An advanced deformable Kirkpatrick–Baez (K-B) mirror system was developed, equipped with high-speed piezoelectric actuators, and designed to induce beam decoherence and significantly enhance the quality of X-ray imaging by minimizing undesirable speckles in synchrotron radiation or free-electron laser facilities. Each individual mirror is engineered with 36 independent piezoelectric actuators that operate in a randomized manner, orchestrating the mirror surface to oscillate at a high frequency up to 100 kHz. Through in situ imaging single-slit diffraction measurement, it has been demonstrated that this high-frequency-vibration mirror system is pivotal in disrupting the coherent nature, thereby diminishing speckle formation. The impact of the K-B mirror system is profound, with the capability to reduce the image contrast to as low as 0.04, signifying a substantial reduction in speckle visibility. Moreover, the coherence of the X-ray beam is significantly lowered from an initial value exceeding 80% to 13%.

The self-generated magnetic field in three-dimensional (3-D) single-mode ablative Rayleigh–Taylor instability (ARTI) relevant to the acceleration phase of a direct-drive inertial confinement fusion (ICF) implosion is investigated. It is found that stronger magnetic fields up to a few thousand teslas can be generated by 3-D ARTI rather than by its two-dimensional (2-D) counterpart. The Nernst effects significantly alter the magnetic field convection and amplify the magnetic fields. The magnetic field of thousands of teslas yields the Hall parameter of the order of unity, leading to profound magnetized heat flux modification. While the magnetic field significantly accelerates the bubble growth in the short-wavelength 2-D modes through modifying the heat fluxes, the magnetic field mostly accelerates the spike growth but has little influence on the bubble growth in 3-D ARTI. The accelerated growth of spikes in 3-D ARTI is expected to enhance material mixing and degrade ICF implosion performance. This work is focused on a regime relevant to direct-drive ICF parameters at the National Ignition Facility, and it also covers a range of key parameters that are relevant to other ICF designs and hydrodynamic/astrophysical scenarios.

We systematically study the dissipative anomaly in compressible magnetohydrodynamic (MHD) turbulence using direct numerical simulations, and show that the total dissipation remains finite as viscosity diminishes. The dimensionless dissipation rate $\mathcal {C}_{\varepsilon }$ fits well with the model $\mathcal {C}_{\varepsilon } = \mathcal {C}_{\varepsilon,\infty } + \mathcal {D}/R_L^-$ for all levels of flow compressibility considered here, where $R_L^-$ is the generalized large-scale Reynolds number. The asymptotic value $\mathcal {C}_{\varepsilon,\infty }$ describes the total energy transfer flux, and decreases with increase of the flow compressibility, indicating non-universality of the dimensionless dissipation rate in compressible MHD turbulence. After introducing an empirically modified dissipation rate, the data from compressible cases collapse to a form similar to the incompressible MHD case depending only on the modified Reynolds number.

Environmental exposures are known to be associated with pathogen transmission and immune impairment, but the association of exposures with aetiology and severity of community-acquired pneumonia (CAP) are unclear. A retrospective observational study was conducted at nine hospitals in eight provinces in China from 2014 to 2019. CAP patients were recruited according to inclusion criteria, and respiratory samples were screened for 33 respiratory pathogens using molecular test methods. Sociodemographic, environmental and clinical factors were used to analyze the association with pathogen detection and disease severity by logistic regression models combined with distributed lag nonlinear models. A total of 3323 CAP patients were included, with 709 (21.3%) having severe illness. 2064 (62.1%) patients were positive for at least one pathogen. More severe patients were found in positive group. After adjusting for confounders, particulate matter (PM) 2.5 and 8-h ozone (O3-8h) were significant association at specific lag periods with detection of influenza viruses and Klebsiella pneumoniae respectively. PM10 and carbon monoxide (CO) showed cumulative effect with severe CAP. Pollutants exposures, especially PM, O3-8h, and CO should be considered in pathogen detection and severity of CAP to improve the clinical aetiological and disease severity diagnosis.

This paper retrospectively analysed the prevalence of macrolide-resistant Mycoplasma pneumoniae (MRMP) in some parts of China. Between January 2013 and December 2019, we collected 4,145 respiratory samples, including pharyngeal swabs and alveolar lavage fluid. The highest PCR-positive rate of M. pneumoniae was 74.5% in Beijing, the highest resistance rate was 100% in Shanghai, and Gansu was the lowest with 20%. The highest PCR-positive rate of M. pneumoniae was 74.5% in 2013, and the highest MRMP was 97.4% in 2019; the PCR-positive rate of M. pneumoniae for adults in Beijing was 17.9% and the MRMP was 10.48%. Among the children diagnosed with community-acquired pneumonia (CAP), the PCR-positive and macrolide-resistant rates of M. pneumoniae were both higher in the severe ones. A2063G in domain V of 23S rRNA was the major macrolide-resistant mutation, accounting for more than 90%. The MIC values of all MRMP to erythromycin and azithromycin were ≥ 64 μg/ml, and the MICs of tetracycline and levofloxacin were ≤ 0.5 μg/ml and ≤ 1 μg/ml, respectively. The macrolide resistance varied in different regions and years. Among inpatients, the macrolide-resistant rate was higher in severe pneumonia. A2063G was the common mutation, and we found no resistance to tetracycline and levofloxacin.

The collector for separating diasporic bauxite serves as a type of flotation reagent by adsorbing selectively on diaspore to make it hydrophobic enough to separate it from the aluminosilicates. Although the flotation process is considered economical in the desilication of Chinese diasporic bauxite, the existing collectors fail to separate these ores because of their poor adsorption selectivity over other minerals. The present study was an attempt to seek a collector for selective flotation of diaspore over aluminosilicates. A novel carboxyl hydroxamic acid compound, 2,2-bis(hydroxycarbamoyl) decanoic acid (BHDA), was designed and synthesized, and the flotation behavior of diaspore, kaolinite, and illite was investigated by flotation tests with BHDA. The interactions between the BHDA and the minerals were also explored by Fourier-transform infrared spectroscopy (FTIR), zeta-potential measurement, and density functional theory (DFT) calculation. Using BHDA as the collector, the pulp pH value affected the floatability of diaspore significantly while the floatability of kaolinite or illite was unaffected or only slightly affected. The dosage of BHDA had little effect on the floatability of the three minerals. The greatest difference in floatability between diaspore and aluminosilicates occurred at mid-range pulp pH (7). Large shifts in characteristic absorption peaks and new absorption peaks were observed for BHDA-treated diaspore but were absent from BHDA-treated aluminosilicates. The change in the negative zeta potential of diaspore was also greater than those of aluminosilicates in the presence of BHDA. The O atoms in the carboxyl and hydroxycarbamoyl of BHDA have highly negative charges, and favorable stereo conditions existed to form five- or six-membered rings, resulting in their coordination with the Al atoms of diaspore, leading to chemisorption in chelate rings; the adsorption of BHDA on kaolinite or illite, on the other hand, was mainly physical in nature. The BHDA was, therefore, highly selective in the flotation between diaspore and aluminosilicates and possibly suitable for the separation of diasporic bauxite.

Vitrification has been widely used for oocyte cryopreservation, but there is still a need for optimization to improve clinical outcomes. In this study, we compared the routine droplet merge protocol with modified multi-gradient equilibration vitrification for cryopreservation of mouse oocytes at metaphase II. Subsequently, the oocytes were thawed and subjected to intracytoplasmic sperm injection (ICSI). Oocyte survival and spindle status were evaluated by morphology and immunofluorescence staining. Moreover, the fertilization rates and blastocyst development were examined in vitro. The results showed that multi-gradient equilibration vitrification outperformed droplet merge vitrification in terms of oocyte survival, spindle morphology, blastocyst formation, and embryo quality. In contrast, droplet merge vitrification exhibited decreasing survival rates, a reduced proportion of oocytes with normal spindle morphology, and lower blastocyst rates as the number of loaded oocytes increased. Notably, when more than six oocytes were loaded, reduced oocyte survival rates, abnormal oocyte spindle morphology, and poor embryo quality were observed. These findings highlight that the vitrification of mouse metaphase II oocytes by the modified multi-gradient equilibration vitrification has the advantage of maintaining oocyte survival, spindle morphology, and subsequent embryonic development.

The third-order law links energy transfer rates in the inertial range of magneto- hydrodynamic (MHD) turbulence with third-order structure functions. Anisotropy, a typical property in the solar wind, challenges the applicability of the third-order law with the isotropic assumption. To shed light on the energy transfer process in the presence of anisotropy, we conducted direct numerical simulations of forced MHD turbulence with normal and hyper-viscosity under various strengths of the external magnetic field ($B_0$), and calculated three forms of third-order structure function with or without averaging of the azimuthal or polar angles with respect to $B_0$ direction. Correspondingly, three estimated energy transfer rates were obtained. The result shows that the peak of normalized third-order structure function occurs at larger scales closer to the $B_0$ direction, and the maximum of longitudinal transfer rates shifts away from the $B_0$ direction at larger $B_0$. Compared with normal viscous cases, hyper-viscous cases can attain better separated inertial range, thus facilitating the estimation of the energy cascade rates. We find that the widespread use of the isotropic form of the third-order law in estimating the energy transfer rates is questionable in some cases, especially when the anisotropy arising from the mean magnetic field is inevitable. In contrast, the direction-averaged third-order structure function properly accounts for the effect of anisotropy and predicts the energy transfer rates and inertial range accurately, even at very high $B_0$. With limited statistics, the third-order structure function shows a stronger dependence on averaging of azimuthal angles than the time, especially for high $B_0$ cases. These findings provide insights into the anisotropic effect on the estimation of energy transfer rates.

Multilayer dielectric gratings (MLDGs) are crucial for pulse compression in picosecond–petawatt laser systems. Bulged nodular defects, embedded in coating stacks during multilayer deposition, influence the lithographic process and performance of the final MLDG products. In this study, the integration of nanosecond laser conditioning (NLC) into different manufacturing stages of MLDGs was proposed for the first time on multilayer dielectric films (MLDFs) and final grating products to improve laser-induced damage performance. The results suggest that the remaining nodular ejection pits introduced by the two protocols exhibit a high nanosecond laser damage resistance, which remains stable when the irradiated laser fluence is more than twice the nanosecond-laser-induced damage threshold (nanosecond-LIDT) of the unconditioned MLDGs. Furthermore, the picosecond-LIDT of the nodular ejection pit conditioned on the MLDFs was approximately 40% higher than that of the nodular defects, and the loss of the grating structure surrounding the nodular defects was avoided. Therefore, NLC is an effective strategy for improving the laser damage resistance of MLDGs.

Before the Omicron variant ran amok inside China in November 2022, the Chinese central government’s dynamic zero-COVID policy effectively contained the spread of the coronavirus and its variants during multiple waves of outbreaks. However, it was not without cost. This study examines the impacts of stringent lockdown interventions on urban residents’ mental health during the initial outbreak of the Omicron variant in the spring of 2022. Using survey data from 522 respondents within the same neighbourhood and a spatial quasi-experimental design, the results show that strict lockdown interventions are significantly related to higher levels of psychological distress after controlling for observed confounders and that lockdown interventions have further spillover effects on mental health for residents in adjacent residential compounds who are otherwise free. Moreover, the results show that the lack of material supplies and medical care plays a more salient role in explaining lockdown effects on psychological distress than residents’ social interaction and trust levels of COVID-19 policy. Policy and intervention implications are also discussed.

High-molecular-weight glutenin subunits (HMW-GS) contribute to dough elasticity and bread baking quality in wheat. In this study, wheat varieties were classified based on their HMW-GS composition into three groups: 1Dx5 (5 + 10, Gaoyou 8901, Xinmai 28, Xinmai 19, Xinmai 26 and Jinbaoyin), 1Dx2 (2 + 12, Zhoumai 24, Xinmai 9 and Yumai) and 1Dx4 (4 + 12, Aikang 58). Sequence analysis showed that 1Dx-GY8901, 1Dx-XM28, 1Dx-XM19 and 1Dx-XM26 were similar to the 1Dx5 gene and clustered on the same branch, while 1Dx-AK58, 1Dx-ZM24, 1Dx-JBY, 1Dx-YM, 1Dx-XM9 and 1Dx-JBY were more similar to the 1Dx2 gene and clustered on the same branch with 1Dx.2.2. There was a mutation of Ser to Cys at position S2, for an extra Cys in the repeat regions of 1Dx-XM19, 1Dx-XM26, 1Dx-XM28 and 1Dx-GY8901. The wheat HMW-GS genes exhibited similar percentages of α-helix, extended strand, β-turn and random coil structure, with ranges of 13.33–13.59, 4.77–5.78, 7.08–9.18 and 72.3–73.94%, respectively. Sequence conservation and the composition of HMW-GS subunits were also analysed for a series of strong gluten wheat varieties, Xinmai 9 (1, 7 + 8, 2 + 12), Xinmai 19 (1, 7 + 9, 5 + 10), Xinmai 26 (1, 7 + 8, 5 + 10) and Xinmai 28 (1, 7 + 9, 5 + 10). The results of this work should facilitate future breeding efforts and provide the theoretical basis for wheat quality improvement.

The extinct family Hylicellidae, as the ancestral group of modern cicadomorphans, had a wide distribution and a very high species-level biodiversity from the Triassic to Early Cretaceous. We herein report 11 new hylicellid specimens from the Jurassic Daohugou beds of Inner Mongolia, NE China, and execute geometric morphometric analysis (GMA) to elucidate their systematic position. Our GMA and subsequent morphometric statistics indicate that 10 of our new specimens can be compared to the holotype of Cycloscytina gobiensis, and one is new to science. Cycloscytina incompleta new species is erected based on this specimen, with the following discriminatory tegminal traits: C3 almost as long as and slightly narrower than C2, and the forking position of stem M distinctly migrates towards wing apex and much apicad of the stem CuA bifurcating. Additionally, Cycloscytina plachutai is herein transferred to the procercopid genus Procercopina, resulting in P. plachutai new combination. To date, just a few body structures of Hylicellidae have been revealed, and the new whole-bodied hylicellids reported herein provide some novel insights on the evolution of basal Clypeata. This study also emphasizes the use of morphometric analysis in the systematics of wing-bearing insects such as hylicellids.

UUID: http://zoobank.org/84a67eba-9b7c-4e27-a436-764802c4cdfb.

The aim of this study was to evaluate the association between prenatal and neonatal period exposures and the risk of childhood and adolescent nasopharyngeal carcinoma (NPC). From January 2009 to January 2016, a total of 46 patients with childhood and adolescent NPC (i.e., less than 18 years of age) who were treated at Sun Yat-sen University Cancer Center were screened as cases, and a total of 45 cancer-free patients who were treated at Sun Yat-sen University Zhongshan Ophthalmic Center were selected as controls. The association between maternal exposures during pregnancy and obstetric variables and the risk of childhood and adolescent NPC was evaluated using logistic regression analysis. Univariate analysis revealed that compared to children and adolescents without a family history of cancer, those with a family history of cancer had a significantly higher risk of childhood and adolescent NPC [odds ratios (OR) = 3.15, 95% confidence interval (CI) = 1.02–9.75, P = 0.046], and the maternal use of folic acid and/or multivitamins during pregnancy was associated with a reduced risk of childhood and adolescent NPC in the offspring (OR = 0.07, 95% CI = 0.02–0.25, P < 0.001). After multivariate analysis, only the maternal use of folic acid and/or multivitamins during pregnancy remained statistically significant. These findings suggest that maternal consumption of folic acid and/or multivitamins during pregnancy is associated with a decreased risk of childhood and adolescent NPC in the offspring.