Obesity is an established risk factor for hypertension, but the mechanisms are only partially understood. We examined whether body mass index (BMI)-related DNA methylation (DNAm) variation would mediate the association of BMI with blood pressure (BP). We first conducted a genomewide DNA methylation analysis in monozygotic twin pairs to detect BMI-related DNAm variation and then evaluated the mediating effect of DNAm on the relationship between BMI and BP levels using the causal inference test (CIT) method and mediation analysis. Ontology enrichment analysis was performed for CpGs using the GREAT tool. A total of 60 twin pairs for BMI and systolic blood pressure (SBP) and 58 twin pairs for BMI and diastolic blood pressure (DBP) were included. BMI was positively associated with SBP (β = 1.86, p = .0004). The association between BMI and DNAm of 85 CpGs reached p < 1×10–4 level. Eleven BMI-related differentially methylated regions (DMRs) within LNCPRESS1, OGDHL, RNU1-44P, NPHS1, ECEL1P2, LLGL2, RNY4P15, MOGAT3, PHACTR3, and BAI2 were found. Of the 85 CpGs, 9 mapped to C10orf71-AS1, NDUFB5P1, KRT80, BAI2, ABCA2, PEX11G and FGF4 were significantly associated with SBP levels. Of the 9 CpGs, 2 within ABCA2 negatively mediated the association between BMI and SBP, with a mediating effect of −0.24 (95% CI [−0.65, −0.01]). BMI was also positively associated with DBP (β = 0.60, p = .0495). The association between BMI and DNAm of 193 CpGs reached p < 1×10−4 level. Twenty-five BMI-related DMRs within OGDHL, POU4F2, ECEL1P2, TTC6, SMPD4, EP400, TUBA1C and AGAP2 were found. Of the 193 CpGs, 33 mapped to ABCA2, ADORA2B, CTNNBIP1, KDM4B, NAA60, RSPH6A, SLC25A19 and STIL were significantly associated with DBP levels. Of the 33 CpGs, 12 within ABCA2, SLC25A19, KDM4B, PTPRN2, DNASE1, TFCP2L1, LMNB2 and C10orf71-AS1 negatively mediated the association between BMI and DBP, with a total mediation effect of −0.66 (95% CI [−1.07, −0.30]). Interestingly, BMI might also negatively mediate the association between the DNAm of most CpG mediators mentioned above and BP. The mediating effect of DNAm was also found when stratified by sex. In conclusion, DNAm variation may partially negatively mediate the association of BMI with BP. Our findings may provide new clues to further elucidate the pathogenesis of obesity to hypertension and identify new diagnostic biomarkers and therapeutic targets for hypertension.

Lymph node tuberculosis is particularly common in regions with a high tuberculosis burden, and it has a great risk of rupture. This study aims to investigate the utility of ultrasound multimodal imaging in predicting the rupture of cervical tuberculous lymphadenitis (CTL). 128 patients with unruptured CTL confirmed by pathology or laboratory tests were included. Various ultrasonic image features, including long-to-short-axis ratio (L/S), margin, internal echotexture, coarse calcification, Color Doppler Flow Imaging (CDFI), perinodal echogenicity, elastography score, and non-enhanced area proportion in contrast-enhanced ultrasound (CEUS), were analyzed to determine their predictive value for CTL rupture within a one-year follow-up period. As a result, L/S (P < 0.001), margin (P < 0.001), internal echotexture (P < 0.001), coarse calcification (P < 0.001), perinodal echogenicity (P < 0.001), and the area of non-enhancement in CEUS (P < 0.001) were identified as significant imaging features for predicting CTL rupture. The prognostic prediction showed a sensitivity of 89.29%, specificity of 100%, accuracy of 95.31%, respectively. Imaging findings such as L/S < 2, unclear margin, heterogeneous internal echotexture, perinodal echogenicity changed, and non-enhancement area in CEUS > 1/2, are indicative of CTL rupture, while coarse calcification in the lymph nodes is associated with a favorable prognosis.

Todorokite is a common Mn oxide (with a tunnel structure) in the Earth surface environment, and can be obtained by hydrothermal treatment or refluxing process from precursor buserite with a layered structure. Several chemical reaction conditions for the phase transformation from Na-buserite to todorokite at atmospheric pressure were investigated, including temperature, pH, crystallinity of precursor Na-buserite, the amount of the interlayer Mg2+ of the Mg-buserite and clay minerals. The results showed that the conversion rate and crystallinity of todorokite decreased with falling temperature, and Mg-buserite could not be completely transformed to todorokite at lower temperatures (40°C). The poorly crystalline Na-buserite could be converted into todorokite more easily than highly crystalline Na-buserite. Todorokite can be prepared at pH 5–9, but the rate of conversion and crystallinity of todorokite did vary with pH in the order: neutral ≈ alkali > acidic. The conversion rate of todorokite decreased with decreasing interlayer Mg2+ content of the Mg-buserite. The presence of montmorillonite or goethite slowed the formation reaction of todorokite in the refluxing process, and the reaction time was prolonged when the amounts of those minerals were increased.

The construction of organic-inorganic hybrid ferroelectric materials with larger, high-polarity guest molecules intercalated in kaolinite (K) faces difficulties in terms of synthesis and uncertainty of structure-property relationships. The purpose of the present study was to optimize the synthesis method and to determine the mechanism of ferroelectric behavior of kaolinite intercalated with p-aminobenzamide (PABA), with an eye to improving the design of intercalation methods and better utilization of clay-based ferroelectric materials. The K-PABA intercalation compound (chemical formula Al2Si2O5(OH)4∙(PABA)0.7) was synthesized in an autoclave and then characterized using X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The experimental results showed that PABA expanded the kaolinite interlayer from 7.2 Å to 14.5 Å, and the orientation of the PABA molecule was ~70° from the plane of the kaolinite layers. The amino group of the PABA molecule was close to the Si sheet. The presence of intermolecular hydrogen bonds between kaolinite and PABA and among PABA molecules caused macro polarization of K-PABA and dipole inversion under the external electric field, resulting in K-PABA ferroelectricity. Simulation calculations using the Cambridge Sequential Total Energy Package (CASTEP) and the ferroelectricity test revealed the optimized intercalation model and possible ferroelectric mechanism.

Compound bubbles with a liquid coating in another continuous immiscible bulk phase are ubiquitous in a wide range of natural and industrial processes. Their formation, rise and ultimate bursting at the air–liquid interface play crucial roles in the transport and fate of natural organic matter and contaminants. However, the dynamics of compound bubbles has not received considerable attention until recently. Here, inspired by our previous work (Yang et al., Nat. Phys., vol. 19, 2023, pp. 884–890), we investigate the entrainment of daughter oil droplets in bulk water produced by a bursting oil-coated bubble. We document that the size of the entrained daughter oil droplet is affected by the oil coating fraction and the bulk liquid properties. We rationalize this observation by balancing the viscous force exerted by the extensional flow produced by bubble bursting with the capillary force resisting the deformation of the oil coating, and considering the subsequent end-pinching process which finally entrains the daughter oil droplets. We propose a scaling analysis for the daughter oil droplet size that well captures the experimental results for a wide range of oil coating fractions and Ohnesorge numbers of the bulk liquid. In addition, we discuss the non-monotonic variation of daughter droplet size with the Ohnesorge number, and show the eventual absence of daughter droplets because of the strong viscous effect in the high-Ohnesorge-number regime. Our findings may advance the fundamental understanding of compound bubble bursting and provide guidance and modelling constraints for bubble-mediated contaminant transport in liquids.

Fast neutron absorption spectroscopy is widely used in the study of nuclear structure and element analysis. However, due to the traditional neutron source pulse duration being of the order of nanoseconds, it is difficult to obtain a high-resolution absorption spectrum. Thus, we present a method of ultrahigh energy-resolution absorption spectroscopy via a high repetition rate, picosecond duration pulsed neutron source driven by a terawatt laser. The technology of single neutron count is used, which results in easily distinguishing the width of approximately 20 keV at 2 MeV and an asymmetric shape of the neutron absorption peak. The absorption spectroscopy based on a laser neutron source has one order of magnitude higher energy-resolution power than the state-of-the-art traditional neutron sources, which could be of benefit for precisely measuring nuclear structure data.

The motion of a long gas bubble in a confined capillary tube is ubiquitous in a wide range of engineering and biological applications. While the understanding of the deposited thin viscous film near the tube wall in Newtonian fluids is well developed, the deposition dynamics in commonly encountered non-Newtonian fluids remains much less studied. Here, we investigate the dynamics of a confined bubble moving in shear-thinning fluids with systematic experiments, varying the zero-shear-rate capillary number $Ca_0$ in the range of $O(10^{-3}\unicode{x2013}10^2)$ considering the zero-shear-rate viscosity. The thickness of the deposited liquid film, the bubble speed and the bubble front/rear menisci are measured, which are further rationalized with the recent theoretical studies based on appropriate rheological models. Compared with Newtonian fluids, the film thickness decreases for both the carboxymethyl cellulose and Carbopol solutions when the shear-thinning effect dominates. We show that the film thickness follows the scaling law from Aussillous & Quéré (Phys. Fluids, vol. 12, no. 10, 2000, pp. 2367–2371) with an effective capillary number $Ca_e$, considering the characteristic shear rate in the film as proposed by Picchi et al. (J. Fluid Mech., vol. 918, no. A7, 2021, pp. 1–30). $Ca_e$ is calculated by the Carreau number and the power-law index from the Carreau–Yasuda rheological model. The shear-thinning effect also influences the bubble speed and delays the transition to the parabolic region in the bubble front and rear menisci. In particular, a high degree of undulations on the bubble surface results in an intricate rear viscosity distribution for the rear meniscus and the deviation between the experiments and theory may require a further investigation to resolve the axial velocity field. Our study may advance the fundamental understandings and engineering guidelines for coating processes involving thin-film flows and non-Newtonian fluids.

The influence of second-order dispersion (SOD) on stimulated Raman scattering (SRS) in the interaction of an ultrashort intense laser with plasma was investigated. More significant backward SRS was observed with the increase of the absolute value of SOD ($\mid \kern-1pt\!{\psi}_2\!\kern-1pt\mid$). The integrated intensity of the scattered light is positively correlated to the driver laser pulse duration. Accompanied by the side SRS, filaments with different angles along the laser propagation direction were observed in the transverse shadowgraph. A model incorporating Landau damping and above-threshold ionization was developed to explain the SOD-dependent angular distribution of the filaments.

Recently, the collisionless pitch-angle scattering for relativistic runaway electrons (REs) in toroidal geometries such as tokamaks was discovered through a full orbit simulation approach (Liu et al., Nucl. Fusion, vol. 56, 2016, p. 064002), and it was then theoretically investigated that a new expression for the magnetic moment, including the second-order corrections, could essentially reproduce the so-called collisionless pitch-angle scattering process (Liu et al., Nucl. Fusion, vol. 58, 2018, p. 106018). In this paper, with synchrotron radiation, extensive numerical verification of the validity of the high-order guiding-centre theory is given for simulations involving REs by incorporating such an expression for the magnetic moment into our particle tracing code. A high-order guiding-centre simulation approach with synchrotron radiation (HGSA) is applied. Synchrotron radiation plays an essential role in the life cycle of REs. The energy of REs first increases and then becomes saturated until the electric field acceleration is balanced by the radiation dissipation. Unfortunately, the process cannot be simulated accurately with the standard guiding-centre model, i.e. the first-order guiding-centre model. Remarkably, it is found that the HGSA can effectively produce the fundamental process of REs. Since the time scale of the energy saturation of REs is close to seconds, the computational cost becomes significant. In order to save costs, it is necessary to estimate the time of energy saturation. An analytical estimate is derived for the time it takes for synchrotron drag to balance an accelerating electric field and the provided formula has been numerically verified. Test calculations reveal that HGSA is favourable for exploiting the dynamics of REs in tokamak plasmas.

A pulsed fast neutron source is critical for applications of fast neutron resonance radiography and fast neutron absorption spectroscopy. However, due to the large transversal source size (of the order of mm) and long pulse duration (of the order of ns) of traditional pulsed fast neutron sources, it is difficult to realize high-contrast neutron imaging with high spatial resolution and a fine absorption spectrum. Here, we experimentally present a micro-size ultra-short pulsed neutron source by a table-top laser–plasma wakefield electron accelerator driving a photofission reaction in a thin metal converter. A fast neutron source with source size of approximately 500 μm and duration of approximately 36 ps has been driven by a tens of MeV, collimated, micro-size electron beam via a hundred TW laser facility. This micro-size ultra-short pulsed neutron source has the potential to improve the energy resolution of a fast neutron absorption spectrum dozens of times to, for example, approximately 100 eV at 1.65 MeV, which could be of benefit for high-quality fast neutron imaging and deep understanding of the theoretical model of neutron physics.

In this study, basing on the level-set and point-particle methods, we have developed a numerical methodology for simulating the dynamics of colloidal droplets under flow conditions in which the particle–particle, particle–interface and particle–fluid interactions are all taken into account efficiently. By using this methodology, we have determined the essential role of particle-laden interfaces in the deformation of colloidal droplets in simple shear flow with relatively low particle concentrations. Generally, adsorbed particles strongly enhance the deformability of the whole droplet, which is principally attributed to the particle-induced reduction of the effective surface tension. Systematic simulations are performed to reveal the detailed roles of interparticle interactions and particle surface coverage in the deformation of particle-covered droplets. Most importantly, we find the promotion effect of adsorbed particles on the droplet deformation cannot be completely included via the effective capillary number characterizing the particle-induced overall reduction of the effective surface tension, which is particularly obvious at high particle coverage. We propose two potential reasons for this surprising phenomenon, i.e. the convection-induced non-uniform distribution of adsorbed particles over the droplet surface and the particle-induced reduction of the droplet surface mobility, which have not been discussed yet in previous numerical and experimental studies of particle-covered droplets in shear flow.

HMGR, 3-hydroxy-3-methylglutaryl-CoA reductase, is a major rate-limiting enzyme in mevalonate (MVA) pathway for isoprenoids and subsequent tanshinone biosynthesis in the Chinese traditional bulk herbal medicine Danshen, Salvia miltiorrhiza, mainly for cardiovascular disorders. In this paper, the genomic SmHMGR genes of 38 cultivated populations of S. miltiorrhiza collected in China were for the first time sequenced to reveal the genetic diversity and phylogeny. The SmHMGR gene was shown to be intron-free, 1650~1659 bp in complete CDS with the majority being 1656 bp, and two unique populations (W-FJLY-V-1 and W-SCHY-W-1) being 1659 and 1650 bp respectively. A total of 103 SNP variation sites were detected with a variation rate of 6.22%, most of which occurred in S. miltiorrhiza f. alba population W-SCHY-W-1; a total of 25 amino acid variation sites were found, of which 19 was in W-SCHY-W-1. The same four populations, W-SCHY-W-1, V-HBAG-V-1, V-JLCC-V-1 and S-NM-V-1 could be discriminated from the remaining 34 by both the SNP fingerprints and the deduced amino acid variation sites. Other or composite DNA markers are needed for better identification. The SmHMGR gene of white flower S. miltiorrhiza f. alba population W-SCHY-W-1 is especially rich in variations and worthy of further studies. Phylogenetic trees based on both the gene and the deduced amino acid sequences showed a very similar two-clade topological structure. This research enriched the content and the genetic means for the molecular identification, genetic diversity and phylogenetic studies of the cultivated S. miltiorrhiza populations, and laid a solid foundation for further related and in-depth investigations.

To investigate the association between the Metabolic Score for Visceral Fat (METS-VF) and risk of type 2 diabetes mellitus (T2DM) and compare the predictive value of the METS-VF for T2DM incidence with other obesity indices in Chinese people. A total of 12 237 non-T2DM participants aged over 18 years from the Rural Chinese Cohort Study of 2007–2008 were included at baseline and followed up during 2013–2014. The cox proportional hazards regression was used to calculate hazard ratios (HR) and 95 % CI for the association between baseline METS-VF and T2DM risk. Restricted cubic splines were used to model the association between METS-VF and T2DM risk. Area under the receiver operating characteristic curve (AUC) analysis was used to evaluate the ability of METS-VF to predict T2DM incidence. During a median follow-up of 6·01 (95 % CI 5·09, 6·06) years, 837 cases developed T2DM. After adjusting for potential confounding factors, the adjusted HR for the highest v. lowest METS-VF quartile was 5·97 (95 % CI 4·28, 8·32), with a per 1-sd increase in METS-VF positively associated with T2DM risk. Positive associations were also found in the sensitivity and subgroup analyses, respectively. A significant nonlinear dose–response association was observed between METS-VF and T2DM risk for all participants (Pnonlinearity = 0·0347). Finally, the AUC value of METS-VF for predicting T2DM was largest among six indices. The METS-VF may be a reliable and applicable predictor of T2DM incidence in Chinese people regardless of sex, age or BMI.