) among the LMW-GS genes in Ae. umbellulata. Our results demonstrated that Ae. umbellulata is an important source of LMW-GS variants and the potential value of the novel LMW-GS alleles for wheat quality improvement.

Athetis lepigone Möschler (Lepidoptera, Noctuidae) is a common maize pest in Europe and Asia. However, there is no long-term effective management strategy is available yet to suppress its population. Adults rely heavily on olfactory cues to locate their optimal host plants and oviposition sites. Pheromone-binding proteins (PBPs) are believed to be responsible for recognizing and transporting different odorant molecules to interact with receptor membrane proteins. In this study, the ligand-binding specificities of two AlepPBPs (AlepPBP2 and AlepPBP3) for sex pheromone components and host plant (maize) volatiles were measured by fluorescence ligand-binding assay. The results demonstrated that AlepPBP2 had a high affinity with two pheromones [(Z)-7-dodecenyl acetate, Ki = 1.11 ± 0.1 μM, (Z)-9-tetradecenyl acetate, Ki = 1.32 ± 0.15 μM] and ten plant volatiles, including (-)-limonene, α-pinene, myrcene, linalool, benzaldehyde, nonanal, 2-hexanone, 3-hexanone, 2-heptanone and 6-methyl-5-hepten-2-one. In contrast, we found that none of these chemicals could bind to AlepPBP3. Our results clearly show no significant differences in the functional characterization of the binding properties between AlepPBP2 and AlepPBP3 to sex pheromones and host plant volatiles. Furthermore, molecular docking was employed for further detail on some crucial amino acid residues involved in the ligand-binding of AlepPBP2. These findings will provide valuable information about the potential protein binding sites necessary for protein-ligand interactions which appear as attractive targets for the development of novel technologies and management strategies for insect pests.

High-Mg andesites (HMAs) are crucial for the reconstruction of plate tectonics, continental margin formation and lithospheric evolution. In this study, we present new fossil age, whole-rock geochemical and Sr–Nd isotope data on the newly discovered Dundunshan Group HMAs in the Dundunshan area of the Beishan orogen (central-southern Central Asian Orogenic Belt). The Dundunshan HMA samples are characterized by high MgO (6.47–7.02 wt%) contents and high Mg# values (67.27–68.77), with SiO2 (58.57–62.13 wt%), Al2O3 (14.49–16.07 wt%) and CaO (5.05–6.24 wt%) resembling typical HMAs. The Dundunshan HMA samples are calc-alkaline and strongly enriched in light rare earth elements (LREEs) and large-ion lithophile elements (LILEs), with slightly negative Eu anomaly and high-field-strength element (HFSE) depletions. Their (87Sr/86Sr)i ratios (0.7041–0.7057) and ϵNd(t) (3.73–5.59) indicate that the Dundunshan HMAs were mainly formed by the interactions between subducted oceanic sediment-derived melts and mantle peridotites. Fossil evidence and published radiometric age data constrain the formation of the Dundunshan HMAs to early Late Devonian time. Sedimentological features of the Middle Devonian Sangejing Formation and regional tectonic correlation suggest that the Hongliuhe–Niujuanzi–Xichangjing Ocean in the Dundunshan area was likely closed during late Middle Devonian time, and that the Dundunshan HMAs were formed in a post-collision extensional setting.

The orogenic process and crustal growth of the Changning–Menglian Palaeo-Tethys orogenic belt in the southeastern Tibetan Plateau is not fully understood. Triassic Caojian rhyolites and granites occur extensively in this orogenic belt and represent important constraints for this issue. This study aims to examine the relationships between the Triassic Caojian rhyolites and granites and to gain a better understanding of their possible petrogenesis. The study used zircon U–Pb geochronology, trace element analyses and Sr–Nd–Hf isotope data to better understand the relationships and possible origin of the rhyolites and granites. Recent zircon U–Pb ages indicated that the Caojian rhyolites were emplaced at 227.2 Ma, whereas age estimates for Caojian granites were slightly older (233.4–236.9 Ma). The Caojian rhyolites are enriched in large-ion lithophile elements and high-field-strength elements, with elevated FeOtot/MgO and Ga/Al ratios. However, they are significantly depleted in Ba, Sr, Eu, P and Ti. These geochemical characteristics indicate that they have an A-type affinity. Furthermore, the Caojian granites comprise biotite monzogranites and granodiorites and show unfractionated composition. Mineralogically, the Caojian granites were found to contain diagnostic I-type minerals such as hornblende. Geochemical data suggest that the petrogenesis of the Triassic Caojian rhyolites is characterized by rejuvenation of crystal mush represented by the Triassic Caojian granites. The necessary thermal input was supplied by mafic magma. This magmatic evolution was likely related to lithospheric delamination and upwelling of the asthenosphere during the Mid- to Late Triassic, forming post-collisional I-type granites and A-type volcanics in the Changning–Menglian Palaeo-Tethys orogenic belt.

We report on a power-scalable sub-100-fs laser in the 2-μm spectral range using a Tm3+-doped ‘mixed’ (Lu,Sc)2O3 sesquioxide ceramic as an active medium. Pulses as short as 58 fs at 2076 nm with an average output power of 114 mW at a pulse repetition rate of approximately 82.9 MHz are generated by employing single-walled carbon nanotubes as a saturable absorber. A higher average power of 350 mW at 2075 nm is obtained at the expense of the pulse duration (65 fs). A maximum average power of 486 mW is achieved for a pulse duration of 98 fs and an optical conversion efficiency of 22.3%, representing the highest value ever reported from sub-100-fs mode-locked Tm lasers.

Background: We investigated the contact status of medical staff with confirmed or suspected patients with COVID-19 in Sichuan Province, China, as well as the use of personal protective equipment at the time of contact, and we explored the factors affecting the effective use of personal protective equipment. Methods: We performed a cross-sectional study by distributing a questionnaire on occupational protection and exposure of medical staff in the diagnosis and treatment of COVID-19 using a convenience sampling method for online surveys from February 23 to February 29, 2020. Results: In total, 13,829 valid questionnaires from 644 hospitals in Sichuan Province were retrieved, and 802 people were exposed to confirmed or suspected patients with COVID-19, accounting for 5.80%. 688 (85.79%) of 802 people who reported that they had taken effective personal protection measures for each exposure. Sex, work department, and length of service were the independent factors influencing the effective use of personal protective equipment in multivariate analysis (P < .05). Conclusions: Medical institutions need to continue to strengthen the training regarding standard precautions and personal protection, especially for general departments other than fever clinics and isolation wards, as well as medical staff with few working years, to ensure the occupational safety of medical staff.

Funding: No

Disclosures: None

This paper asked participants to assess four selected expert-rated Taiwan International Student Design Competition (TISDC) products using four methods: Consensual Assessment Technique (CAT), Creative Product Semantic Scale (CPSS), Product Creativity Measurement Instrument (PCMI), and revised Creative Solution Diagnosis Scale (rCSDS). The results revealed that, between experts and non-experts, the ranking results by the CAT and CPSS were the same, while the ranking results of the rCSDS were different. The CAT, CPSS, and TISDC methods provided the same results indicating that raters may return the same results on creativity assessment, and the results are not affected by the selected methods.

If it is necessary to use non-experts to assess creativity and the creativity results are expected to be the same with that of experts, asking non-expert raters to use CPSS to assess creativity and then ranking the creativity score is more reliable. The study offers a contribution to the creativity domain on deciding which methods may be more reliable from a comparison perspective.

We report an experimental study of the Prandtl-number effects in quasi-two-dimensional (quasi-2-D) Rayleigh–Bénard convection. The experiments were conducted in four rectangular convection cells over the Prandtl-number range of $11.7 \leqslant Pr \leqslant 650.7$ and over the Rayleigh-number range of $6.0\times 10^8 \leqslant Ra \leqslant 3.0\times 10^{10}$. Flow visualization reveals that, as $Pr$ increases from 11.7 to 145.7, thermal plumes pass through the central region much less frequently and their self-organized large-scale motion is more confined along the periphery of the convection cell. The large-scale flow is found to break down for higher $Pr$, resulting in a regime transition in the Reynolds number $Re$. For the $Pr$ range with a large-scale flow of system size, the $Re$ number, Nusselt number $Nu$ and local temperature fluctuations were investigated systematically. It is found that $Re$ scales as $Re \sim Ra^{0.58}Pr^{-0.82}$ in the present geometry, which suggests that it is in line with the behaviour in the 2-D configuration. On the other hand, the measured $Nu(Ra, Pr)$ relation $Nu \sim Ra^{0.289}Pr^{-0.02}$ tends to be compatible with the finding in a three-dimensional (3-D) system. For the temperature fluctuations in the cell centre and near the sidewall, they exhibit distinct $Ra$-dependent scalings that could not be accounted for with existing theories, but their $Pr$ dependences for $Pr \lesssim 50$ are in agreement with the predictions by Grossmann & Lohse (Phys. Fluids, vol. 16, 2004, pp. 4462–4472). These results enrich our understanding of quasi-2-D thermal convection, and its similarities and differences compared to 2-D and 3-D systems.