Previous studies revealed that consuming spicy food reduced mortality from CVD and lowered stroke risk. However, no studies reported the relationship between spicy food consumption, stroke types and dose–response. This study aimed to further explore the association between the frequency of spicy food intake and the risk of stroke in a large prospective cohort study. In this study, 50 174 participants aged 30–79 years were recruited. Spicy food consumption data were collected via a baseline survey questionnaire. Outcomes were incidence of any stroke, ischaemic stroke (IS) and haemorrhagic stroke (HS). Multivariable-adjusted Cox proportional hazard models estimated the association between the consumption of spicy food and incident stroke. Restricted cubic spline analysis was used to examine the dose–response relationship. During the median 10·7-year follow-up, 3967 strokes were recorded, including 3494 IS and 516 HS. Compared with those who never/rarely consumed spicy food, those who consumed spicy food monthly, 1–2 d/week and 3–5 d/week had hazard ratio (HR) of 0·914 (95 % CI 0·841, 0·995), 0·869 (95 % CI 0·758, 0·995) and 0·826 (95 % CI 0·714, 0·956) for overall stroke, respectively. For IS, the corresponding HR) were 0·909 (95 % CI 0·832, 0·994), 0·831 (95 % CI 0·718, 0·962) and 0·813 (95 % CI 0·696, 0·951), respectively. This protective effect showed a U-shaped dose–response relationship. For obese participants, consuming spicy food ≥ 3 d/week was negatively associated with the risk of IS. We found the consumption of spicy food was negatively associated with the risk of IS and had a U-shaped dose–response relationship with risk of IS. Individuals who consumed spicy food 3–5 d/week had a significantly lowest risk of IS.

Strike-slip earthquakes near major subduction zones have received less attention than thrust or reverse earthquakes in subduction zone areas. The occurrence of the 2018 Palu Mw 7.5 earthquake in eastern Indonesia provides an unprecedented opportunity to investigate the characteristics of one of these events. The Palu earthquake occurred on the left-lateral, north–south-striking Palu–Koro fault, which is the main plate boundary structure accommodating the convergence between blocks in a triple junction area. It excited a significant tsunami, which unusually is associated with strike-slip earthquakes, and also ruptured at a supershear speed, which is mostly observed on strike-slip faults in continents. Based on our fieldwork, we speculate that the normal slip component of the offshore rupture section in Palu bay on the middle segment probably favours tsunami genesis. Our field investigation has revealed evidence of a simple geometry as well as slip partitioning of dip-slip and strike-slip motion on two subparallel strands on the main segment, both of which may have contributed to the supershear of the rupture propagation. Instead of only a transtensive behaviour of the middle segment, our results also illustrate the transpressional property of the northern and southern rupture segments, which shows more complex behaviour than that of a common continental strike-slip fault.

The rhoptry kinase 18 of Toxoplasma gondii (TgROP18) has been identified as a key virulence factor that allows the parasite to escape from host immune defences and promotes its proliferation in host cells. Although much research is focused on the interaction between host cells and TgROP18, the development of monoclonal antibodies (mAbs) against TgROP18 has not been reported till date. To produce mAbs targeting TgROP18, two hybridomas secreting mAbs against TgROP18, designated as A1 and T2, were generated using cell fusion technology. The subtypes of the A1 and T2 mAbs were identified as IgG3 λ and IgM κ, and peptide scanning revealed that the core sequences of the antigenic epitopes were 180LRAQRRRSELVFE192 and 351NYFLLMMRAEADM363, respectively. The T2 mAb specifically reacted with both T. gondii type I and Chinese I, but not with T. gondii type II, Plasmodium falciparum or Schistosoma japonicum. Finally, the sequences of heavy chain and light chain complementarity-determining regions of T2 were amplified, cloned and characterized, making the modification of the mAb feasible in the future. The development of mAbs against TgROP18 would aid the investigation of the molecular mechanisms underlying the modulation of host cellular functions by TgROP18, and in the development of strategies to diagnose and treat Toxoplasmosis.

We tested whether the proportion of typical sentences in a series of auditory sentences would lead people to adjust the strength of activation of world knowledge (i.e., retrieval rules adaptation) during comprehension. This issue is important because it could help clarify how people efficiently integrate different memory information in cognitive processes. In two experiments, all task materials were presented to participants as a whole package, in which proportions of typical sentences, with typical final locations, varied under different conditions. In Experiment 1, the proportion of typical sentences was equal to the atypical ones (i.e., 50% typical vs. 50% atypical), whereas in Experiment 2, the proportion of typical sentences was not equal to the atypical ones (i.e., 75% typical vs. 25% atypical, and 25% typical vs. 75% atypical). Visual fixation on the critical area in a visual display before/while hearing the critical words was compared across conditions, and across-condition differences were used as an index of the adaptation of the retrieval rule in the activation of world knowledge. The findings indicated that the adaptation of retrieval rules occurs throughout the whole test package of sentence comprehension, and the strength of activation of world knowledge in sentence comprehension can be adjusted.

We incorporate deep learning (DL) into tiled aperture coherent beam combining (CBC) systems for the first time, to the best of our knowledge. By using a well-trained convolutional neural network DL model, which has been constructed at a non-focal-plane to avoid the data collision problem, the relative phase of each beamlet could be accurately estimated, and then the phase error in the CBC system could be compensated directly by a servo phase control system. The feasibility and extensibility of the phase control method have been demonstrated by simulating the coherent combining of different hexagonal arrays. This DL-based phase control method offers a new way of eliminating dynamic phase noise in tiled aperture CBC systems, and it could provide a valuable reference on alleviating the long-standing problem that the phase control bandwidth decreases as the number of array elements increases.

Maternal supraphysiological estradiol (E2) environment during pregnancy leads to adverse perinatal outcomes. However, the influence of oocyte exposure to high E2 levels on perinatal outcomes remains unknown. Thus, a retrospective cohort study was conducted to explore the effect of high E2 level induced by controlled ovarian stimulation (COH) on further outcomes after frozen embryo transfer (FET). The study included all FET cycles (n = 10,581) between 2014 and 2017. All cycles were categorized into three groups according to the E2 level on the day of the human Chorionic Gonadotropin trigger. Odds ratios (ORs) and their confidence intervals (CIs) were calculated to evaluate the association between E2 level during COH and pregnancy outcomes and subsequent neonatal outcomes. From our findings, higher E2 level was associated with lower percentage of chemical pregnancy, clinical pregnancy, ongoing pregnancy, and live birth as well as increased frequency of early miscarriage. Preterm births were more common among singletons in women with higher E2 level during COH (aOR1 = 1.93, 95% CI: 1.22–3.06; aOR2 = 2.05, 95% CI: 1.33–3.06). Incidence of small for gestational age (SGA) was more common in both singletons (aOR1 = 2.01, 95% CI: 1.30–3.11; aOR2 = 2.51, 95% CI: 1.69–3.74) and multiples (aOR1 = 1.58, 95% CI: 1.03–2.45; aOR2 = 1.99, 95% CI: 1.05–3.84) among women with relatively higher E2 level. No association was found between high E2 level during COH and the percentage of macrosomia or large for gestational age. In summary, oocyte exposure to high E2 level during COH should be brought to our attention, since the pregnancy rate decreasing and the risk of preterm birth and SGA increasing following FET.

Image stitching is important for the perception and manipulation of undersea robots. In spite of a well-developed technique, it is still challenging for undersea images because of their inevitable appearance ambiguity caused by the limited light in the undersea environment, and local disturbance caused by moving objects, ocean current, etc. To get a clean and stable background panorama in the undersea environment, this paper proposes an undersea image-stitching method by introducing graph-based registration and blending procedures. Specifically, in the registration procedure, matching the features in each undersea image pair is formulated and solved by graph matching, to incorporate the structural information between features. In the blending procedure, an energy function on the indirect graph Markov random field is proposed, which takes both image consistency and neighboring consistency into consideration. Coincidentally, both graph matching and energy minimization can be mathematically formulated by integer quadratic programming problems with different constraints; the recently proposed graduated nonconvexity and concavity procedure is used to optimize both problems. Experiments on both synthetic images and real-world undersea images witness the effectiveness of the proposed method.

Residual strain often occurs in metal when it was subjected to the tension load, random vibration, or high impact. The mild steel was selected as the research object, and the feasibility of using nonlinear ultrasonic technique to characterize the residual strain was investigated in this paper. First, the mild steel specimens were stretched to several different kinds of stress, then the nonlinear effect as well as the microstrain of each sample was measured. The results indicate that the microstrain increases with increasing applied stress and reaches a maximum value of about 0.036% as the tensile stress increases to the elastic limit. Compared with the original specimen, the nonlinear parameter of tensile specimen gradually increased within the elastic limit. This result reveals that the variation of nonlinear parameter was related to microstrain in mild steel, because the microstructure observation demonstrated that the dislocation structure was basically unchanged within the elastic limit. This research indicates that the nonlinear ultrasonic method has the promising potential to characterize the microstrain in metals.

High-peak-power transform-limited narrow-linewidth nanosecond all-fiber lasers are desired in a range of applications. However, their linewidths will be broadened by self-phase modulation (SPM). We propose a novel concept that generates transform-limited laser pulses by temporally shaping the pulse seed. The impact of the pulse shape on SPM-induced spectral broadening was studied numerically and experimentally. It was found theoretically that the square-shape pulsed laser is immune to SPM-induced spectral broadening. Based on this principle, we built a high-peak-power, linearly polarized, square-shape nanosecond all-fiber laser in a master oscillator power amplifier (MOPA) configuration. Stimulated Brillouin scattering (SBS) limited peak powers of 4.02 kW, 5.06 kW, 6.52 kW and 9.30 kW were obtained at pulse widths of 8 ns, 7 ns, 6 ns and 5 ns. Thanks to the square-shape pulsed seed, the linewidths at maximum peak power remained at 129.5 MHz, 137.6 MHz, 156.2 MHz and 200.1 MHz, respectively, close to the transform-limited values of 110.8 MHz, 126.6 MHz, 147.7 MHz and 177.3 MHz.

To produce pulses with good flat-top quality, pulse-forming lines (PFLs) have been widely used in the field of Tesla-type pulse generators. To shorten the physical length of the PFL, a double-width PFL (DWPFL) is proposed that doubles the output pulse width while maintaining flat-top quality. A repetitively 10 GW Tesla-type long-pulse generator producing pulses with flat-top width of about 110 ns was developed with a coaxial DWPFL to produce high-current electron beams. Electron beams of about 10 GW with flat-top widths of about 110 ns were obtained on a planar vacuum diode load. With this pulse generator and a C-band high-power microwave system, microwaves of ~2.2 GW power and full-width at half-maximum of 101 ns were generated. The experiment demonstrates the feasibility and ideal output waveform quality of the DWPFL.

Barium-rich silicates were recently found in the lower Cambrian black shale sequence of Anhui Province, South China. The Ba silicates can be divided into Ba-poor K-feldspar, Ba-rich K-feldspar and cymrite, on the basis of occurrence and composition. The Ba-poor K-feldspar have low BaO contents (<1.00 wt.%) and occur as sporadic grains in mudstone. In contrast, the Ba-rich K-feldspar have higher BaO contents (1.36–20.51 wt.%) and occur mainly as rims around grains of Ba-poor K-feldspar in mudstone, as void fillings in dolostone, and as grains dispersed in chert. The cymrite is observed only in chert and occurs as dispersed euhedral tabular crystals. Analyses of the Ba-poor K-feldspar and Ba-rich K-feldspar provide compositions that total <100 wt.% and show non-stoichiometry characterized by (Na + K + Ba + Ca)apfu less than 1.00 and (Al + Si)apfu slightly higher than 4.00. Raman and infrared (IR) spectroscopy has revealed the presence of ${\rm NH}_{\rm 4}^{\rm +} $ and H2O in the Ba-rich K-feldspar, which accounts for the unusual composition of these feldspars. We suggest that the formation processes of the Ba-poor K-feldspar, Ba-rich K-feldspar and cymrite were closely associated with multi-stage hydrothermal fluids enriched in Ba and NH4, consistent with an extensional tectonic setting during the early Cambrian. The Ba-poor K-feldspars might have formed through interactions between pre-existing K-feldspars and hydrothermal fluids. The Ba-rich K-feldspars in mudstone and dolostone formed mainly by precipitation from hydrothermal fluids that infiltrated the sediments, and we suggest the Ba-rich K-feldspars and cymrite in the chert are of exhalative hydrothermal origin.

A coaxial-output rolled strip pulse-forming line (RSPFL) with a dry structure is researched for the purpose of miniaturization and all-solid state of pulse-forming lines (PFL). The coaxial-output RSPFL consists of a coaxial-output electrode (COE) and a rolled strip line (RSL). The COE is characterized by quasi-coaxial structure, making the output pulse propagate along the axial direction with a small output inductance. The RSL is rolled on the COE, whose transmission characteristics are analyzed theoretically. It shows that the RSL can be regarded as a planar strip line when the rolling radius of the strip line is larger than 60 times of the thickness of the insulation dielectric layer of RSL. CST modeling was carried out to simulate the discharging characteristic of the coaxial-output RSPFL. It shows that the coaxial-output RSPFL can deliver a discharging pulse with a rise time <6 ns when the impedance of the RSL matches that of the COE, which confirms the theoretical analysis. A prototype of the coaxial-output RSPFL was developed. A 49-kV discharging pulse on a matched load was achieved when it was charged to 100 kV. The discharging waveform has a pulse width of 32 ns, with a rise time of 6 ns, which is consistent with the simulation waveform. An energy-storage density of 1.9 J/L was realized in the coaxial-output RSPFL. By the method of multi-stage connection in series, a much higher output voltage is convenient to be obtained.

The granitic rocks of the Tarim large igneous province (LIP) are temporally and spatially related to mafic intrusions. However, their tectonic setting and genetic relationship are debated. Here, we report geochemical, and zircon U–Pb–Hf isotopic results for three alkali feldspar granitic plutons in the Halajun area, western margin of the Tarim Block. Zircon U–Pb ages suggest these plutons were emplaced at 268–275 Ma, coeval with the neighbouring mafic–ultramafic complexes and syenitic rocks. These granitic rocks have high contents of SiO2, alkalis, Rb, Th, Zr and REE (except Eu), and high ratios of FeO*/MgO and Ga/Al, and show strong depletions in Ba, Sr, Eu, which are commonly observed in the A1-type granites. Zircon Hf isotopes reveal a limited range of εHf(t) values from −1.0 to +3.5 for different samples from three granitic plutons, obviously higher than those (mostly <0) of the mafic rocks. This distinct difference, along with a Daly gap and small volume of mafic rocks, argues against extreme fractionation of mafic magma as the main origin of the A1-type granites. Instead the A1-type granites were most likely derived from partial melting of newly underplated rocks triggered by the upwelling asthenosphere, followed by extensive fractionation. These A1-type granites were emplaced within an anorogenic setting during the late stage of the Tarim LIP, which possibly lasts for more than 30 Ma. The Piqiang mafic–ultramafic complex directly stemmed from asthenospheric mantle and Halajun A1-type granites represent two manners of vertical crustal growth.

The volatile compounds of crofton weed infested by cotton aphids and sprayed with MeJA were collected and analyzed by the TCT-GC/MS technique. The healthy weeds were controls. Seventeen volatiles identified from crofton weed included green leaf odors, monoterpenes and sequiterpenes, and oxo-compounds. Camphene, 2-carene, α-phellandrene, ρ-cymene, and caryophyllene were the major volatiles and constituted about 77% of the total volatile emissions from the control. In the aphid-infested weeds, no new induced component was found. Among the terpenes, ρ-cymene increased markedly in the infested weeds compared with the control, whereas all sesquiterpenes decreased markedly. Levels of endogenous JA in leaves and young stems of the aphid-infested weeds were markedly higher than in the control, whereas both endogenous SA level and ABA level were not significantly different. MeJA sprayed on crofton weed with the aphid infestation had a similar effect on volatile emissions. It is suggested that JA was one of the most important signals in crofton weed and could regulate the emission of volatile compounds.

Supercapacitor has received intense interest due to its high-charge/discharge rate and high-power density. C/Fe2O3 layer with different C/Fe ratios were synthesized by a solution-based approach for supercapacitor application. The influence of synthesis conditions on their electrochemical performances was investigated. Cobalt was added into C/Fe2O3 and significant improved its performance. The optimal C/Fe2O3 sample gives a high specific capacitance of 85.3 F/g and the addition of Co3O4 further increase the capacitance of obtained C/Fe2O3/Co3O4 to 144.4 F/g at 5 A/g. This work demonstrates an efficient supercapacitor application of low-cost metal oxides and facile solution-based synthesis approach.

Thermal stress can induce birefringence in a laser medium, which can cause depolarization of the laser. The depolarization effect will be very severe in a high-average-power laser. Because the depolarization will make the frequency doubling efficiency decline, it should be compensated. In this paper, the thermal characteristics of two kinds of materials are analyzed in respect of temperature, thermal deformation and thermal stress. The depolarization result from thermal stress was simulated. Depolarization on non-uniform pumping was also simulated, and the compensation method is discussed.

The high repetition rate 10 J/10 ns Yb:YAG laser system and its key techniques are reported. The amplifiers in this system have a multi-pass V-shape structure and the heat in the amplifiers is removed by means of laminar water flow. In the main amplifier, the laser is four-pass, and an approximately 8.5 J/1 Hz/10 ns output is achieved in the primary test. The far-field of the output beam is approximately 10 times the diffraction limit. Because of the higher levels of amplified spontaneous emission (ASE) in the main amplifier, the output energy is lower than expected. At the end we discuss some measures that can improve the properties of the laser system.