In the present study, acid-modified attapulgite was used, as an adsorbent, to remove as much Cd2+ as possible from aqueous solution. Static adsorption experiments using powdered acid-modified attapulgite, and dynamic adsorption using granular acid-modifed attapulgite, were conducted to explore the practical application of modified attapulgite in the adsorption of Cd2+. The modified attapulgite had a larger specific surface area and thinner fibrous crystals than the unmodified version. No obvious differences were noted, in terms of the crystal structure, between the natural attapulgite and the modified version. The effects of initial concentration, pH, contact time, and ionic strength on the adsorption of Cd2+ were investigated, and the results showed that the adsorption capacity of the modified attapulgite was increased with increasing pH and the initial Cd2+ concentration. The adsorption properties were analyzed by means of dynamic adsorption tests with respect to various Cd2+ concentrations and flow rates. The maximum adsorption capacity of 8.83 mg/g occurred at a flow rate of 1 mL/min and at an initial concentration of 75 mg/L. Because there was better accord between the data and a pseudo-second order model than a pseudo-first-order model, external mass transfer is suggested to be the rate-controlling process. The experimental data were also fitted for the intraparticle diffusion model, implying that the intraparticle diffusion of Cd2+ onto the modified attapulgite was also important for controlling the adsorption process. The Bohart-Adams model was more suitable than the Thomas model for describing the dynamic behavior with respect to the flow rate and the initial Cd2+ concentration. This research provided the theoretical basis for the dynamic adsorption of Cd2+ on the modified attapulgite. Compared to the powdered modified attapulgite, the dynamic adsorption by granular modified attapulgite appeared more favorable in terms of practical application.

Solute–surface interactions have garnered considerable interest in recent years as a novel control mechanism for driving unique fluid dynamics and particle transport with potential applications in fields such as biomedicine, the development of microfluidic devices and enhanced oil recovery. In this study, we will discuss dispersion induced by the diffusioosmotic motion near a charged wall in the presence of a solute concentration gradient. Here, we introduce a plug of salt with a Gaussian distribution at the centre of a channel with no background flow. As the solute diffuses, the concentration gradient drives a diffusioosmotic slip flow at the walls, which results in a recirculating flow in the channel; this, in turn, drives an advective flux of the solute concentration. This effect leads to cross-stream diffusion of the solute, altering the effective diffusivity of the solute as it diffuses along the channel. We derive theoretical predictions for the solute dynamics using a multiple-time-scale analysis to quantify the dispersion driven by the solute–surface interactions. Furthermore, we derive a cross-sectionally averaged concentration equation with an effective diffusivity analogous to that from Taylor dispersion. In addition, we use numerical simulations to validate our theoretical predictions.

Dietary antioxidant indices (DAI) may be potentially associated with relative telomere length (RTL) of leucocytes. This study aimed to investigate the relationship between DAI and RTL. A cross-sectional study involving 1656 participants was conducted. A generalised linear regression model and a restricted cubic spline model were used to assess the correlation of DAI and its components with RTL. Generalised linear regression analysis revealed that DAI (β = 0·005, P = 0·002) and the intake of its constituents vitamin C (β = 0·043, P = 0·027), vitamin E (β = 0·088, P < 0·001), Se (β = 0·075, P = 0·003), and Zn (β = 0·075, P = 0·023) were significantly and positively correlated with RTL. Sex-stratified analysis showed that DAI (β = 0·006, P = 0·005) and its constituents vitamin E (β = 0·083, P = 0·012), Se (β = 0·093, P = 0·006), and Zn (β = 0·092, P = 0·034) were significantly and positively correlated with RTL among females. Meanwhile, among males, only vitamin E intake (β = 0·089, P = 0·013) was significantly and positively associated with RTL. Restricted cubic spline analysis revealed linear positive associations between DAI and its constituents’ (vitamin E, Se and Zn) intake and RTL in the total population. Sex-stratified analysis revealed a linear positive correlation between DAI and its constituents’ (vitamin E, Se and Zn) intake and RTL in females. Our study found a significant positive correlation between DAI and RTL, with sex differences.

The motion of finite-length cylindrical rods moving near a planar rigid surface is a scenario common across many engineering and natural settings. We study the low-Reynolds-number flow around finite rods that are allowed to rotate or translate in directions perpendicular or parallel to the plane. We develop a three-dimensional lubrication theory to characterize the pressure and hydrodynamic resistances of the cylinders through a special consideration of the cylinder's end effects. In addition, we use three-dimensional numerical simulations to solve these Stokes flows for cylinders of varying lengths and with varying gap sizes between the cylinder and plane, and the numerical results support the developed analytical descriptions. We also use visualizations of the flow to provide qualitative insights and rationalize the effect of the ends on the dynamics of the cylinders. The numerical simulations and theoretical predictions show good agreement in the long (isolated ends) and short (disk-like) limits.

With the characteristics of full autonomy and no accumulated errors, polarisation navigation shows tremendous prospects in underwater scenarios. In this paper, inspired by the polarisation vision of aquatic organisms, a novel point-source polarisation sensor with high spectral adaptability (400 nm–760 nm) is designed for underwater orientation. To enhance the environmental applicability of the underwater polarisation sensor, a novel sensor model based on the underwater light intensity attenuation coefficient and optical coupling coefficient is established. In addition, concerned with the influence of light intensity uncertainty on sensor performance underwater, an antagonistic polarisation algorithm is adopted for the first time, to improve the accuracy of angle of polarisation and degree of polarisation in the low signal-to-noise ratio environment underwater. Finally, indoor and outdoor experiments are carried out to evaluate the performance of the designed polarisation sensor. The results show that the designed point-source polarisation sensor can acquire polarised light and be used for heading determination underwater.

Interscale kinetic energy transfer in chemically reacting compressible isotropic turbulence is studied using numerical simulations at turbulent Mach numbers 0.2 and 0.8 for isothermal and exothermic reactions. At low turbulent Mach number $M_{t}=0.2$ for exothermic reaction, heat release greatly enhances expansion and compression motions, and induces the formation of shocklets which are not observed for isothermal reaction at the same turbulent Mach number. It is found that heat release through exothermic reactions enhances both the positive and the negative components of pressure–dilatation, as well as positive and negative components of subgrid-scale (SGS) kinetic energy flux, indicating an increase of both forward-scatter and backscatter of kinetic energy. The SGS flux of kinetic energy has a tendency to be from large scales to small scales. The solenoidal components of pressure–dilatation and SGS kinetic energy flux are minorly influenced by heat release of reaction, while the dilatational components of pressure–dilatation and SGS kinetic energy flux are significantly intensified by heat release at all length scales. Heat release enhances the kinetic energy of the dilatational mode through the pressure work, and leads to the increase of dilatational kinetic energy transfer from large scales to small scales through dilatational SGS flux, as well as the viscous dissipation of dilatational kinetic energy at small scales. Taylor Reynolds number has a minor influence on the qualitative statistical properties of interscale kinetic energy transfer terms.

CrFeNiTix (x = 0.2, 0.3, 0.4, 0.5, and 0.6 molar ratio) compositionally complex alloys were fabricated by vacuum arc melting to investigate the microstructure, hardness, and compressive properties. The results revealed that CrFeNiTix alloys consisted of the principal face-centered cubic (FCC) phase and body-centered cubic (BCC) solid solution, with an amount of (Ni, Ti)-rich hexagonal close-packed phase. CrFeNiTix alloys exhibited the typical dendrite. Ti0.2 and Ti0.3 alloys were composed of FCC and BCC solid solutions in the dendrite, as well as ε (Ni3Ti) and R (Ni2.67Ti1.33) phases in the inter-dendrite, simultaneously. For Ti0.4, Ti0.5, and Ti0.6 alloys, (Fe, Cr)-rich solid solution separated out and ε phase transformed into R phase gradually. Meanwhile, TEM analysis indicated that Ti0.4 alloy matrix consisted of the principal FCC phase containing (Ni, Ti)-rich intragranular nanoprecipitates. The hardness values of CrFeNiTix alloys were increased with the addition of Ti content and the high compressive strength of CrFeNiTix alloys was maintained, which was attributed to the solid solution strengthening and precipitation hardening.

In inertial confinement fusion experiments that involve short-laser pulses such as fast ignition (FI), diagnosis of neutrons is usually very challenging because high-intensity γ rays generated by short-laser pulses would mask the much weaker neutron signal. In this paper, fast-response scintillators with low afterglow and gated microchannel plate photomultiplier tubes are combined to build neutron time-of-flight (nTOF) spectrometers for such experiments. Direct-drive implosion experiments of deuterium-gas-filled capsules were performed at the Shenguang-II Upgrade (SG-II-UP) laser facility to study the compressed fuel areal density (〈ρR〉) and evaluate the performance of such nTOF diagnostics. Two newly developed quenched liquid scintillator detectors and a gated ultrafast plastic scintillator detector were used to measure the secondary DT neutrons and primary DD neutrons, respectively. The secondary neutron signals were clearly discriminated from the γ rays from (n, γ) reactions, and the compressed fuel areal density obtained with the yield-ratio method agrees well with the simulations. Additionally, a small scintillator decay tail and a clear DD neutron signal were observed in an integrated FI experiment as a result of the low afterglow of the oxygen-quenched liquid scintillator.

For any given matrix A ∈ℂnxn, a preconditioner tU(A) called the superoptimal preconditioner was proposed in 1992 by Tyrtyshnikov. It has been shown that tU(A) is an efficient preconditioner for solving various structured systems, for instance, Toeplitz-like systems. In this paper, we construct the superoptimal preconditioners for different functions of matrices. Let f be a function of matrices from ℂnxn to ℂnxn. For any A ∈ ℂ nxn, one may construct two superoptimal preconditioners for f(A): tU(f(A)) and f(tU(A)). We establish basic properties of tU(f(A)) and f(tU(A)) for different functions of matrices. Some numerical tests demonstrate that the proposed preconditioners are very efficient for solving the system f(A)x = b.

Toxoplasma gondii is a major cause of congenital brain disease; however, the underlying mechanism of neuropathogenesis in brain toxoplasmosis remains elusive. To explore the role of T. gondii in the development of neural stem cells (NSCs), NSCs were isolated from GD14 embryos of ICR mice and were co-cultured with tachyzoites of T. gondii RH strain. We found that apoptosis levels of the NSCs co-cultured with 1×106 RH tachyzoites for 24 and 48 h significantly increased in a dose-dependent manner, as compared with the control. Western blotting analysis displayed that the protein level of C/EBP homologous protein (CHOP) was up-regulated, and caspase-12 and c-Jun N-terminal kinase (JNK) were activated in the NSCs co-cultured with the parasites. Pretreatment with endoplasmic reticulum stress (ERS) inhibitor (TUDCA) and caspase-12 inhibitor (Z-ATAD-FMK) inhibited the expression or activation of the key molecules involved in the ERS-mediated apoptotic pathway, and subsequently decreased the apoptosis levels of the NSCs induced by the T. gondii. The findings here highlight that T. gondii induced apoptosis of the NSCs through the ERS signal pathway via activation of CHOP, caspase-12 and JNK, which may constitute a potential molecular mechanism responsible for the cognitive disturbance in neurological disorders of T. gondii.

Primers bearing restriction enzyme sites for EcoR I and Hind III were designed according to the known partial cDNA sequence for gibberellin-induced cysteine-rich protein and were then used to amplify the full-length open reading frame (ORF) and signal peptide-truncated fragment of the gcgasa gene. Two fragments with lengths 319 and 238 bp were obtained and were further cloned into plasmid pET-32(a). Following transformation into Escherichia coli BL21(DE3), the fusion proteins were observed to appear at ~26.0 and 25.2 kDa after induction from 1 mmol/l isopropyl-beta-D-thiogalactopyronoside (IPTG). The results of sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and transmission electron microscopy (TEM) of an ultra-thin section revealed that the presence of signal peptide gave rise to the formation of an inclusion body located in the periplasmic space; however, the absence of signal peptide greatly enhanced the solubility of the target protein. The expressed soluble protein was further purified by Ni2+-NTA affinity chromatography and gel filtration methods.

Mg82Al8Ca10 was determined to be a pseudo-binary eutectic composition [liquid solidifying into α–Mg and (Mg,Al)2Ca in the Mg–Al–Ca ternary system with a eutectic melting temperature of 789 K]. A series of Mgx(Al0.44Ca0.56)100−x alloys, where 75 ≤ x ≤ 95, were cast into Φ4 mm rods using copper mold casting. The eutectic alloy exhibits the highest fracture strength, σf = 609 MPa. For 75 ≤ x ≥ 79, the alloys have hypereutectic microstructures with Mg2Ca as the primary phase, and σf is reduced together with diminishing plasticity. For hypoeutectic alloys with 86 ≤ x ≥ 95, the volume fraction of the primary α–Mg dendrites dispersed in the eutectic matrix increases with increasing x, resulting in a gradual decrease of the yield and fracture strengths but improved plastic strain to as large as 9%. The refined microstructures created in bulk samples via chill casting can lead to a good combination of strength and plasticity, with specific strength superior to commercial Mg alloys.